Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 

Go Back   Keystone RV Forums > Keystone Tech Forums > Tow Vehicles
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 12-06-2019, 03:48 AM   #1
Dan Lockwood
Senior Member
 
Join Date: Sep 2019
Location: O'Fallon
Posts: 209
Just An Observation On TV...

I know from what I've read, (and no, I've not weighed anything yet, but plan to do so my first major trip out fully loaded) that I'm probably slightly over my limits on my 2012 RAM 3500 dually 4x4 LB 6.7L.

My observation, my RAM is a '12, my Raptor is a '12 model that's titled as a '13 because if was built in June of '13, for the year I have the heaviest duty TV short of a 4500, which most people did not purchase.

So if Keystone was aiming at a market size of trucks with the Raptor 395LEV, it had to be a F-350 or a GM 3500 or a RAM 3500. As I said other than a 4500 series there were no larger towing capacity trucks.

I think I'm just second guessing my combination a bit. After reading all the posts here about under powered TV versus their 5er's, I was a bit concerned that I was way under what I really needed. Yes today I could buy a newer truck with greater towing limits, but hey, they're both '12s so I'm going to just be satisfied with knowing that in '12 my truck was one of the best suited for the Raptor.

Am I being paranoid about all this?

Sorry if this is a redundant post from someone else, don't know.

Thanks and have a Happy Holidays!
__________________
Dan
2012 Keystone Raptor 395LEV
2021 Ford F-350 King Ranch DRW 6.7 Diesel
'09 Harley CVO Road Glide
'76 Harley FLH Shovelhead
Dan Lockwood is offline   Reply With Quote
Old 12-06-2019, 04:23 AM   #2
Tbos
Senior Member
 
Join Date: Jul 2014
Location: Solomons
Posts: 3,874
Dan,
Hope you will be pleasantly surprised when you weigh everything. Once you do you may be able to change the way you load things to help. I’m already looking at what I can move into the bed of the truck instead of the cargo bays on my Alpine. Since I’ve added my washer and dryer and 2 additional bikes I’m probably getting close on mine. My biggest issue is how much does all the “just in case stuff” weigh. I need to figure out exactly what I really need to carry. As you stated you bought one of the best trucks available at the time you bought the 5er. Not much else you can do except weigh it all, purge, and rearrange as needed. Good luck.
__________________
Tom
2019 Alpine 3651RL
2016 F350 CC DRW
Tbos is offline   Reply With Quote
Old 12-06-2019, 05:29 AM   #3
rhagfo
Senior Member
 
rhagfo's Avatar
 
Join Date: Apr 2012
Location: Portland, OR
Posts: 4,176
Dan, 2012 TV and TH, this is 2019 did you just purchase both? Did you have the TV and just purchase the TH?
The only number you might exceed is GVWR, in 2012 the Ram 3500 DRW was still rated at 12,300# GVWR, the same as my DD 2004 Ram 3500 DRW.
I have not looked at DD rear axle rating but I know it is likely near the 9,750# of out 2016 Ram 3500.
Your dry pin on the TH is 23% likely not to get any larger especially with the Harley's in the rear.
It will be interesting to see your weight as you head out.

2012 Keystone Raptor 395LEV Specifications
Length 42' 5"
Dry Weight 14,610#
Payload Capacity 3,390#
GVWR 18,000#
Hitch Weight (Dry) 3,560#
__________________
Russ & Paula and Belle the Beagle.
2016 Ram Laramie 3500 DRW 14,000# GVWR (New TV)
2005 Copper Canyon 293 FWSLS 32’ GVWR 12,360
Visit and enjoy Oregon State Parks
rhagfo is offline   Reply With Quote
Old 12-06-2019, 06:12 AM   #4
Dan Lockwood
Senior Member
 
Join Date: Sep 2019
Location: O'Fallon
Posts: 209
Quote:
Originally Posted by rhagfo View Post
Dan, 2012 TV and TH, this is 2019 did you just purchase both? Did you have the TV and just purchase the TH?
The only number you might exceed is GVWR, in 2012 the Ram 3500 DRW was still rated at 12,300# GVWR, the same as my DD 2004 Ram 3500 DRW.
I have not looked at DD rear axle rating but I know it is likely near the 9,750# of out 2016 Ram 3500.
Your dry pin on the TH is 23% likely not to get any larger especially with the Harley's in the rear.
It will be interesting to see your weight as you head out.

