The lights over my dinette also use 1076 bulbs. They are the ones with the two "solder" contacts on the base and two guide pins near the bottom of the sides. If you have those type bulbs, you might try using an emery board to sand off a small bit of the solder contacts.
On mine, those contacts were too "tall" and the bulbs would insert and work, but not twist and lock, I filed off almost all of the contact and they fit and functioned well.
If, when you get them installed and they don't work, just turn them around, as they are "polarity sensitive".
Good Luck.
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|