Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 

Go Back   Keystone RV Forums > Keystone Tech Forums > Modifications and Upgrades
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 06-02-2016, 08:51 AM   #21
Desert185
Senior Member
 
Desert185's Avatar
 
Join Date: Jul 2014
Location: Nevada
Posts: 2,695
This should be a sticky.

When I did mine, I called MOR/ryde to comfirm the kit number I needed for my factory equipped CRE/3000 equalizer. The MOR/ryde kit was actually made by/with Dexter parts and is available online with a Google search.

Edit: Folks, do this ASAP when you get your trailer, new or used, and follow up with removing the China bombs and checking the wheel bearings, seals and brakes. The grief you save will be your own.
__________________
Desert185 🇺🇸 (Retired Chemtrail vendor)
-Ram 2500 QC, LB, 4x4, Cummins HO/exhaust brake, 6-speed stick.
-Andersen Ultimate 24K 5er Hitch.
-2014 Cougar 326SRX, Maxxis tires w/TPMS, wet bolts, two 6v batts.
-Four Wheel 8' Popup Camper.
Desert185 is offline   Reply With Quote
Old 06-02-2016, 02:47 PM   #22
bg71361
Senior Member
 
Join Date: Jun 2013
Location: Maryland
Posts: 164
Quote:
Originally Posted by Desert185 View Post
This should be a sticky.

When I did mine, I called MOR/ryde to comfirm the kit number I needed for my factory equipped CRE/3000 equalizer. The MOR/ryde kit was actually made by/with Dexter parts and is available online with a Google search.

Edit: Folks, do this ASAP when you get your trailer, new or used, and follow up with removing the China bombs and checking the wheel bearings, seals and brakes. The grief you save will be your own.
Which kit part number did they give you?
bg71361 is offline   Reply With Quote
Old 06-02-2016, 03:02 PM   #23
Desert185
Senior Member
 
Desert185's Avatar
 
Join Date: Jul 2014
Location: Nevada
Posts: 2,695
Quote:
Originally Posted by bg71361 View Post
Which kit part number did they give you?
It was a year ago, so that info is long gone. Sorry.

I recall I gave the trailer year/model, shackle length, 5200# axles and mentioned the CRE/3000 equalizer when I called MOR/ryde direct. He was pretty quick to give me the kit number, which at the time was $88 from Amazon. Probably one of the least expensive yet effective mods to date.
__________________
Desert185 🇺🇸 (Retired Chemtrail vendor)
-Ram 2500 QC, LB, 4x4, Cummins HO/exhaust brake, 6-speed stick.
-Andersen Ultimate 24K 5er Hitch.
-2014 Cougar 326SRX, Maxxis tires w/TPMS, wet bolts, two 6v batts.
-Four Wheel 8' Popup Camper.
Desert185 is offline   Reply With Quote
Old 06-02-2016, 03:08 PM   #24
Desert185
Senior Member
 
Desert185's Avatar
 
Join Date: Jul 2014
Location: Nevada
Posts: 2,695
Quote:
Originally Posted by Desert185 View Post
It was a year ago, so that info is long gone. Sorry.

I recall I gave the trailer year/model, shackle length, 5200# axles and mentioned the CRE/3000 equalizer when I called MOR/ryde direct. He was pretty quick to give me the kit number, which at the time was $88 from Amazon. Probably one of the least expensive yet effective mods to date.
Found the box in the shop. U012-016 is the kit number. Still $88 and change on Amazon.
__________________
Desert185 🇺🇸 (Retired Chemtrail vendor)
-Ram 2500 QC, LB, 4x4, Cummins HO/exhaust brake, 6-speed stick.
-Andersen Ultimate 24K 5er Hitch.
-2014 Cougar 326SRX, Maxxis tires w/TPMS, wet bolts, two 6v batts.
-Four Wheel 8' Popup Camper.
Desert185 is offline   Reply With Quote
Old 06-02-2016, 03:28 PM   #25
bg71361
Senior Member
 
Join Date: Jun 2013
Location: Maryland
Posts: 164
Quote:
Originally Posted by Desert185 View Post
Found the box in the shop. U012-016 is the kit number. Still $88 and change on Amazon.
..Thanks
bg71361 is offline   Reply With Quote
Old 06-02-2016, 06:02 PM   #26
Dave W
Senior Member
 
Join Date: May 2015
Location: Near Saratoga Springs,
Posts: 1,131
As I noted in Post 20, I have since done mine -- every original nylon bushing was worn through and at 12-15,000 miles. The MORryde CRE will already have the bronze bushings so you will have spares. I also added one inch longer 9/16" U-bolts plus a 1" block to level the 5er up while towing. A note about the original 1/2" U-bolts as supplied by Keystone, all nuts were looser then the correct torque value of 65 lb ft and spun off easily. Another note - the center shackles will probably reverse. I levered one pair back, the other will move into position when the trailer is returned to the ground. Good time to check and adjust the brakes and magnets plus clean and repack the wheel bearings.

