|
|
01-23-2018, 06:00 AM
|
#1
|
Junior Member
Join Date: Jan 2018
Location: Bend
Posts: 4
|
Getting bed to stay up?
Hi,
We are new owners of a 2013 Keystone Passport 238.
I am wondering what others may have done to get the bed to stay up while going through or loading the storage bay underneath. Is there any kind of hydraulic arm one could buy or? Just looking for ideas. Thanks!
|
|
|
01-23-2018, 06:07 AM
|
#2
|
Senior Member
Join Date: Aug 2017
Location: Dandridge TN
Posts: 260
|
Yes, there are support struts available for this very purpose. Most any RV dealer and parts store should carry them or go online to a site like etrailer.com or camping world.
|
|
|
01-23-2018, 06:33 AM
|
#3
|
Site Team | Emeritus
Join Date: Dec 2015
Location: Kansas City
Posts: 3,878
|
Doing a search on "bed struts" will lead yu to lots of threads .
Sent from my SAMSUNG-SM-N910A using Tapatalk
__________________
Chip Bruce, RPh
Kansas City, MO
2016 Impact 312
2017 Silverado 3500HD SRW
|
|
|
01-23-2018, 06:51 AM
|
#4
|
Senior Member
Join Date: Oct 2014
Location: Germantown, TN
Posts: 6,328
|
Rob, be careful with the installation and follow the directions to a T. We don't want another episode of "I Love Lucy."
__________________
Jim in Memphis, Wife of 51 years is Brenda
2019 F450 6.7 Powerstroke
2018 Mobile Suites 40RSSA
2021 40' Jayco Eagle
2001 Road king w/matching Harley sidecar
2021 Yamaha X2 Wolverine 1000
|
|
|
01-25-2018, 05:50 PM
|
#5
|
Senior Member
Join Date: Jul 2014
Location: Solomons
Posts: 3,874
|
The right length 2x2 might work.
2016 Passport GT 2810BHS, 2016 F350 CC DRW
__________________
Tom
2019 Alpine 3651RL
2016 F350 CC DRW
|
|
|
01-25-2018, 06:17 PM
|
#6
|
Site Team
Join Date: Mar 2011
Location: Gaylord
Posts: 26,985
|
Quote:
Originally Posted by Tbos
The right length 2x2 might work.
|
^^^ What he said. If the bed platform isn't too heavy and you can easily lift it, it might be much simpler to just build a "prop rod" out of a 1x2 or a 2x2 to just hold the bed platform up while you access the storage. Much like the prop rods that are used to hold up the hood on many cars.
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|
|
|
01-26-2018, 08:08 AM
|
#7
|
Junior Member
Join Date: Jan 2018
Location: Bend
Posts: 4
|
Thank you for your reply. That does sound actually pretty simple. I'll just make it long enough to hold the bed up but short enough to fit back into the bed cubby when done.
|
|
|
01-26-2018, 12:34 PM
|
#8
|
Senior Member
Join Date: Jul 2016
Location: Western NY
Posts: 586
|
Quote:
Originally Posted by Tbos
The right length 2x2 might work.
2016 Passport GT 2810BHS, 2016 F350 CC DRW
|
We never thought of this. What a great idea.
__________________
#####################
Rob
Bereft of TT and looking.
2020 Chevy Silverado 1500 LTZ Z71 6.2L
|
|
|
01-26-2018, 04:39 PM
|
#9
|
Senior Member
Join Date: Jul 2014
Location: Solomons
Posts: 3,874
|
Quote:
Originally Posted by robnrobin
Thank you for your reply. That does sound actually pretty simple. I'll just make it long enough to hold the bed up but short enough to fit back into the bed cubby when done.
|
You might consider screwing a small block on the bottom of the bed to keep it from sliding on you. The other end can be put against a frame piece at the bottom to keep it from sliding. You could also notch it if you wanted to put it on the front edge of compartment.
Sent from my iPad using Tapatalk
__________________
Tom
2019 Alpine 3651RL
2016 F350 CC DRW
|
|
|
01-26-2018, 05:50 PM
|
#10
|
Senior Member
Join Date: Apr 2009
Location: Oregon Coast
Posts: 259
|
I use a piece of 3/4" pvc pipe cut at an angle to fit the platform when up and use a couple of plastic closet rod holders so the pipe will not move.
|
|
|
01-26-2018, 06:35 PM
|
#11
|
Senior Member
Join Date: Jul 2014
Location: Solomons
Posts: 3,874
|
Quote:
Originally Posted by cpaulsen
I use a piece of 3/4" pvc pipe cut at an angle to fit the platform when up and use a couple of plastic closet rod holders so the pipe will not move.
|
Good idea.
