|
03-28-2022, 10:47 AM
|
#1
|
Junior Member
Join Date: Mar 2022
Location: Dennison
Posts: 5
|
Slides not adjusted ?
We have 2021 Alpine 3790FK. Both the kitchen and bedroom slides will not go out. Both start but get crooked then stop. I did the reset on circuit board but no luck. Any help would be appreciated. Taking to repair shop on April 21. But like to get it fixed on my own.
|
|
|
03-28-2022, 01:26 PM
|
#2
|
Senior Member
Join Date: Mar 2019
Location: Milwaukie, OR
Posts: 1,398
|
Do you know what your slide mechanism is for each slide? They can be different.
Cable slide?
Schwintek Slide?
Rack and Pinion Slide?
Hydraulic?
Perhaps post a pic.
Welcome aboard! I'm sure you'll find some helpful advise here.
__________________
Jeff & Sandi (and Teddy - 7lb Schnorkie)
2018 Montana High Country 305RL
2015 RAM 3500 Crew Cab 4x4 DRW
Demco Recon Hitch on RAM Puck Ball
|
|
|
03-28-2022, 03:11 PM
|
#3
|
Junior Member
Join Date: Mar 2022
Location: Dennison
Posts: 5
|
Schwintec. I reset the controller
|
|
|
03-28-2022, 03:53 PM
|
#4
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,343
|
Quote:
Originally Posted by routie66
Schwintec. I reset the controller
|
How did you reset the controller?
Just asking to be sure you did the right thing.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
03-28-2022, 04:12 PM
|
#5
|
Junior Member
Join Date: Mar 2022
Location: Dennison
Posts: 5
|
Yes I did. Twice. Still no luck. They start to go in but get caddywampus then stop
|
|
|
03-28-2022, 04:51 PM
|
#6
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,343
|
What did you do exactly?
I’m only asking because there is a specific method to “re synch” the motors.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
03-28-2022, 05:02 PM
|
#7
|
Junior Member
Join Date: Mar 2022
Location: Dennison
Posts: 5
|
I followed youtube video and on panel ran slides out till it stopped then held in button for 3 seconds 7 times then tried to put it out again. Did not work. Then I found slide circuit board and press small button six times then on 7th lights flashed and I thought it reset. But it flashed 9 times. Tried to open slides again. No luck. Please help.
|
|
|
03-28-2022, 05:13 PM
|
#8
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,343
|
Pressing that button 7 times puts it in “over ride” doesn’t reset anything.
There are 2 LEDs in the slot on the controller. One will flash 1 or 2 times, the other will flash up to nine times. Post how many times each LED flashes.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
03-28-2022, 05:41 PM
|
#9
|
Junior Member
Join Date: Mar 2022
Location: Dennison
Posts: 5
|
So you count each one.
|
|
|
03-28-2022, 05:52 PM
|
#10
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,343
|
Count the green, it will flash 1 or 2
Then count the red, it will flash up to 9 times. Tell me what comes up.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
03-28-2022, 06:46 PM
|
#11
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,343
|
If you have 2 slides not working, you’ll need to find 2 separate controllers. The schwintek controller only operates 1 room.
I know it’s not what you wanted to hear, but let’s see if we can’t figure out the issue(s) and hopefully a solution.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
03-29-2022, 05:40 AM
|
#12
|
Senior Member
Join Date: Mar 2014
Location: Las Cruces
Posts: 4,665
|
It’s unfortunate that they’ve gone away from the hydraulic slides in the bedroom. I don’t know how they would be able to do it in the kitchen slide, but the older Alpines had all the hydraulics for the bedroom under the bed. It reduces unserved storage, but worth it IMO. Good luck with that Schwintek junk. I’m sure Chcuckster will get you through it.
__________________
Brent
2013 Alpine 3500RE
2019 Silverado 2500HD Duramax
U.S. Air Force Retired (25 yrs)
|
|
|
03-31-2022, 05:23 AM
|
#13
|
Senior Member
Join Date: Mar 2014
Location: Mountain Home, Idaho
Posts: 3,013
|
THis should help you resync the schwintek slides
https://youtu.be/lqsWi27CLiU
__________________
2007 GMC Classic club cab 4x4 Duramax LBZ
2014 Alpine 3010 RE. 34 foot fifth wheel
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|