While recently towing the 5er, I noticed less motion over bumps and some squeaks and rattles are now gone
Dave W is offline   Reply With Quote
Old 06-08-2016, 04:16 PM   #27
JimDogs
Member
 
Join Date: Jan 2015
Location: Santa Clara, CA
Posts: 47
This was such a great write-up with pictures that it motivated me to tackle the job on my 2015 Laredo 314RE. I used the Dexter kit from eTrailer that included the EZ Flex equalizer. I had used this part on my previous rig, 2007 Cougar TT, and I loved the way it pulled with the EZ Flex installed.

Now the real story here is that I am 57 Y/O and fat and I have torn the rotator cuffs in both shoulders, so my wrenching is limited. Still, following the write-up I was able to do the job in 4.5 hours for both sides. I used 2 floor jacks instead of the bottle jacks which made it easier to move the axles as needed.

Don't be afraid of this upgrade! It is simply replacing 10 bolts! I look forward to our first trip with this upgrade. Grand Tetons here we come!
JimDogs is offline   Reply With Quote
Old 06-08-2016, 04:25 PM   #28
gtsum2
Senior Member
 
Join Date: Feb 2014
Location: Virginia
Posts: 384
Good upgrade. Did mine last weekend. Aside from trying to remove a bronze bushing in the cre3000 (mistake) it went smoothly. Impact tools made it go quickly as did the 6 point level up


Sent from my iPhone using Tapatalk
__________________
2015 Fuzion 345 Chrome
2014 Ram 3500 Megacab CTD Laramie
gtsum2 is offline   Reply With Quote
Old 10-01-2017, 10:28 AM   #29
mfifield01
Senior Member
 
Join Date: Sep 2015
Location: Austin, TX
Posts: 834
Thanks for all of the tips. I went to Advance Auto and loaned a ball joint removal tool. That tool and a pneumatic impact wrench helped expedite things. It took me about 3 hours on the passenger side and 2 on the driver's side. The nylon bushings didn't look that bad. The trailer should have over 10,000 miles now with shipping from the factory (Truck Brake Controller indicates around 9,500). I feel that the bushing could have gone another 5-10,000 miles, but it's piece of mind for me. The squeaky suspension is gone now.
__________________
(SOLD) 2015 Keystone Passport 2810BH
2013 Ram 1500 Hemi 8-speed 3.92 Air Suspension
mfifield01 is offline   Reply With Quote
Old 10-01-2017, 02:04 PM   #30
Tinner12002
Senior Member
 
Tinner12002's Avatar
 
Join Date: Aug 2017
Location: Lafayette
Posts: 1,068
Quote:
Originally Posted by Dave W View Post
As I noted in Post 20, I have since done mine -- every original nylon bushing was worn through and at 12-15,000 miles. The MORryde CRE will already have the bronze bushings so you will have spares. I also added one inch longer 9/16" U-bolts plus a 1" block to level the 5er up while towing. A note about the original 1/2" U-bolts as supplied by Keystone, all nuts were looser then the correct torque value of 65 lb ft and spun off easily. Another note - the center shackles will probably reverse. I levered one pair back, the other will move into position when the trailer is returned to the ground. Good time to check and adjust the brakes and magnets plus clean and repack the wheel bearings.

While recently towing the 5er, I noticed less motion over bumps and some squeaks and rattles are now gone
I think you should have went up a size/diameter on your u-bolts...anytime you lengthen them it good practice to go up a size in diameter from 1/2" to 9/16".
__________________
2015 Ram,3500,Dually,B&W,4.10s,Aisin,Limited,Silver
2018 Raptor,428SP w/full body paint
2012 Harley, Ultra Limited
Tinner12002 is offline   Reply With Quote
Old 10-01-2017, 06:37 PM   #31
bdaniel
Senior Member
 
Join Date: Mar 2011
Location: NC
Posts: 183
Here is my experience:

http://www.bobbystuff.com/rv/185/morryde-wet-bolt-kit

Bobby
bdaniel is offline   Reply With Quote
Old 10-01-2017, 07:25 PM   #32
rhagfo
Senior Member
 
rhagfo's Avatar
 
Join Date: Apr 2012
Location: Portland, OR
Posts: 4,176
So I will that to make the bronze bushings easier to inst all into the springs and equalizer I bought 1# of dry ice, placed the bronze bushings in t paper bag with the dry ice and put in the freezer over night, this will shrink the bushings and will be easier to install.
__________________
Russ & Paula and Belle the Beagle.
2016 Ram Laramie 3500 DRW 14,000# GVWR (New TV)
2005 Copper Canyon 293 FWSLS 32’ GVWR 12,360
Visit and enjoy Oregon State Parks
rhagfo is offline   Reply With Quote
Old 10-01-2017, 07:35 PM   #33
chuckster57
Site Team
 
chuckster57's Avatar
 
Join Date: Jul 2014
Location: Modesto
Posts: 20,234
We haven't ever had to "shrink" the bushings to put them in.
__________________

2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.

Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
chuckster57 is offline   Reply With Quote
Old 10-01-2017, 08:30 PM   #34
rhagfo
Senior Member
 
rhagfo's Avatar
 
Join Date: Apr 2012
Location: Portland, OR
Posts: 4,176
Quote:
Originally Posted by chuckster57 View Post
We haven't ever had to "shrink" the bushings to put them in.
Well didn't say required, just makes the job easier.

