Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 

Go Back   Keystone RV Forums > Keystone Fleet | Keystone RV Models > Fifth Wheels
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 02-08-2012, 01:57 PM   #1
RickR
Junior Member
 
Join Date: Feb 2012
Location: Illinois
Posts: 1
Question 2012 Cougar 327RES Spare Tire Issues?

Anyone out there have a similar rig w/ a pullout bike rack on the back end? The mfg. provided spare tire holder on mine has the 4" cross bar winged out and the single bolt holding the entire wheel/tire. First encounter was on the way up to Wisconsin Dells, WI. Pulled into the site, walked around the rig and here is the spare tire hanging by a single bolt. The 4" cross bar was winged out so it would not keep the tire snug to the verticle bar and where the single bolt was holding whole tire was bent. Tried 2x unsuccessfully with my dealer and talking directly to Keystone to get this covered under warranty. No can do. Supposedly, I either bottomed out the back bumper (which the tire can't hit the ground even if it happened) or I hit something with the tire (which if the case it would be winged backwards and not forwards to fall off. Anyone similar issue?
RickR is offline   Reply With Quote
Old 02-08-2012, 03:08 PM   #2
66ken
Senior Member
 
Join Date: May 2010
Location: Plymouth,Ia
Posts: 109
I had the same problem on my 2010 327RES, I talked to Keystone and they had not heard of the problem. I rebuilt the holder with thicker steel and added another bolt, also installed gussets to reinforce it. I have been looking at Lipperts under body mount for the spare. I don't think the bumper is the place for the spare.
__________________
2010 2500HD LTZ Duramax
2010 Cougar 327RES
66ken is offline   Reply With Quote
Old 02-08-2012, 03:21 PM   #3
MILBY
Member
 
Join Date: Apr 2011
Location: Illinois
Posts: 93
Have not had a problem with my 327 but also am looking into getting the spare off the bumper and putting it under the belly. With all the horror stories about that bumper I don't want any suprises
__________________
05 Dodge 2500 5.9 Cummings
327res 2011
MILBY is offline   Reply With Quote
Old 02-08-2012, 03:55 PM   #4
f6bits
Senior Member
 
Join Date: Nov 2011
Location: SoCal
Posts: 1,739
I just saw an older version of my trailer with the spare mounted under the front A frame. My lord, does that hang low! Now I’m having second thoughts about mounting it there. Maybe I’ll find some cross beam for the winch mount.
__________________
-Scott, DW, DG, DB, and DD

2011 Passport 2590BH
2009 Ford F150 SuperCrew FX4 5.4L w/Max Tow
f6bits is offline   Reply With Quote
Old 02-09-2012, 06:25 AM   #5
Ayotte
Senior Member
 
Ayotte's Avatar
 
Join Date: May 2011
Location: Moose Jaw,Saskatchewan
Posts: 154
I don't have the pull out. We have a 2012 cougar x-lite 26sab and the first trip out after about 400km. almost lost the whole rear bumper. From the vibration the welds all cracked where the rear bumper welds to the frame. Had to remove spare-took it back and the dealer reinforced and rewelded it. Seems ok now.
Ayotte is offline   Reply With Quote
Old 02-09-2012, 08:36 AM   #6
msp2jxr
Senior Member
 
Join Date: Feb 2011
Location: Crossville
Posts: 305
We have a 2012 326MKS with the same pull out bike rack and rear tire mount. There have been no problems with the tire for us for the first camping season, but we have been wanting to get the tire off the rear. We recently purchased the Lippert underbody storage bin with tire mount.The DH has not installed it yet since it is still pretty cold here and the trailer is in storage. He is planning on posting pictures when he gets it installed. The tire mount looks slick and the extra storage boxes will be great for the wood blocks and power cord.
__________________
Jay and Lori
2016 Impact 311
2015 Cougar 337 FLS (retired)
2012 Cougar 326MKS (retired)
Mor-Ryde Pin Box
2015 Super Duty F350 6.7 4x4 King Ranch
2008 Super Duty F250 6.4 Diesel 4x4 Lariat (retired)
2005 Goldwing
msp2jxr is offline   Reply With Quote
Old 02-09-2012, 01:40 PM   #7
MILBY
Member
 
Join Date: Apr 2011
Location: Illinois
Posts: 93
hey there MSP I also am looking at that set up or just the winch my question about them is how big are the storage bins and are they lockable.
__________________
05 Dodge 2500 5.9 Cummings
327res 2011
MILBY is offline   Reply With Quote
Old 02-09-2012, 05:19 PM   #8
msp2jxr
Senior Member
 
Join Date: Feb 2011
Location: Crossville
Posts: 305
Hi Milby,

My understorage unit is currently in storage. I do remember the drawers are not lockable. I went to the Lippert website and looked at the dimensions of the boxes and it looks like they are 28" long, 19.2" wide and 8.2 deep. I am looking forward to getting this installed on the trailer and moving that spare tire from the back.

