Go Back   Keystone RV Forums > Keystone Tech Forums > General RV Issues
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 01-20-2018, 07:31 AM   #11
chuckster57
Site Team
 
chuckster57's Avatar
 
Join Date: Jul 2014
Location: Modesto
Posts: 6,296
John: the trick is get the pry bar between the frame and the coroplast. It’s already “smashed” by the washer. Use the same washer and a self tapping screw in the same nail hole and it looks “factory” except it’s a screw not a nail.
__________________

__________________

2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.

Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
chuckster57 is offline   Reply With Quote
Old 01-20-2018, 08:23 AM   #12
JRTJH
Site Team
 
JRTJH's Avatar
 
Join Date: Mar 2011
Location: Gaylord
Posts: 11,094
Chuck, I'll try that again next time I run into nails holding the coroplast. Past experience, there isn't enough "shoulder" on the frame rail to approach it and pry it away placing the crowbar "sideways" on the frame (narrow part) and trying to go under the coroplast or under the nail diagonally or along the frame rail isn't possible because the edge of the coroplast gets in the way. Maybe I'm using a crowbar that's too large? I'll "finagle with it" next time. To me, it's just easier to slip a thin cutting wheel under the coroplast, cut the nail and the coroplast just falls away. That leaves a flat nail to hit with a center punch and it leaves a hole the self tapping screw will fit on reassembly.

I'll play around with it again next time. Thanks.
__________________

__________________
John



2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
JRTJH is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Powered by vBadvanced CMPS v3.2.3

All times are GMT -8. The time now is 09:35 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
This forum is owned and operated by Social Knowledge, LLC. It is not authorized or endorsed by the Keystone RV Company and is not affiliated with the Keystone RV Company or its related companies in any way. Keystone RV® is a registered trademark of the Keystone RV Company.