|
09-08-2017, 10:41 AM
|
#1
|
Junior Member
Join Date: Jun 2017
Location: El cajon
Posts: 9
|
Leak at Connection for Black tank flush
at the point of connection with my hose and the black tank flush the value leaks . I've tried tightening the connection with a plumbers wrench without torquing to hard and still the same leak.
I've read a bit and it seems that the backflow prevention device could be the issue. I have easy access to mine, I believe its a black box with two tubes connected to it under the sink.
What I haven't been able to find is how to troubleshoot this issue. Any tips? do I just take the box off and turn it around?
Sorry for maybe a repeat question, I did my best to find a thread before asking but turn up empty.
Thanks in Advanced
|
|
|
09-08-2017, 11:05 AM
|
#2
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,353
|
If the anti siphon valve is leaking, the only repair is to replace it. You can get another cheesy plastic one or upgrade at your local hardware store. both fitting are 1/2" NPT. You can't just turn it around as the valve is one way.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
09-08-2017, 01:07 PM
|
#3
|
Junior Member
Join Date: Jun 2017
Location: El cajon
Posts: 9
|
Sorry to clarify its not the siphon valve that leaks. It's the connection at the port in the hook up bay. The leak happens between the exterior hose and the valve that you screw the hose into
Sent from my SM-G930T using Tapatalk
|
|
|
09-08-2017, 01:30 PM
|
#4
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,353
|
Make sure the washer is there. You can use any hose washer, I use the screen style like on the city water connection.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
09-08-2017, 03:08 PM
|
#5
|
Senior Member
Join Date: Sep 2011
Location: Northville NY in the Adirondacks
Posts: 2,128
|
Quote:
Originally Posted by Waterboy909
Sorry to clarify its not the siphon valve that leaks. It's the connection at the port in the hook up bay. The leak happens between the exterior hose and the valve that you screw the hose into
Sent from my SM-G930T using Tapatalk
|
OK, so it is a simple garden hose connection. If the leak is between the male and female connectors, it is identical to any garden hose hook up at your home. What would you do if you had a similar leak on the hose in your yard?
Well, the washer is first and obvious thing to check. If it's not doing its job, replace it. And let's be real here, this is not an RV problem or RV parts. You can use the same washers you buy at the local hardware store for your home garden hose.
If the washer is not the problem, then exactly where is the leak coming from? The female end on the trailer side is many times a single assembly that includes a check valve. On my Cougar, it's all plastic, and it is very possible that the plastic housing could crack and leak when pressure is applied. If you need to replace that assembly, that may require a trip to the RV parts counter. But, it is an easy replacement, at least on my Cougar. A couple of screws and a worm clamp.
If the leak is being caused by a deformed or damaged end on the hose, cut it off, get a replacement at the hardware store, brass or plastic is your choice, and install the new fitting.
__________________
'11 Cougar 326MKS loaded with mods
'12 Ford F250 SuperCab 6.7 PowerStroke Diesel
Amateur Radio: KD2IAT (146.520) GMRS: WQPG808 (462.675 TPL 141.3)
|
|
|
09-11-2017, 02:44 PM
|
#6
|
Senior Member
Join Date: Oct 2012
Location: Vermont
Posts: 367
|
Mine is leaking there also and know it is not a washer as I have never removed the hose. My bigger problem is the check valve under the sink as it now leaks whenever there is water pressure. Ordered a replacement from Walmart.
Back to the OP. It seems like the handle assembly for the tank washer leaks whenever it is turned on. I don't know how to get it out, but assume that it is easier to replace than to repair.
__________________
2015 Ford F-350 XLT Ruby Red 6.7L Powerstroke, 4x4, Short Bed, Andersen Ultimate Hitch
Cougar High Country 299RKS, Mor/Ryde pin box, 200w solar
|
|
|
09-11-2017, 07:16 PM
|
#7
|
Junior Member
Join Date: Jun 2017
Location: El cajon
Posts: 9
|
Hmm thanks for the insights, I'll try the washer see if that helps. I had heard that this can occur when the backflow preventer is installed incorrectly. Does anybody know how to tell if it is the problem?
Sent from my SM-G930T using Tapatalk
|
|
|
09-11-2017, 07:26 PM
|
#8
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,353
|
Hook up the water and turn it on. Then watch the tank gauges. If you can get to the valve, you can sometimes hear the water flowing.
It will only flow if the valve is installed correctly.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
09-12-2017, 01:41 AM
|
#9
|
Site Team | Emeritus
Join Date: Dec 2015
Location: Kansas City
Posts: 3,878
|
Mine drips too. Since it is only for a short while during dumping, I just don't put much emphasis on it. When I stop rinsing, it stops leaking. Close enough for government work.
Sent from my SAMSUNG-SM-N910A using Tapatalk
__________________
Chip Bruce, RPh
Kansas City, MO
2016 Impact 312
2017 Silverado 3500HD SRW
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|