I used a deep socket to recieve the old nylon bushing, and used a vice to use the new bronze to push out the old nylon. I like working smarter not harder, never liked beating into place.
__________________
Russ & Paula and Belle the Beagle.
2016 Ram Laramie 3500 DRW 14,000# GVWR (New TV)
2005 Copper Canyon 293 FWSLS 32’ GVWR 12,360
Visit and enjoy Oregon State Parks
rhagfo is offline   Reply With Quote
Old 10-02-2017, 05:50 AM   #35
mfifield01
Senior Member
 
Join Date: Sep 2015
Location: Austin, TX
Posts: 834
I used a standard screw driver to get the nylon bushings out. Then I used a combination of a rubber mallet and bench vice to get the bronze bushings in.
__________________
(SOLD) 2015 Keystone Passport 2810BH
2013 Ram 1500 Hemi 8-speed 3.92 Air Suspension
mfifield01 is offline   Reply With Quote
Old 10-02-2017, 06:26 AM   #36
NorskeBob
Senior Member
 
NorskeBob's Avatar
 
Join Date: Apr 2017
Location: Oswego
Posts: 604
Had the RV dealer install them on our last RV (Lippert kit) and was glad to see them already installed on our Avalanche.

Kit dwg. from lippert EQ-WB2
Attached Thumbnails
Click image for larger version

Name:	wet bolt.jpg
Views:	346
Size:	89.6 KB
ID:	14235  
Attached Files
File Type: pdf 157641.pdf (72.7 KB, 339 views)
__________________

RV - 2017 Avalanche 320RS
TV - 2011 Chevy Silverado 3500HD LTZ CCLB Duramax SRW 4X4
NorskeBob is offline   Reply With Quote
Old 10-05-2017, 02:55 PM   #37
ken56
Senior Member
 
Join Date: Aug 2017
Location: Dandridge TN
Posts: 260
This upgrade is a necessity in my opinion. I did the Dexter kit on my last trailer that I have since traded in so now I need to do it to the new rig. My old rig towed so much better with this wet bolt kit and new heavier shackles on it that the first test tow out I could not believe the improvement. This should be standard on new trailers today, there is no reason for the crappy nylon bushings. Cheaper.....for the manufacturer, I know.
ken56 is offline   Reply With Quote
Old 04-25-2018, 07:10 AM   #38
rdhouston
Member
 
rdhouston's Avatar
 
Join Date: Sep 2016
Location: Edmond, OK
Posts: 34
Installed the kit this week. Went pretty well. Big deadblow helped motivate things. Center bushings were worn through. All zerks were good. I have two 12 ton jackstands which were perfect as they are very tall.

TT is Bullet Premier 29RKPR with 15k miles on it.

Went into bearings for first time. Didn't pump EZ Lubes as it has been a couple years and did not trust seals. The bearings had a light wipe of grease on them. Ordered up all new bearings and seals so those go on this week too.

Headed to Branson on Sunday so that'll be the shakedown.
__________________
2017 Bullet Premier 29RKPR
2015 Ford F150 SuperCrew 4x4
rdhouston is offline   Reply With Quote
Old 04-28-2018, 12:09 PM   #39
rdhouston
Member
 
rdhouston's Avatar
 
Join Date: Sep 2016
Location: Edmond, OK
Posts: 34
Rear seals were leaking slightly so I'm glad I didn't pump up the EZ Lubes.
__________________
2017 Bullet Premier 29RKPR
2015 Ford F150 SuperCrew 4x4
rdhouston is offline   Reply With Quote
Old 04-29-2018, 12:23 PM   #40
Cqyqte
Member
 
Cqyqte's Avatar
 
Join Date: Oct 2016
Location: Tottenham, Ontario
Posts: 37
Canadian here with a Keystone Springdale by Summerland trailer gross weight 7500lbs and just approaching 15000 kms in our second year and I noticed some inside edge wear on the trailing wheels. Decided that the suspension must be loosening or binding a bit causing the wear. So I decided to order the Dexter wet bolt kit and replace the less than desirable OEM nylon bushing and bolts. All nylon sleeves were worn through and the bolts starting to show shiny spots. The job wasn't as difficult as thought, especially when performed in the same manner as "Slow" described. One word of caution to those ordering the Dexter 1 3/4" suspension kit, because the Correct Track system the wet bolts in the Dexter kit for the front and rear adjustable spring eyes are too short. So unless you ordered 4 longer wet bolts you will have to reuse the existing OEM bolts in the new bronze bushings. I will order 4 longer ones and swap them out before our next trip.
__________________


2014 Ram 1500 Laramie
2017 Keystone Springdale 2660RL
Cqyqte is offline   Reply With Quote
Reply

Tags
wet bolt

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by the Keystone RV Company or any of its affiliates in any way. Keystone RV® is a registered trademark of the Keystone RV Company.


All times are GMT -8. The time now is 03:19 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.