2012 Keystone Raptor 395LEV Specifications
Length 42' 5"
Dry Weight 14,610#
Payload Capacity 3,390#
GVWR 18,000#
Hitch Weight (Dry) 3,560#
They are both new to the wife and I. Purchased the truck in July and the 5er in August. The only towing so far has been from the Des Moines IA area to the greater St. Louis MO area. I've had it to the storage lot a couple of times and right now it's in my house driveway. I hope to have it loaded with my two Harleys and our new washer/dryer combo unit tomorrow and back out to the storage lot.

I've added Air Lift 5000's to help with a bit of sag, but that's it. Without the bags it doesn't seem to drop that much when hooked up, but thought the bags would also help with ride comfort when towing.

It is what it is, so nothing will change there. I'm just trying to get a grip that I didn't do something stupid with a much too heavy TH. But as the "observation" suggested, both the TH and TV were the best match in '12.

Tom, thanks.
__________________
Dan
2012 Keystone Raptor 395LEV
2021 Ford F-350 King Ranch DRW 6.7 Diesel
'09 Harley CVO Road Glide
'76 Harley FLH Shovelhead
Dan Lockwood is offline   Reply With Quote
Old 12-06-2019, 08:02 AM   #5
+Ruff Rider
Gone Traveling
 
Join Date: Apr 2015
Location: United States
Posts: 171
I do a lot of traveling . The first trip I found that i had to much stuff. So when i got home i did a clean out and removed what i didn't use on the trip. I did however need to buy some tools along the way for repairs to the RV. If you are going on a long trip think long and hard before you add a item that you may not even bring out. Next trip the chairs are not going. I have only used them once in 3 trips. Remember if you need something you didn't bring there is always some place you can buy it along the way.
+Ruff Rider is offline   Reply With Quote
Old 12-06-2019, 09:28 AM   #6
flybouy
Site Team
 
Join Date: Oct 2011
Location: Joppa, MD
Posts: 11,714
Dan not trying to be cynical but without having a cat scale weight and the information from your door sticker on your truck you may as well stop at a Carnival and ask the guy that's "guessing your weight for a cupie doll".

No one here can with any certainty know what you have added into your truck or trailer nor know what the actual carrying capacity of your truck is. Published empty weights are useless and "assuming" how much weight you have is well, you know what they say about what "assume" means. If you think "that I'm probably slightly over my limits" without visiting a scale then I think your visit to the scales will be an eye opening experience.
__________________
Marshall
2012 Laredo 303 TG
2010 F250 LT Super Cab, long bed, 4X4, 6.4 Turbo Diesel
flybouy is online now   Reply With Quote
Old 12-06-2019, 10:00 AM   #7
sourdough
Site Team
 
Join Date: Feb 2014
Location: W. Texas
Posts: 17,598
"It is what it is, so nothing will change there. I'm just trying to get a grip that I didn't do something stupid with a much too heavy TH. But as the "observation" suggested, both the TH and TV were the best match in '12."

"So if Keystone was aiming at a market size of trucks with the Raptor 395LEV, it had to be a F-350 or a GM 3500 or a RAM 3500. As I said other than a 4500 series there were no larger towing capacity trucks."

"I think I'm just second guessing my combination a bit. After reading all the posts here about under powered TV versus their 5er's, I was a bit concerned that I was way under what I really needed. Yes today I could buy a newer truck with greater towing limits, but hey, they're both '12s so I'm going to just be satisfied with knowing that in '12 my truck was one of the best suited for the Raptor."



Dan, don't want to be a downer but I don't think I understand the above statements.

Your comment that "it is what it is" seems to allude to the fact that you will accept whatever overload you may have because, as the rest of your comments indicate, in your opinion, Keystone built your unit to fit a 350/3500 size truck although knowing that 450/4500s exist. What is the rationale behind that thought?

As in everything else, and as you know, the weight limitations are really there and the proposed weight of the RV is really there. The two shall be revealed at the scale. If you are severely overloaded you can do a few things; get a bigger truck, get a smaller trailer, or if possible, remove items from the truck/trailer; the same solutions every overloaded RV tower has. Where the notion that Keystone built your trailer to fit a 1 ton no matter the weight doesn't make sense to me. Just because they are what you have doesn't mean they HAVE to be compatible.

