|
|
09-26-2018, 08:47 AM
|
#1
|
Member
Join Date: Mar 2018
Location: Keizer, Or
Posts: 59
|
Television sound through speakers
This may not apply to everyone's system but i found on our trailer if you take the red and white rca's that come up from the audio unit if equipped with a DVD player. Swap the red and white to the audio out on your Tely and turn the radio source to AUX-1 and it should in theory play your tely sound through the speakers in your trailer. I did this on our 2013 cougar and also my parents 2018 cougar. hope this helps anyone who cares to have surround sound in their camper..
Cheer's
__________________
Russell & Andrea
2013 Keystone Cougar 279rkswe
2003 Quad Cab Dodge ram 2500 2wd
Edge cs2 Programmer w/ egt
4" Turbo back exhaust
|
|
|
09-26-2018, 09:02 PM
|
#2
|
Senior Member
Join Date: Aug 2018
Location: prophetstown
Posts: 318
|
Was wondering how to do that
|
|
|
09-27-2018, 05:10 AM
|
#3
|
Site Team
Join Date: Oct 2011
Location: Joppa, MD
Posts: 11,762
|
Thanks Rosco. It's not surround sound it's stereo but typically sounds better than the wimpy television's amp & speakers.
__________________
Marshall
2012 Laredo 303 TG
2010 F250 LT Super Cab, long bed, 4X4, 6.4 Turbo Diesel
|
|
|
09-27-2018, 06:00 AM
|
#4
|
Senior Member
Join Date: Oct 2017
Location: Rochester, NY
Posts: 590
|
Quote:
Originally Posted by Roscoe
This may not apply to everyone's system but i found on our trailer if you take the red and white rca's that come up from the audio unit if equipped with a DVD player. Swap the red and white to the audio out on your Tely and turn the radio source to AUX-1 and it should in theory play your tely sound through the speakers in your trailer. I did this on our 2013 cougar and also my parents 2018 cougar. hope this helps anyone who cares to have surround sound in their camper..
|
Wouldn't you also need to change the same red/white cables from output to input on the back of your DVD/Radio?
__________________
Mike & Barb
2015 Keystone Bullet Premier 26RBPR
2018 Cedar Creek 36CK2
2017 Chevy Silverado LT Z71
|
|
|
09-27-2018, 09:41 AM
|
#5
|
Member
Join Date: Mar 2018
Location: Keizer, Or
Posts: 59
|
negative. just the ones on the tv..
__________________
Russell & Andrea
2013 Keystone Cougar 279rkswe
2003 Quad Cab Dodge ram 2500 2wd
Edge cs2 Programmer w/ egt
4" Turbo back exhaust
|
|
|
10-22-2018, 12:23 PM
|
#6
|
Junior Member
Join Date: Oct 2018
Location: Tulsa
Posts: 1
|
Quote:
Originally Posted by WNY Bullet
Wouldn't you also need to change the same red/white cables from output to input on the back of your DVD/Radio?
|
Thats what I had to do. I have Furrion 3300 if I am remembering the model number correctly.
I just left the rca cable that was already there in place and added another one so I could connect my tv output to the stereos input.
The existing rca was connected to the stereo units output for sending dvd sound to your tv.
We just stream stuff thru our firestick using a wifi hotspot and wanted the sound to come thru the stereo speakers since our tv speakers are worthless.
|
|
|
09-27-2018, 09:54 AM
|
#7
|
Junior Member
Join Date: Aug 2018
Location: Kellyville
Posts: 7
|
Quote:
Originally Posted by Roscoe
This may not apply to everyone's system but i found on our trailer if you take the red and white rca's that come up from the audio unit if equipped with a DVD player. Swap the red and white to the audio out on your Tely and turn the radio source to AUX-1 and it should in theory play your tely sound through the speakers in your trailer. I did this on our 2013 cougar and also my parents 2018 cougar. hope this helps anyone who cares to have surround sound in their camper..
Cheer's
|
Hmm.. seems odd as our 2014 was already set up for this. 31RBDS 6 speakers..(ABC speaker selector) 2 are located under awning. Just wonder now is this equipment factory installed or dealer prepped at site?
|
|
|
09-28-2018, 03:53 AM
|
#8
|
Senior Member
Join Date: Jan 2011
Location: Arvada, CO
Posts: 709
|
Quote:
Originally Posted by Mrmiata
Hmm.. seems odd as our 2014 was already set up for this. 31RBDS 6 speakers..(ABC speaker selector) 2 are located under awning. Just wonder now is this equipment factory installed or dealer prepped at site?
|
Our 2010 is configured to do this as well. ???
