|
06-14-2019, 11:41 AM
|
#1
|
Member
Join Date: Mar 2017
Location: Newberg, OR
Posts: 88
|
Lippert GC 3.0 Remote LC358601
Hi All.
Just received my new replacement remote from eTrailers and getting ready to install it. (Yes... $235 stupid tax. Don't leave it on the Rail bed when hooking up. ) Have read three different sets of directions which all seem to show two steps. First configuring the remote and then synching it to the GC 3.0 controller. It seems that you can synch two remotes, and that you don't have to configure the second one, if I'm reading the instructions correctly.
My thought is that, if I want this remote to work the same way as the old one, and I technically have the first one already configured and synched (although it's unusable due to crushed screen) I should NOT configure the new one, but just synch it. Is that correct? If I did configure the new one before synching, will the GC 3.0 receiver synch to the new configuration, or cause problems because the two remotes are not configured the same? I will be throwing out the dead old one when the new one works.
Anyone got experience?
__________________
DocWMB
2017 Cougar 327RLK 5th Wheel
2020 Ram 3500 CrewCab LB Diesel with Andersen Ultimate 5th Wheel Hitch
Oregon
|
|
|
06-15-2019, 10:51 PM
|
#2
|
Member
Join Date: Mar 2017
Location: Newberg, OR
Posts: 88
|
Got it done.
Well, turns out the most difficult part the whole job was finding the receiver with the sync button It is a separate unit from the fuseboard/leveler hookup and was on the ceiling behind my water heater.) Had to reconfigure once to match the slides in the right spots, but it all works great now.
A new question came up. There is an app for my iPhone from Lippert called OneControl. Does anyone know if this works with the GC 3.0 and the the 358601 Remote?
__________________
DocWMB
2017 Cougar 327RLK 5th Wheel
2020 Ram 3500 CrewCab LB Diesel with Andersen Ultimate 5th Wheel Hitch
Oregon
|
|
|
06-16-2019, 02:50 AM
|
#3
|
Senior Member
Join Date: Oct 2016
Location: "Murvil, TN
Posts: 2,212
|
Quote:
Originally Posted by DocWMB
Well, turns out the most difficult part the whole job was finding the receiver with the sync button It is a separate unit from the fuseboard/leveler hookup and was on the ceiling behind my water heater.) Had to reconfigure once to match the slides in the right spots, but it all works great now.
A new question came up. There is an app for my iPhone from Lippert called OneControl. Does anyone know if this works with the GC 3.0 and the the 358601 Remote?
|
The One Control app works with the One Control system, which I don't think is on the Keystone products. I have a Grand Design Momentum and have the One Control and I indeed use that app on my phone for control of some of the functions.....lights, leveling, awning deployment, slides, etc.
Keystone's system is called iN Control and they do have an app also.....but, your trailer must have the iN Control automated system in place to be able to use it. It comes on many of the Keystone trailers, so if you have it, yes, you could use the phone app for control.....depending on what all Keystone wired in to be controlled by the system.
__________________
2016 F350 King Ranch Crew Cab Dually Diesel 4x4
2018 Grand Design Momentum 394M
2023 Suzuki GSX-S1000GT+
Excessive payload capacity is a wonderful thing
"If it ain't Fast....It ain't Fun"
|
|
|
06-16-2019, 03:56 AM
|
#4
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,341
|
We are a Grand Designs dealer and I don’t recall seeing GC 3.0 on any unit with one control, only the hydraulic “level up”.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
06-16-2019, 05:24 AM
|
#5
|
Senior Member
Join Date: Oct 2016
Location: "Murvil, TN
Posts: 2,212
|
Quote:
Originally Posted by chuckster57
We are a Grand Designs dealer and I don’t recall seeing GC 3.0 on any unit with one control, only the hydraulic “level up”.
|
Chuckster...Once again, I do believe you are correct....I'm still learning and I do believe I just had another learning experience....Thank you. Mine is definitely the 6 point hydraulic system and can be controlled by the One Touch tablet screen as well as the phone app. I guess, what I was thinking before you posted the above info, was that "Ground Control" was the type of system that controls the leveling and then you would have either the electric jacks or the hydraulic jacks, depending on the weight of the trailer and which system the trailer manufacturer used for it. Thanks for squaring me away.....I appreciate ya'.
