Have you done a thorough examination of the slide roof seams? Is the upper and side seals making good contact? On my Hornet the seal termination at the bottom of the slide sides is a little odd and I have had to push the lower pieces of the seal back into place (behind the side pieces) a couple of times to make them fit properly and form the correct seal. Get down and take a good look at how the bottom of the sidewall seal ends at the bottom to make sure it extends down past the floor level and see how they are designed. It could enter there.
__________________
2006 Keystone Hornet 29RLS (The Cracker Cabana)
2009 F-250 SuperDuty CC 6.8L/4.10 (The Black Pearl)
|