__________________
2010 Laredo 245RL
2007 Dodge Ram 2500 CTD 4x4
Andersen Ultimate Gooseneck mount
|
|
|
09-27-2018, 12:51 PM
|
#9
|
Junior Member
Join Date: Mar 2015
Location: Crawfordville
Posts: 14
|
I use an audio cable, plug into the aux output on dvd player , plug the other end into theTV headset input.
|
|
|
09-27-2018, 03:31 PM
|
#10
|
Member
Join Date: Mar 2018
Location: Keizer, Or
Posts: 59
|
i think there are several different ways to accomplish the same goal. this just happened to work and thought i would share what i found.
__________________
Russell & Andrea
2013 Keystone Cougar 279rkswe
2003 Quad Cab Dodge ram 2500 2wd
Edge cs2 Programmer w/ egt
4" Turbo back exhaust
|
|
|
09-28-2018, 02:25 AM
|
#11
|
Site Team | Emeritus
Join Date: Dec 2015
Location: Kansas City
Posts: 3,878
|
Quote:
Originally Posted by Travelingcircus
I use an audio cable, plug into the aux output on dvd player , plug the other end into theTV headset input.
|
I did exactly this and no bueno. Not sure why it didn't work. Any thoughts?
__________________
Chip Bruce, RPh
Kansas City, MO
2016 Impact 312
2017 Silverado 3500HD SRW
|
|
|
09-28-2018, 10:27 AM
|
#12
|
Junior Member
Join Date: Aug 2018
Location: Kellyville
Posts: 7
|
Quote:
Originally Posted by ctbruce
I did exactly this and no bueno. Not sure why it didn't work. Any thoughts?
|
That was actually listed backwards I do believe.. "TV Headphones" would be an out signal.. that would have to plug into an audio "input" to the dvd or receiver player.
|
|
|
09-28-2018, 05:19 PM
|
#13
|
Member
Join Date: Mar 2018
Location: Keizer, Or
Posts: 59
|
Maybe it depends on the brand of stereo. I have a jensen dvd unit. red and white rca's plugged into AUDIO out on the tv and the radio to AUX-1... i will take a picture and post it up later tonight or tomorrow depending on how many beers i have tonight
__________________
Russell & Andrea
2013 Keystone Cougar 279rkswe
2003 Quad Cab Dodge ram 2500 2wd
Edge cs2 Programmer w/ egt
4" Turbo back exhaust
|
|
|
09-28-2018, 05:34 PM
|
#14
|
Senior Member
Join Date: Aug 2018
Location: prophetstown
Posts: 318
|
Quote:
Originally Posted by Roscoe
Maybe it depends on the brand of stereo. I have a jensen dvd unit. red and white rca's plugged into AUDIO out on the tv and the radio to AUX-1... i will take a picture and post it up later tonight or tomorrow depending on how many beers i have tonight
|
I have a Jensen TV and Jensen radio and CD player. The are both connected with audio cables and have tried aux 1 ,2,, and 3 and nothing
|
|
|
10-05-2018, 06:42 AM
|
#15
|
Junior Member
Join Date: Mar 2013
Location: New Caney, TX
Posts: 9
|
Quote:
Originally Posted by Roscoe
Maybe it depends on the brand of stereo. I have a jensen dvd unit. red and white rca's plugged into AUDIO out on the tv and the radio to AUX-1... i will take a picture and post it up later tonight or tomorrow depending on how many beers i have tonight
|
So too many beers consumed = no picture?
|
|
|
09-29-2018, 02:07 AM
|
#16
|
Junior Member
Join Date: Mar 2015
Location: Crawfordville
Posts: 14
|
Quote:
Originally Posted by ctbruce
I did exactly this and no bueno. Not sure why it didn't work. Any thoughts?
|
2 possibilities, the Aux button on dvd player was not on.
My TV has two similar audio inputs, I used the one that with the headset icon.
Other than that, I have no idea why it wouldn't work.