Again, not trying to rain on your parade but be realistic. Hopefully you find that you aren't overweight or that you can remove enough stuff to fit the weights but at the end of the day the weights stated for the vehicle, and the weights for the trailer from a scale, will tell the story. Good luck.
__________________
Danny and Susan, wife of 56 years
2019 Ram 3500 Laramie CC SWB SB 6.4 4x4 4.10
2020 Montana High Country 331RL
sourdough is offline   Reply With Quote
Old 12-06-2019, 10:32 AM   #8
Ken / Claudia
Senior Member
 
Join Date: Nov 2012
Location: Fruitland
Posts: 3,357
I agree with Danny on the statements about made for a DRW 1 ton. And add, I would talk with an engineer/designer of the unit at Keystone if that is even possible before thinking it was made for a 1 ton TV. Here out west I do see DRW 1 tons pulling big 5ers and clearly some are overloaded. There are also many and I mean many 450s/550s and even larger pulling big 5ers. I have only walked through the largest 5ers at RV shows to just look and never tried to match any to a TV. I think the same applies here as in any other TV/RV combo. Match up the weights the best you can by whats listed on the truck and RV to have the right combo and still go weight and really find out where your at.
__________________
2013 24RKSWE (27ft TT) Cougar 1/2 ton series SOLD 10-2021
2013 Ford F350 4x4 CC 6.7 engine, 8 ft bed, 3.55 rear end, lariat package
Retired from Oregon State Police in 2011 than worked another 9.5 years as a small town traffic cop:
As of 05-2020, I am all done with 39 years total police work. No more uniforms for me.
Ken / Claudia is offline   Reply With Quote
Old 12-10-2019, 09:25 PM   #9
rhagfo
Senior Member
 
rhagfo's Avatar
 
Join Date: Apr 2012
Location: Portland, OR
Posts: 4,176
So here is my read as being a past bad boy on this forum.
2012 Ram 3500 DRW has a 12,300# GVWR our 2016 Ram 3500 DRW has a 14,000# GVWR. So there is a 1,700# difference in GVWR, our yellow sticker payload is 5,411# that less 1,700# = 3,711# of payload +/-. Now we both have the same size and capacity tires 235/70-17E's. Our 2016 is a Laramie, not sure of the trim level of your 2012 if less than a Laramie then a few more pounds of payload.
Looking forward to your scale weights, as I stated in my first post, you will likely be over your GVWR, with W/D as much as 500# or so. Well under tire and axle ratings, at that point it is your decision to tow over GVWR.

PS: You missed the 14,000# GVWR by one model year. The 2013 Ram's took a giant leap in GVWR, the 3500 DRW went from 12,300# to 14,000# mostly due to a stronger frame. Although the 3500 frame on my DD's 2004 3500 DRW is fully boxed so is yours.
__________________
Russ & Paula and Belle the Beagle.
2016 Ram Laramie 3500 DRW 14,000# GVWR (New TV)
2005 Copper Canyon 293 FWSLS 32’ GVWR 12,360
Visit and enjoy Oregon State Parks
rhagfo is offline   Reply With Quote
Old 12-11-2019, 05:45 AM   #10
Dan Lockwood
Senior Member
 
Join Date: Sep 2019
Location: O'Fallon
Posts: 209
Hey everyone, thanks for the insight and thoughts.

I do have a Laramie equipped RAM.

Below are my door jam stickers.

I know about the upgrade in the '13 RAM, but I did get a great deal on this one and it's the last year pre-DEF. This did sound good to me.

When I scale my rig as loaded, I'll probably use the CAT scales along the road at a truck stop.

Not sure how they work. Do you pay for one weighing for the total overall TV a TH and then re-pay for each additional weighing?

I know I will need to have multiple weights. What exactly do I need? As long as the scales are, I can't get just a rear wheel weight without either the total truck, or if I pull up further I get the TH along with the rear axle of the TV.

Is there some chart that is best to follow?

Thanks and have a very Happy Holiday Season!





__________________
Dan
2012 Keystone Raptor 395LEV
2021 Ford F-350 King Ranch DRW 6.7 Diesel
'09 Harley CVO Road Glide
'76 Harley FLH Shovelhead
Dan Lockwood is offline   Reply With Quote
Old 12-11-2019, 06:02 AM   #11
rhagfo
Senior Member
 
rhagfo's Avatar
 
Join Date: Apr 2012
Location: Portland, OR
Posts: 4,176
Quote:
Originally Posted by Dan Lockwood View Post
Hey everyone, thanks for the insight and thoughts.

I do have a Laramie equipped RAM.

Below are my door jam stickers.

I know about the upgrade in the '13 RAM, but I did get a great deal on this one and it's the last year pre-DEF. This did sound good to me.

When I scale my rig as loaded, I'll probably use the CAT scales along the road at a truck stop.

