The access to the manual crank for our slide (08 Cougar 5th wheel) is located underneath the unit. On ours, there is a "cutout" in the black coroplast which has a 3-sided "flap" or "door". This flap is situated on the passenger side about 18 inches in front our steps - in front of the wheel. It is pretty much in line with the leading edge of the slide and the front rack and pinion gear.
Open the flap and peek in. You should find the slide motor and one end of a hex shaft. Using a ratchet, your can move the slide in or out - very slowly mind you. The wire to the motor should be disconnected to prevent electrical damage to the motor.
__________________
2008 Cougar 5th Wheel 27RKS
2005 2500 GMC Duramax
|