Hope this helps.
__________________
Jay and Lori
2016 Impact 311
2015 Cougar 337 FLS (retired)
2012 Cougar 326MKS (retired)
Mor-Ryde Pin Box
2015 Super Duty F350 6.7 4x4 King Ranch
2008 Super Duty F250 6.4 Diesel 4x4 Lariat (retired)
2005 Goldwing
msp2jxr is offline   Reply With Quote
Old 02-10-2012, 02:00 AM   #9
MILBY
Member
 
Join Date: Apr 2011
Location: Illinois
Posts: 93
Thanks will check it out and maybe call them
__________________
05 Dodge 2500 5.9 Cummings
327res 2011
MILBY is offline   Reply With Quote
Old 02-10-2012, 07:13 AM   #10
byrdr1
Senior Member
 
byrdr1's Avatar
 
Join Date: Sep 2009
Location: North Carolina
Posts: 1,037
UnderChassisStorageFlyer.pdf
__________________

Randy "Camp On"
2011 Cougar 327RES
2014 Ford F-350, 6.7L 4X4, CC, SRW
byrdr1 is offline   Reply With Quote
Old 03-18-2012, 09:59 AM   #11
wire1946
Junior Member
 
Join Date: Mar 2012
Location: Milford,DE
Posts: 6
Thumbs down spare tire and bike rack

I have a res 327 . good unit .but almost lost my spare and bikes going to Fl. the 4x4 square bumper AL. AL.and cant hold the weight of bikes and tire .hitting the bumpers in the road caused the metal to rip at both braised points ,where it is attached .
Good luck to all
wire1946 is offline   Reply With Quote
Old 03-18-2012, 10:31 AM   #12
jsmith948
Senior Member
 
Join Date: Jan 2012
Location: Central San Joaguin Valley, CA
Posts: 2,117
spare tire/bumper

Our Cougar has the slide out bumper/bike rack with the spare wheel mounted in the center of the bumper.
While the bumper is made from light wall square tubing, it is gusseted where it attaches to the sliding frame with the top corner of the tubing even with the top of the frame preventing a lot of the vertical twisting and making for a stronger welded joint
The only problem we had was that the wheel was attached to the vertical post with a carriage bolt and the square shank portion of the carriage bolt is longer than the material through which it is mounted is thick. This prevented the lug nut from tightening up against the wheel and allowed the wheel to shake and wobble.
A large, thick washer was all that was needed as a spacer.
I don't know if I would leave the spare wheel on the mount if I were to travel with the bumper extended due to the "play" in the slide rails allowing for a grat deal of up and down movement with the expected dynamic loading placed on the sliding bumper.
__________________

Jack & Marty
2018 Laredo 298 SRL
2011 F-250 SB Crew Cab 4x4 6.7L
jsmith948 is offline   Reply With Quote
Old 03-18-2012, 03:23 PM   #13
LarryL
Senior Member
 
LarryL's Avatar
 
Join Date: Feb 2011
Location: calif
Posts: 193
I have a MKS326 Cougar with slide out bike rack I put the spare tire in the
basement to could not tighten the spare didn't like it hanging off
the bumper with the bikes on to much weight.
Like the Lippert underbody storage bin with tire mount but lots
of money there but cool maybe some day.
__________________
2500HD Chev 6.0
2011 326MKS Cougar
LarryL is offline   Reply With Quote
Old 03-22-2012, 04:00 PM   #14
chuck5180
Junior Member
 