Not sure how they work. Do you pay for one weighing for the total overall TV a TH and then re-pay for each additional weighing?

I know I will need to have multiple weights. What exactly do I need? As long as the scales are, I can't get just a rear wheel weight without either the total truck, or if I pull up further I get the TH along with the rear axle of the TV.

Is there some chart that is best to follow?

Thanks and have a very Happy Holiday Season!





Well you are far better off than I thought, 4,300# payload (Darn my Ram is fat! only 5,411# payload).
Depending how heavy you load your truck you could come in under all numbers, or at least only be over GVWR by a couple hundred pounds.

I also like the last label with the light load tire pressures, I would keep the fronts at 70 to 80 psi, but unloaded the rears at 40 psi will make for a softer ride.
__________________
Russ & Paula and Belle the Beagle.
2016 Ram Laramie 3500 DRW 14,000# GVWR (New TV)
2005 Copper Canyon 293 FWSLS 32’ GVWR 12,360
Visit and enjoy Oregon State Parks
rhagfo is offline   Reply With Quote
Old 12-11-2019, 06:39 AM   #12
flybouy
Site Team
 
Join Date: Oct 2011
Location: Joppa, MD
Posts: 11,714
Cat Scale

Go to https://catscale.com/ for all the info you need on weighing your rig.
__________________
Marshall
2012 Laredo 303 TG
2010 F250 LT Super Cab, long bed, 4X4, 6.4 Turbo Diesel
flybouy is online now   Reply With Quote
Old 12-11-2019, 11:43 AM   #13
Dan Lockwood
Senior Member
 
Join Date: Sep 2019
Location: O'Fallon
Posts: 209
If I understand this correctly, the CAT Scales will have three load cells and I should be able to align my rig like this.

I'm guessing then that I will have three individual weights and one combined weight, correct?

Thanks again for helping out this rookie!
Attached Thumbnails
Click image for larger version

Name:	CAT Scales 5er Weigh In.JPG
Views:	114
Size:	22.6 KB
ID:	24592  
__________________
Dan
2012 Keystone Raptor 395LEV
2021 Ford F-350 King Ranch DRW 6.7 Diesel
'09 Harley CVO Road Glide
'76 Harley FLH Shovelhead
Dan Lockwood is offline   Reply With Quote
Old 12-11-2019, 12:25 PM   #14
Hellbilly13
Member
 
Join Date: Jul 2019
Location: Reno
Posts: 30
I just weighed at the CAT scale for the first time. Yes, you will pull up like in the pic and that will give you the 3 weights and an overall. Then you unhook and reweigh the TV. That will give you trailer weight when you subtract it from the overall weight.

It was about $14 for the first weigh and $3 for the second. I can't remember exactly.
__________________
Bill
2018 Montana 3790RD
2017 Ram 3500 Laramie DRW
Hellbilly13 is offline   Reply With Quote
Old 12-11-2019, 09:05 PM   #15
roadglide
Senior Member
 
roadglide's Avatar
 
Join Date: Apr 2015
Location: nm
Posts: 1,833
I'm wonder why you care about the trailer unhooked ? The 4 weights are steer axle,drive axle, trailer axles and gross weight. I have two 7K lb axles on my camper my cat scale weight at 11300 way under the 7 k axel and and 14 ply tires. You will add the steer and drive axles and that will give the GVW. My gross weight is way under the 25.000 GM has taged on the sticker. That's the way I read it . I'm right at the max with my rig and TV 11500 GVWR.
__________________
2018 1 ton 4x4 c.c standard bed GMC Denali
Anderson ultimate hitch
2015 311 Impact Fusion toy hauler
2018 Milwaukee 8 FLRTU roadglide glide ultra
2018 800 Z force spot BUGGY.
500 watts of solar enough power for boon docking.
roadglide is offline   Reply With Quote
Old 12-12-2019, 06:18 AM   #16
rhagfo
Senior Member
 
rhagfo's Avatar
 
Join Date: Apr 2012
Location: Portland, OR
Posts: 4,176
Quote:
Originally Posted by roadglide View Post
I'm wonder why you care about the trailer unhooked ? The 4 weights are steer axle,drive axle, trailer axles and gross weight. I have two 7K lb axles on my camper my cat scale weight at 11300 way under the 7 k axel and and 14 ply tires. You will add the steer and drive axles and that will give the GVW. My gross weight is way under the 25.000 GM has taged on the sticker. That's the way I read it . I'm right at the max with my rig and TV 11500 GVWR.
Two reasons;
To know how much pin on the trailer.
To Know how much the TV weighs without the trailer.
__________________
Russ & Paula and Belle the Beagle.
2016 Ram Laramie 3500 DRW 14,000# GVWR (New TV)
2005 Copper Canyon 293 FWSLS 32’ GVWR 12,360
Visit and enjoy Oregon State Parks
rhagfo is offline   Reply With Quote
Old 12-12-2019, 06:22 AM   #17
Bolo4u
Senior Member
 
