Flush

[Gregory]

This morning when we got ready to leave our site I hooked up the hose to my flush inlet as I have done for 2 years.when I turned on the water I had instant leaking that appeared to be coming from up where the water lines go to shower.there are a red,blue and 2 white lines going up that way.once I turned off the flush line the water stopped. I’m trying to figure why and where the white lines would go in that direction. Any ideas thanks Greg

[JRTJH]

There's a current thread about the same topic right now.

I think all your answers are in that thread: https://www.keystoneforums.com/forum...ad.php?t=50674

If not, ask away....

[bobbecky]

First, it would really eliminate a lot of guessing if you would tell us what rig you have.
Our backflow/air gap valve is between our shower and the pantry cabinet and I was able to see it through where the pocket door is. Hopefully you can gain access to it by making a hole through a panel in your rig. The valve will be located about 6 inches or so above the rim of the toilet. The photo shows our valve. They used red PEX for the lines to the tank flush on our rig.

[Gregory]

Keystone cougar 25res