Raptor Wired for Solar but where do the wires go
My 2019 Keystone Raptor 354 was prewired for solar. There is a Go Power cable entry plate with MC4 connectors on the roof. And there was a Go Power "Wired for Solar" sticker on the hallway wall that appeared to be a template to cutout to access the wires from the roof to the charge controller. But when I cut into the wall, I found many wires there. There are 7 green-white pairs, a couple coaxial cables, two pair of red-black wires, and a couple 110V wires.
I'm guessing one of the red-black pairs are for solar power use. But how can I determine which red-black pair is the right pair? And where does it go?
|