Join Date: Feb 2012
Location: Ft Wayne Indiana
Posts: 8
Spare tire mount

I had the same issue 1st trip out, just doubled thickness to cure problem. My dealer Barton lake in Angola In. fixed all the other small issues . Really good dealer to work with. The 1st trip was about 2600 miles, tows very well and that air ride pin makes a huge difference. I pull with a 2008 Ford 250 sd, 6.4 diesel power. Happy trails to all.
chuck5180 is offline   Reply With Quote
Old 04-02-2012, 02:38 PM   #15
Comptech
Senior Member
 
Comptech's Avatar
 
Join Date: Mar 2012
Location: Virginia Beach
Posts: 250
So I have a 2012 330RBK with the rear storage slide out and spare mounted to it. I have not had anytime to play with it as our RV is parked in the yard in such a way I can not pull it out. SO is the key here, not to travel with the rear storage slide out and loaded with bikes and such? Maybe I should look at adding some more support bars or welds?
__________________

2012 Cougar 330RBK
GVWR 12,265
2004 Ford F-350
Comptech is offline   Reply With Quote
Old 04-02-2012, 03:16 PM   #16
Tom and Kelley Crawford
Member
 
Join Date: Jan 2010
Posts: 56
We have a 2010 327RES and if my memory is correct, they had a recall on the spare tire mount right after we got our Cougar. We took it to the dealership and when we got it back it was terrible. Tire was always loose and close to falling off and bent bar holding it on. I took it back and they said I must have hit something to bend the mounting (I had not) but they did fix it. It was no better and I had to jury rig it to keep it from falling off. Very poor design.
__________________
Tom and Kelley Crawford
Land O Lakes, FL
Cougar 327RES
Tom and Kelley Crawford is offline   Reply With Quote
Old 04-02-2012, 07:28 PM   #17
RCrawler
Senior Member
 
Join Date: Jun 2011
Location: Southern Oregon
Posts: 118
So far, I haven't had any issues with cracking on mine. I run with the bumper extended and have a 4- bike rack mounted on behind that.

I'm going to cut off the thin sheetmetal bumper and replace it with some thicker wall material. And since the spare drags going up the driveway, I'm going to redesign the mount so that it is higher and solidly mounted to the bumper, with no more cute little u-bolts. I really like the toolbox that was mounted and I might do something similar with the slide out rack to get rid of some Rubbermaid containers.

Jason
__________________
'11.5 (EDITED) 3500 CCLB 4x4 (EDITED) 6.7 HO, auto, DPF and EGR deleted by (EDITED) , Mini Maxx, 5" exhaust,

'12 (EDITED) 324RLB- 3 bedroom, 1 1/2 bath
RCrawler is offline   Reply With Quote
Old 04-12-2012, 11:27 AM   #18
chuckretnav
Member
 
Join Date: Jul 2010
Location: Indiana
Posts: 91
Smile 327res and Spare on the Rear

Second camping trip on the way home wife see a Mick D (Mcdonald) that has truck parking. we got in ok no problem. the drive had a dip in it and should of been more observent of how deep the dip was. Coming out did not feel a thing. Got to the home 20 and was checking things before I backed in and both of my spares (yes two) where pulled out to the rear. And almost off the tire racks. That dip got us. Took off the spares and the racks and now carry my spares in the bed of my truck. Next trip was to Texas and one or two the fuel stops I made was glad the spares where in the truck. Had just bare minium clearence on rear bumber to get in and out of the fuel pumps. 327res has a 13 foot over hang from last axle. Big swing and big tail drag. Going to Texas for good this next trip.
chuckretnav is offline   Reply With Quote
Old 05-29-2012, 07:02 AM   #19
wire1946
Junior Member
 
Join Date: Mar 2012
Location: Milford,DE
Posts: 6
Thumbs down res327

I have the same problem with my 2011 the 4x4 bumper riped away from the welded breackets. and could not get my swear hose out.,what a mess .rv dealer is going back to keystone .to see if they will fix it.hope you have better luck then i do
wire1946 is offline   Reply With Quote
Old 07-25-2012, 03:18 AM   #20
wire1946
Junior Member
 
Join Date: Mar 2012
Location: Milford,DE
Posts: 6
Smile

I had the same proble with my 327 .the side that held the spare tire bent and ripes the square tube.and the braket that held it to the frame snaped off.went back to keystone .and they did fix it.rv was 2 yrs old at the time.
wire1946 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by the Keystone RV Company or any of its affiliates in any way. Keystone RV® is a registered trademark of the Keystone RV Company.


All times are GMT -8. The time now is 02:38 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.