|
|
|
10-04-2018, 08:40 AM
|
#17
|
Member
Join Date: Jun 2013
Location: Winnipeg
Posts: 32
|
I’ve been doing something like this now for about 10 years. I own a 2008 Keystone Cougar Model 291 RLS. I have TWO HD TVs installed in it – a 37 inch one installed in the TV alcove provided and a second 24 inch model mounted to a non-OEM installed solid oak cabinet that I built and mounted above the emergency escape window in the bedroom. I have/take with me in the trailer a Bell ExpressVu satellite receiver with an auxiliary hard drive so that I can use the receivers PVR functionality. The receiver and hard drive are on the cabinet shelf below the TV. I ‘drive’ the 37 inch TV using Component Video Cables and I also ‘drive’ the second 24 inch HDTV in the bedroom using a long (15 feet I think) HDMI cable. (I did experiment trying to use an HDMI splitter and use an HDMI cable for each TV but – too many problems – I won’t go into it here, and I’m not saying it could be made to work, but you can run into a little really weird glitches trying to make it work). I use a very simple Infrared Remote Control extender with the sensor and mounted/positioned above the bathroom medicine cabinet and just place the transmitter and in front of and slightly to the side of the Infrared sensor on the receiver. I also did the ‘pipe the 37 inch TV sound through my interior speakers’ using the AUX IN connector on the trailers Jensen home theatre system. (I can’t recall where I took the sound from on the back of the TV – it might’ve been the audio out terminals or maybe I used the microphone terminals. Just can’t recall and I just had a look (or more precisely, try to take a look) but I can’t manage to see behind the TV exactly what I used). All in all – how does it work? GREAT! The satellite-TV signals are received by a Winegard ‘carry out’ automatic signal seeking and locking dish (domed) mounted on the roof of my trailer. Again, works great. I power the Winegard straight off the trailers 12 V DC system, taking power from one of the ceiling lights in the bedroom. I just drilled and mounted a nice ‘pushbutton’ switch to enable me to turn the power to the Winegard on and off and I added a small green LED that I can see easily from the living room of the trailer so that I can know whether it is on or not. Very convenient. Once the trailer is set up in levels, assuming you don’t have a signal eating tree or something in the way, just push the power button to power up the Winegard and within about two and a have to three minutes – voilà – you have TV. The only limitation of this set up is that while you can and I have using a scheme like this to drive to TVs, you are limited to watching the same program on both TVs. (Or, perhaps more precisely, I THINK that if you wanted to install some additional SUITABLE satellite-TV switches, you could use a second receiver to watch another program BUT it would still have to be on a transponder off the same satellite as, Bell and most other satellite providers frequently use more than one satellite located at a different point in the sky to provide at least some of their channels with a single LNB in the Winegard, it can’t pick up signals from more than one physical satellite at a time. Nevertheless and all in all, it is perfect for me and has worked flawlessly for probably close to 10 years now. Sorry to go on so long but I was ‘in the mood’ and I just thought somebody might find my set up interesting.
|
|
|
09-13-2022, 12:25 AM
|
#18
|
Senior Member
Join Date: Feb 2019
Location: Wickenburg
Posts: 3,314
|
Quote:
Originally Posted by ctbruce
I did exactly this and no bueno. Not sure why it didn't work. Any thoughts?
|
Sounds like OP is lucky enough to have a receiver whose audio out ports also just happen to work as audio in. You sure can't depend on that.
You should have an RCA cable from receiver out to TV in, for DVDs, and another cable from TV out to receiver in, to route TV sound to the cabin speakers. OP's sound quality might even improve if he did that.
|
|
|
09-28-2018, 05:19 PM
|
#19
|
Senior Member
Join Date: Sep 2018
Location: Fairfax
Posts: 507
|
I also was looking to achieve this goal of using the better and built-in speakers when watching TV. I achieved this a different way though. My Hideout had a Furrion DV3100 installed. I went ahead and bought and upgraded to a DV3300 unit with HDMI instead. The Summit TV that came in our trailer has an HDMI interface with ARC (Audio Return Channel). The DV3300 also supports this on its HDMI port. What this enables is that the TV can output the sound over the HDMI back to the Furrion unit which then plays sound over the speakers. This will only work with input from other HDMI interfaces on TV (such as a laptop, media streaming box, or Blu-ray player) but that works fine for my purposes.
Hopefully this helps some!
|
|
|
03-02-2019, 06:52 PM
|
#20
|
Junior Member
Join Date: Mar 2019
Location: Reno
Posts: 14
|
Quote:
Originally Posted by cookinwitdiesel
I also was looking to achieve this goal of using the better and built-in speakers when watching TV. I achieved this a different way though. My Hideout had a Furrion DV3100 installed. I went ahead and bought and upgraded to a DV3300 unit with HDMI instead. The Summit TV that came in our trailer has an HDMI interface with ARC (Audio Return Channel). The DV3300 also supports this on its HDMI port. What this enables is that the TV can output the sound over the HDMI back to the Furrion unit which then plays sound over the speakers. This will only work with input from other HDMI interfaces on TV (such as a laptop, media streaming box, or Blu-ray player) but that works fine for my purposes.
Hopefully this helps some!
|
So what is the wire configuration? I have the furrion HDMI cable connected to HDMI on the summit TV. I have the direct tv connected to the HDMI 2 on the Summit TV. I have the dv3300 set on ARC. But I can’t get any sound through the RV speakers. Can you advise as to your wire pattern? Thanks
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|