Fresh water tank crack repair

[Fishsizzle]

Originally Posted by Bnftravel

Well after several days of searching and looking for repair tips for a cracked fresh water tank at the drain hole area I finally fixed it.
We have a 2017 keystone Bullet crossfire 2070bh.
Last season we noticed the fresh water holding tank was leaking.
First I was going to buy a new fresh water holding tank and decided to check into repairs and found that a electric plastic welder would work for this project.
My neighbor mentioned that he had one so I gave it a try and it worked out great.
It not only heated the plastic and sealed with the plastic rods it actually stiff and the bottom of the drain area and made it more solid and we no longer have a crack project took me approximately one hour to do.
I used a Mini-Weld Model 7 Airless Plastic Welder model #URE5700HT
If I didn’t have one I would’ve went out and purchased it for around $170 it is well worth every penny it will repair almost any plastic there is cracks holes whatever you need to fix this thing seems to do a great job I’m very pleased with it.
Some may say repairing freshwater holding tank’s won’t work but from what I’ve seen and what this little machine can do I beg to differ. I put about 15 to 18 gallons of water in it after the project was repaired and I have not had a drop of water leak out at all today so far so good will let everybody know down the road how I made out.
From what I read on purchasing a new tank was the issue with taking the old one out because of the straps being screwed in from the top side and the amount of time and effort it would’ve been would’ve needed to replace the tank this repair was a much better solution.
Happy campers in Bardstown Kentucky

That’s really cool! Congrats

[gearhead]

Very well done.