Ok few questions

MBSKI · 02-18-2018, 06:49 AM

2017 springdale 240bhe
$18 K
Is that a good price
That's all in tax and all that
The only draw back is the awning arms are bent!!
Any thoughts
Thanks
John

Sent from my SM-G955U using Tapatalk

Tinner12002 · 02-18-2018, 07:08 AM

I'm looking at a new 2017 240BH for $18,500 and a new 2018 for $18,999. Not sure what the difference is between the BH and the BHE. A good place the check pricing is RVT.com, that's where I found these. So with that being said I'd say their asking price is a bit high for a used unit...like about $3-4K high in my opinion.

MBSKI · 02-18-2018, 07:15 AM

Quote:

Originally Posted by Tinner12002

I'm looking at a new 2017 240BH for $18,500 and a new 2018 for $18,999. Not sure what the difference is between the BH and the BHE. A good place the check pricing is RVT.com, that's where I found these. So with that being said I'd say their asking price is a bit high for a used unit...like about $3-4K high in my opinion.

18k is all in tax fees ect

Sent from my SM-G955U using Tapatalk

MBSKI · 02-18-2018, 07:15 AM

Quote:

Originally Posted by MBSKI

18k is all in tax fees ect

Sent from my SM-G955U using Tapatalk

240bhe
Arctic package
Outside kitchen

Sent from my SM-G955U using Tapatalk

Chris P · 02-18-2018, 07:10 AM

Is it slightly used? Private seller or dealer? Seams kinda high. Not sure where you are located but you would think this time of year you can get really good deals.

Sent from my SM-G955U using Tapatalk

MBSKI · 02-18-2018, 09:52 AM

Quote:

Originally Posted by Chris P

Is it slightly used? Private seller or dealer? Seams kinda high. Not sure where you are located but you would think this time of year you can get really good deals.

Sent from my SM-G955U using Tapatalk

Camping world california

Sent from my SM-G955U using Tapatalk

KSH · 02-18-2018, 09:44 AM

I got the same one new for 17k from my dealer. Not out the door. This was 2 years ago.

Sent from my SM-J727T using Tapatalk

busterbrown · 02-18-2018, 09:59 AM

Brand new...from a Michigan dealer I purchased my Bullet from:

https://lakeshore-rv.com/springdale-...240bh/l-14618/

MBSKI · 02-18-2018, 10:02 AM

Quote:

Originally Posted by busterbrown

Brand new...from a Michigan dealer I purchased my Bullet from:

https://lakeshore-rv.com/springdale-...240bh/l-14618/

Michigan
I have family there
Alpena

Yeah I think am going to back out at that price

Sent from my SM-G955U using Tapatalk

mjeronimo · 02-18-2018, 10:33 AM

I assume you are Vacaville California? I looked at lakeshore but the shipping was 3500 to Cali or the time and gas (probably get 10 mpg with 1/2 ton). And as been stated on this forum, buying from local dealer has its privileges.

MBSKI · 02-18-2018, 10:35 AM

Quote:

Originally Posted by mjeronimo

I assume you are Vacaville California? I looked at lakeshore but the shipping was 3500 to Cali or the time and gas (probably get 10 mpg with 1/2 ton). And as been stated on this forum, buying from local dealer has its privileges.

Yes

Sent from my SM-G955U using Tapatalk

MBSKI · 02-18-2018, 10:38 AM

Quote:

Originally Posted by mjeronimo

I assume you are Vacaville California? I looked at lakeshore but the shipping was 3500 to Cali or the time and gas (probably get 10 mpg with 1/2 ton). And as been stated on this forum, buying from local dealer has its privileges.

How did you figure out am in Vacaville
What is your take on this deal

Sent from my SM-G955U using Tapatalk

ctbruce · 02-18-2018, 11:37 AM

Quote:

Originally Posted by MBSKI

How did you figure out am in Vacaville
What is your take on this deal

Sent from my SM-G955U using Tapatalk

It says Vacaville, CA on your member profile. I usually look to see where peeps are from. It's a small world and I have several times ran across people who know people I know.

Sent from my SM-N950U using Tapatalk

travelin texans · 02-18-2018, 03:34 PM

If it's at a dealer the bent arms, possibly new awning, would be replaced, not straightened, on their dime if your paying new price for the rv. Maybe If the the price of of the arm replacement + THEIR labor rate cost deducted from the price I might consider it, then from there the haggling would start.
And it's a year old rv already. If it's been titled, it's a used trailer, whether they drove it off the dealers lot or not.

Chief Mole · 02-18-2018, 05:47 PM

Welcome from South Carolina.

MBSKI · 02-18-2018, 06:56 PM

Quote:

Originally Posted by travelin texans

If it's at a dealer the bent arms, possibly new awning, would be replaced, not straightened, on their dime if your paying new price for the rv. Maybe If the the price of of the arm replacement + THEIR labor rate cost deducted from the price I might consider it, then from there the haggling would start.
And it's a year old rv already. If it's been titled, it's a used trailer, whether they drove it off the dealers lot or not.

Yeah

Thanks for the info
I ended the deal

Sent from my SM-G955U using Tapatalk

fourfourto · 02-19-2018, 06:17 AM

The dealer bent my arm also when resetting spring ,they don't sell individual arms they replaced both sides complete assembly.

That was last year now I have problem with spring again the awning wont go in( got it in but had to manually twist it) ,there taking a look at it in the spring and most likely replace complete tube.

ctbruce · 02-18-2018, 07:49 PM

I'm sure that another better deal will come your way. Keep looking, that's half the fun.

Sent from my SM-N950U using Tapatalk

MBSKI · 02-18-2018, 07:58 PM

Quote:

Originally Posted by ctbruce

I'm sure that another better deal will come your way. Keep looking, that's half the fun.

Sent from my SM-N950U using Tapatalk

Already found it

Sent from my SM-G955U using Tapatalk

notanlines · 02-19-2018, 03:28 AM

C'mon, Ski, you allowed everyone to rain on your first parade, you need to give us a chance to cheer your next parade. What's the deal and what did you buy? (inquiring minds want to know)

You may also like: