Fireplace Glass removal

[JKS11]

I have a Montana, 3810, 2018. Have to get to back of fireplace to fix tv wiring problems. How do you remove the smoked glass front panel of the Titan Flame, WF-48S, unit? I pulled it everyway but afraid of bracking it. Anyone out there ever removed the glass?. Please help.

[yolo2rv]

you'll need to remove the whole unit in order to get to the wiring. behind the trim of the fireplace should be 4 screws holding the unit in place. Try pushing up on the trim, it should release it from the clips that hold it in place. This was how i removed mine.

[JKS11]

Originally Posted by yolo2rv

you'll need to remove the whole unit in order to get to the wiring. behind the trim of the fireplace should be 4 screws holding the unit in place. Try pushing up on the trim, it should release it from the clips that hold it in place. This was how i removed mine.

I tried that and it will not move. Did you get the front smoked glass removed? Can you tell me again how to remove the glass front. I don't want to break the glass.

[ctbruce]

Here's another thread from not long ago.
http://www.keystoneforums.com/forums...ad.php?t=31352

Sent from my SM-N950U using Tapatalk

[JKS11]

Thanks, I've seen this post. Looks like no-one knows how to remove the glass. The manual just says to lift glass up and out. Not working. Tried everything. Any body out there run into this before?

[jlonginav]

Hello,
I have a Cougar 367FLS. The glass on mine is help in place by two screws and each of the top corners. I remove those first and glass tilted away and I couldset glass aside. The fireplace unit has 6 screws ( 3 on each side) remove those and slide unit out.