Bolo4u's Avatar
 
Join Date: Sep 2016
Location: NorCal
Posts: 386
You're going to be tight on your weights, especially the heavier you load. Your pin weight for your TH GVWR would be roughly: 20% = 3600, 22% = 3960, 25% = 4500. A lot will be dependent on how heavy and how you distribute the weight when you load the TH. Not knowing the hitch setup in the TV, you can save weight by switching to a goosebox setup. That way you can save ~150 pounds bed weight. Yes you're adding weight to the TH, but it will likely be less than a hundred pounds once you take off the old pin box and put the goosebox on. Maybe getting a true cat scale weight with truck empty (but full of fuel with hitch and the DW/kids), then with the trailer hooked up. Good luck!
__________________
2019 Ram 3500 CTD, CC, Limited, DRW, 4x4, Aisin/4.10's
2017 Ram 3500 CTD CC DRW 4x4, 6.7/auto (Sold)
2016 Cougar 333MKS (sold to Camp Fire survivor)
Bolo4u is offline   Reply With Quote
Old 12-12-2019, 07:12 AM   #18
roadglide
Senior Member
 
roadglide's Avatar
 
Join Date: Apr 2015
Location: nm
Posts: 1,833
Quote:
Originally Posted by rhagfo View Post
Two reasons;
To know how much pin on the trailer.
To Know how much the TV weighs without the trailer.
This is the way it works I know what the yellow sticker says on my truck with both on the scale and I come in under the 7200 lbs on the yellow sticker I'm good to go with the pin weight. With 3000 lbs in the garage that pin weight will change on the tv.
__________________
2018 1 ton 4x4 c.c standard bed GMC Denali
Anderson ultimate hitch
2015 311 Impact Fusion toy hauler
2018 Milwaukee 8 FLRTU roadglide glide ultra
2018 800 Z force spot BUGGY.
500 watts of solar enough power for boon docking.
roadglide is offline   Reply With Quote
Old 12-12-2019, 08:11 AM   #19
flybouy
Site Team
 
Join Date: Oct 2011
Location: Joppa, MD
Posts: 11,714
Quote:
Originally Posted by roadglide View Post
This is the way it works I know what the yellow sticker says on my truck with both on the scale and I come in under the 7200 lbs on the yellow sticker I'm good to go with the pin weight. With 3000 lbs in the garage that pin weight will change on the tv.
Without the pin weight how do you know if the trailer load is distributed properly? If you're going to the scales what are you saving by not unhitching and a second weight? Four bucks and 20 minutes?

I must be missing something in this discussion, please enlighten me.

Thanks.
__________________
Marshall
2012 Laredo 303 TG
2010 F250 LT Super Cab, long bed, 4X4, 6.4 Turbo Diesel
flybouy is online now   Reply With Quote
Old 12-13-2019, 12:42 PM   #20
Dan Lockwood
Senior Member
 
Join Date: Sep 2019
Location: O'Fallon
Posts: 209
I don't have any true weights of the truck with the hitch, but with a full tank of fuel and two of us inside, the truck weighed 8,400# at the county recycle center when I unloaded.

I'm guessing that the weight as has been said of the B&W companion is about right, 75# for the upper and around 125# for the base. I had no issues with the top part lifting it off and I was more than able to pull the base straight up the 6" to get the lower pin our of the bed.

So without any other items I'm going to be close to 8,600# with full fuel on the RAM.

It's going to be late winter or early spring before I get a CAT scale weight slip, but I will do the full up and then unhooked for the truck alone, why not...

I do appreciate all the input and discussions. I'm learning a LOT on this forum, thanks and have a great weekend...
__________________
Dan
2012 Keystone Raptor 395LEV
2021 Ford F-350 King Ranch DRW 6.7 Diesel
'09 Harley CVO Road Glide
'76 Harley FLH Shovelhead
Dan Lockwood is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by the Keystone RV Company or any of its affiliates in any way. Keystone RV® is a registered trademark of the Keystone RV Company.


All times are GMT -8. The time now is 05:57 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.