Sent from my iPad using Tapatalk
__________________
Tom
2019 Alpine 3651RL
2016 F350 CC DRW
|
|
|
01-27-2018, 03:58 AM
|
#12
|
Senior Member
Join Date: Oct 2017
Location: Rochester, NY
Posts: 590
|
I bought my supports from these guys:
http://www.hatchlift.com/bedlift-kits
__________________
Mike & Barb
2015 Keystone Bullet Premier 26RBPR
2018 Cedar Creek 36CK2
2017 Chevy Silverado LT Z71
|
|
|
01-31-2018, 07:02 PM
|
#13
|
Member
Join Date: Dec 2017
Location: Lake Zurich
Posts: 38
|
I bought this lift kit off Amazon for my 2018 2400bh. I was happy to get the brackets and lifts but needed to get bolts and reinforce the sides. The 2400bh has a very thin sheet of wood under the mattress so if you screw through as the instructions show then you will screw into the mattress. I drilled through and inserted a bolt from the top down. For the installation on the side walls I inserted a piece of wood on each side to reinforce it as the factory boards are 1x1 and not strong enough to support the lifts. The instructions called for 4 inches from the front corner and that worked fine. The top only allows for 39” height and the upper brackets were placed where they extended once I opened it 39”. It all then worked fine with the standard full size queen. I added a foam topper and it still held it open and stayed closed. Make sure you order the right size for your bed type. Also added a couple of battery led lights and finished. RV in storage so don’t have any pictures. Found a few video examples on YouTube and they helped a little.
Love the ease to lift the bed now. Wish it opened more than 39” but it is still helpful. Easy to install.
https://www.amazon.com/dp/B00KPR2DZI..._7.NCAb74JST14
|
|
|
02-01-2018, 10:28 AM
|
#14
|
Senior Member
Join Date: Apr 2016
Location: Bainbridge NY
Posts: 214
|
I installed a 1x2 with a hinge also added a behind a door shoe holder cut it to fit and thumbtacked it to the back wall works good (you can see it a little bit thru laundry opening I made on the side
__________________
2017 Keystone 1750rd
2006 Hummer H3
1968 Oldsmobile 442
1983 Honda CX650C
|
|
|
02-01-2018, 10:44 AM
|
#15
|
Senior Member
Join Date: Jul 2011
Location: Fairhaven, MA
Posts: 354
|
I like the prop rod idea, mush like a car hood. I think I might do that.
Great idea with the laundry door. What did you use to cleanly cut the luan panel to make the opening? I did something similar by building a drawer but I made a mess of the luan panel cutting it.
__________________
Greg
2022 Cougar 25RDS
2024 GMC Sierra 2500HD gas
Fairhaven, MA
|
|
|
02-01-2018, 02:36 PM
|
#16
|
Senior Member
Join Date: Nov 2017
Location: Picacho, Az
Posts: 6,809
|
When cutting the luan use the blue painters tape with your cuts marked over it & cut through the tape with fine toothed blade, no scratches or splinters.
__________________
Full-timed 10+ years
Sold '13 Redwood FB
Traded '13 GMC Denali DRW D/A
Replacement undetermined
|
|
|
02-01-2018, 02:49 PM
|
#17
|
Senior Member
Join Date: Apr 2016
Location: Bainbridge NY
Posts: 214
|
Quote:
Originally Posted by gregrc75
I like the prop rod idea, mush like a car hood. I think I might do that.
Great idea with the laundry door. What did you use to cleanly cut the luan panel to make the opening? I did something similar by building a drawer but I made a mess of the luan panel cutting it.
|
I was thinking of adding a draw on the other side(good match where did you get it ?)
Similar to the Texans I used blue tape and marked it then slowly etched a line with a razor cutter(new blade) drilled small hole in each corner then worked it through and applied pressure ,nice clean cut.
__________________
2017 Keystone 1750rd
2006 Hummer H3
1968 Oldsmobile 442
1983 Honda CX650C
|
|
|
02-01-2018, 03:01 PM
|
#18
|
Senior Member
Join Date: Jul 2011
Location: Fairhaven, MA
Posts: 354
|
Thanks both! I will give that a try.
I built the drawer out of finer grade birch plywood and ordered a matching cabinet door. I used the cabinet door as the drawer front. I ordered it from Trekwood.com
__________________
Greg
2022 Cougar 25RDS
2024 GMC Sierra 2500HD gas
Fairhaven, MA
|
|
|
02-01-2018, 04:38 PM
|
#19
|
Member
Join Date: Dec 2017
Location: Lake Zurich
Posts: 38
|
Quote:
Originally Posted by fourfourto
I installed a 1x2 with a hinge also added a behind a door shoe holder cut it to fit and thumbtacked it to the back wall works good (you can see it a little bit thru laundry opening I made on the side
|
Great job. I love the use of the shoe holder.
Sent from my SM-G950U using Tapatalk
|
|
|
02-01-2018, 04:46 PM
|
#20
|
Member
Join Date: Dec 2017
Location: Lake Zurich
Posts: 38
|
Quote:
Originally Posted by gregrc75
I like the prop rod idea, mush like a car hood. I think I might do that.
Great idea with the laundry door. What did you use to cleanly cut the luan panel to make the opening? I did something similar by building a drawer but I made a mess of the luan panel cutting it.
|
Beautiful work. I hope my wife doesn't see this picture
Sent from my SM-G950U using Tapatalk
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|