I added one to the trail we had before this one but it was Forest River product. It wasn't that hard to do if you can drop the one end of the tank enought to drill the hole. I was able to get just enough clearance between the end of the tank and the frame to get a small drill and hole saw bit in there to cut the mounting hole. I would say the hole thing probably took about an hour to install. I put some silicone around the mounting hole just to make sure everthing was sealed up good and then let it dry for 24 hours before I used it. It worked great and we will never have another trailer without a tank flush. It makes life so much easier. Hope this helps.
__________________
Phil & Janine & Lady
2004.5 Chevy 2500HD Duramax LLY CC LB 4X4
2009 Keystone Sprinter 272RLS
|