__________________
2016 F350 King Ranch Crew Cab Dually Diesel 4x4
2018 Grand Design Momentum 394M
2023 Suzuki GSX-S1000GT+
Excessive payload capacity is a wonderful thing
"If it ain't Fast....It ain't Fun"
|
|
|
06-16-2019, 06:27 AM
|
#6
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,341
|
Your welcome. Just for refrence:
GC 3.0 comes in 4 point and 6 point and is electric
Level up ONLY comes in 6 point and is hydraulic.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
06-16-2019, 07:05 AM
|
#7
|
Senior Member
Join Date: Oct 2016
Location: "Murvil, TN
Posts: 2,212
|
Quote:
Originally Posted by chuckster57
Your welcome. Just for refrence:
GC 3.0 comes in 4 point and 6 point and is electric
Level up ONLY comes in 6 point and is hydraulic.
|
Yea, that's what I saw too after you got me corrected and I started looking. I don't know if I would have bet money on it or not (probably not, I'm not much of a gambler), but I could have sworn that I saw something on my 394 about ground control 3. It must have been a fig newton of my imagination!
__________________
2016 F350 King Ranch Crew Cab Dually Diesel 4x4
2018 Grand Design Momentum 394M
2023 Suzuki GSX-S1000GT+
Excessive payload capacity is a wonderful thing
"If it ain't Fast....It ain't Fun"
|
|
|
06-21-2019, 05:54 PM
|
#8
|
Senior Member
Join Date: Dec 2015
Location: Ocean Isle Beach
Posts: 1,431
|
I know I have the extra remote that came with my 2016 Cougar,,,,,, somewhere.
__________________
2022.Montana 3855 BR
2019 F350 6.7 4X4 DRW
|
|
|
06-21-2019, 07:03 PM
|
#9
|
Senior Member
Join Date: Jul 2014
Location: Hemlock
Posts: 816
|
My 2019 Sandpiper 379FLOK has the GC 3.0 6 point hydraulic and the one control system.
__________________
R.J. and Ginger
2019 Ram 3500 6.7 HO, Aisin Trans 3:73
Reese Goosebox
2019 Sandpiper 379FLOK
|
|
|
06-21-2019, 07:06 PM
|
#10
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,341
|
Lippert GC 3.0 Remote LC358601
Quote:
Originally Posted by tech740
My 2019 Sandpiper 379FLOK has the GC 3.0 6 point hydraulic and the one control system.
|
Can you post a picture of the control pad outside in the compartment?
Looking at the Lippert website
Hydraulic system is called Level Up
https://www.lci1.com/automatic-leveling
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
06-21-2019, 07:21 PM
|
#11
|
Senior Member
Join Date: Jul 2014
Location: Hemlock
Posts: 816
|
Quote:
Originally Posted by chuckster57
|
Sure. I will be back at the camper in the morning. I know the hydraulic jack itself says ground control.
This is what mine looks like.
__________________
R.J. and Ginger
2019 Ram 3500 6.7 HO, Aisin Trans 3:73
Reese Goosebox
2019 Sandpiper 379FLOK
|
|
|
06-22-2019, 04:12 AM
|
#12
|
Senior Member
Join Date: Jul 2014
Location: Hemlock
Posts: 816
|
Well Chuckster I suppose you are used to hearing this but you are right again. I must have confused the leveling system on the one I bought with one we looked at. I have level up and one control. Sorry for the confusion.
__________________
R.J. and Ginger
2019 Ram 3500 6.7 HO, Aisin Trans 3:73
Reese Goosebox
2019 Sandpiper 379FLOK
|
|
|
06-22-2019, 05:23 AM
|
#13
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,341
|
Lippert GC 3.0 Remote LC358601
No problem.
GC electric jacks do have the label on them
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
06-22-2019, 10:25 AM
|
#14
|
Senior Member
Join Date: Jul 2014
Location: Hemlock
Posts: 816
|
I know a few we looked at had that labor. I just thought it was in the one we bought. I guess that’s why the DW does the thinking. Lol
__________________
R.J. and Ginger
2019 Ram 3500 6.7 HO, Aisin Trans 3:73
Reese Goosebox
2019 Sandpiper 379FLOK
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|