|
02-10-2018, 05:26 PM
|
#1
|
Junior Member
Join Date: Feb 2018
Location: Evans City
Posts: 3
|
Slide problem
Have a 2014 raptor 300mp. The bedroom slide will drift out when it's in storage even on level ground. Anyone have this problem and know a fix?
|
|
|
02-11-2018, 05:59 AM
|
#2
|
Site Team | Emeritus
Join Date: Dec 2015
Location: Kansas City
Posts: 3,878
|
Did a forum search for "slide opens" and several threads come up. Here's one:
http://www.keystoneforums.com/forums...ad.php?t=27269
Sent from my SM-N950U using Tapatalk
__________________
Chip Bruce, RPh
Kansas City, MO
2016 Impact 312
2017 Silverado 3500HD SRW
|
|
|
02-11-2018, 06:09 AM
|
#3
|
Senior Member
Join Date: Aug 2017
Location: Lafayette
Posts: 1,068
|
Even after a valve is shut either manually or electrically there will still be pressure in the system that could cause the issue your having. Not sure how to relieve it, pressure should be on the pull in side of the cylinders if they are 2 way cylinders if I understand how the hyds are set up.
__________________
2015 Ram,3500,Dually,B&W,4.10s,Aisin,Limited,Silver
2018 Raptor,428SP w/full body paint
2012 Harley, Ultra Limited
|
|
|
02-11-2018, 06:22 AM
|
#4
|
Member
Join Date: Jan 2017
Location: Asheville
Posts: 56
|
We had a similar issue with our bedroom slide in our Avalanche, took it to CW twice, they could not find anything....they finally said have air in line....cure per them was cycle slide in and out multiple times....sounded like BS to me....however, it stopped doing it.....hmmmm
|
|
|
02-11-2018, 07:09 AM
|
#5
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,349
|
When you retract the slide do you hold the retract button for a couple of seconds after it finishes travel?
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
02-11-2018, 09:43 AM
|
#6
|
Senior Member
Join Date: Mar 2014
Location: Mountain Home, Idaho
Posts: 3,015
|
This will work if you take your time. Sounds like air in the system.
https://www.lci1.com/images/support/lipsheet/0183.pdf
Sent from my iPhone using Tapatalk
__________________
2007 GMC Classic club cab 4x4 Duramax LBZ
2014 Alpine 3010 RE. 34 foot fifth wheel
|
|
|
02-11-2018, 09:46 AM
|
#7
|
Senior Member
Join Date: Mar 2014
Location: Mountain Home, Idaho
Posts: 3,015
|
Slide problem
Also since you unit is a 2014 I would highly recommend you do this procedure. Even if you don’t have six point hydraulic level up. Exchanging some of that old original fluid with their recommended replacement fluid is a good sense practice.
https://www.lci1.com/images/support/lipsheet/0295.pdf
Sent from my iPhone using Tapatalk
__________________
2007 GMC Classic club cab 4x4 Duramax LBZ
2014 Alpine 3010 RE. 34 foot fifth wheel
|
|
|
02-11-2018, 12:33 PM
|
#8
|
Junior Member
Join Date: Feb 2018
Location: Evans City
Posts: 3
|
Yes I do hold the switch a little. And why is the fluid being recommend to be changed?
|
|
|
02-11-2018, 01:18 PM
|
#9
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,349
|
Fluid change is if you have “stiction”, normally noticed as jacks “popping”. I would perform the purge process and if the slide still creeps then I would be looking at the solenoids at the manifold by the pump.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|