|
11-23-2018, 02:39 PM
|
#1
|
Member
Join Date: Jan 2018
Location: Worthington
Posts: 50
|
Rear bumper cargo tray
Want to take my full size grill to TX this year. Got a cargo tray that slides in the bumper hitch. Rated to 500lbs. Grill is probably 150 or less. Minus gas tank. Got it all strapped down and am happy with the security. What I’m scared of is the wobble of the whole setup. Seems like any bump in the road could bounce it into the trailer. Thought about a strap to the ladder but worried bouncing breaking the ladder connections to the trailer. Does anyone have experience with this type of cargo tray. Good or bad. Thanks in advance. Attached pictures. Don’t know if I did it right.
|
|
|
11-23-2018, 02:57 PM
|
#2
|
Senior Member
Join Date: Apr 2017
Location: Winnipeg, MB
Posts: 329
|
You could try a hitch extender to pull it a little further away from the trailer. You would loose some tounge weight but by the sounds of it you have lots to play with if the BBQ is only 150lbs.
__________________
____________
John & Ekeen
2009 Ford F-150 5.4
2015 Nissan Armada 5.6
2021 Keystone Residence 40FLFT
|
|
|
11-23-2018, 03:00 PM
|
#3
|
Senior Member
Join Date: Feb 2014
Location: radium hot springs bc
Posts: 2,007
|
Not to criticize your way of securing the load but I don't think it will stay there going down the road. It looks like it is top heavy. I think I would look at an alternative way to transport it. JMO
__________________
2018 Ram 3500 6.4 Harvest Edition
2018 Cougar 27RESWE
|
|
|
11-23-2018, 06:16 PM
|
#4
|
Senior Member
Join Date: Aug 2012
Location: Waco, Tx
Posts: 5,457
|
From my experience with that carrier, you will drag it off on the first good dip or driveway entrance.
__________________
2015 Ford F350 DRW 6.7 Diesel XL
2020 Avalanche 313 RS
|
|
|
11-23-2018, 07:03 PM
|
#5
|
Site Team
Join Date: Oct 2011
Location: Joppa, MD
Posts: 11,741
|
I'd suggest taping a piece of paper to the grill....If found please call......
__________________
Marshall
2012 Laredo 303 TG
2010 F250 LT Super Cab, long bed, 4X4, 6.4 Turbo Diesel
|
|
|
11-24-2018, 07:36 AM
|
#6
|
Senior Member
Join Date: Nov 2017
Location: Picacho, Az
Posts: 6,809
|
Honestly from the pics can't really tell if it might drag, but to me looks like it should travel ok, if not add more straps.
To stop the wobble they make couple different hitch pin tightening devices, 1 goes inside the hitch, the if he goes over it, that takes a lot of the slop out of the receiver, might try one.
__________________
Full-timed 10+ years
Sold '13 Redwood FB
Traded '13 GMC Denali DRW D/A
Replacement undetermined
|
|
|
11-24-2018, 08:11 AM
|
#7
|
Senior Member
Join Date: Nov 2012
Location: Fruitland
Posts: 3,357
|
I would take ahold of it and see how much bounce and wiggle it has. Then realize it will be doing that same movement maybe faster and more at highway speeds and bumpy roads. That bounce and wiggle will cause failure at some point.
__________________
2013 24RKSWE (27ft TT) Cougar 1/2 ton series SOLD 10-2021
2013 Ford F350 4x4 CC 6.7 engine, 8 ft bed, 3.55 rear end, lariat package
Retired from Oregon State Police in 2011 than worked another 9.5 years as a small town traffic cop:
As of 05-2020, I am all done with 39 years total police work. No more uniforms for me.
|
|
|
11-24-2018, 11:32 AM
|
#8
|
Senior Member
Join Date: Sep 2018
Location: Fairfax
Posts: 507
|
Good grills are top heavy, big cast-iron base and lid sitting on top of a 3' tall flimsy sheet metal cabinet. I feel like this could only end badly.
Is there a reason this is a better idea than something that becomes more compact like a Weber Q2200? I know they are not a full size grill but still offer a very sizable cook top and are more camping friendly. buying a new Q2200 will be cheaper than having to salvage this one off the side of the road.....
Keep in mind, when you hit a bump or pothole on the road, those straps are under tension. The extra force from the load shifting creates a big spike in the tension they are under.
__________________
2019 GMC Sierra 3500HD Denali Diesel DRW (Crew Cab | 8 Ft bed | OEM Puck System | Curt Gooseneck Ball for OEM Puck)
(OLD) 2018 GMC Sierra 2500HD Denali Diesel (Crew Cab | 6.6 Ft bed)
2019 Grand Design Solitude S-Class 3740BH-R Fifth Wheel (Onan 5500W LP Generator | MORryde SRE4000 Suspension | 3x Cross Members | Sailun S637 ST | Reese GooseBox 20k 2nd Gen)
(OLD) 2018 Keystone Hideout 28RKS Travel Trailer
|
|
|
11-24-2018, 12:56 PM
|
#9
|
Member
Join Date: Jan 2018
Location: Worthington
Posts: 50
|
All good points. Think I'll buy one in TX and donate it to the Clubhouse when we come home in April. Thanks to everyone.
|
|
|
12-06-2018, 03:18 PM
|
#10
|
Senior Member
Join Date: May 2017
Location: Grenfell
Posts: 187
|
^^ Good plan!
__________________
2020 F150 ECO SC & 2019 Cougar 22RBS HT
|
|
|
12-09-2018, 08:13 AM
|
#11
|
Junior Member
Join Date: Feb 2015
Location: duncan bc
Posts: 21
|
Hi
Please be aware that due to the location of your barbeque, that the weight estimated at 150#'s will be considerably higher, there is a formula which you plug in the cantilever distance from the rear axle which multiplies the weight. Great location but a "high shock" area, please make sure that your bracket structure is rated for the calculated weight...as you may find yourself dragging the load down the highway without knowing it, I have seen a few generators being dragged !
|
|
|
12-09-2018, 09:50 AM
|
#12
|
Senior Member
Join Date: Jul 2011
Location: Lehigh Acres
Posts: 176
|
To keep the grill from hitting the back of the rig I’d use a foam or inflated inner tube. They will stop most movement. Also run the straps over the bumper and secure it better.
__________________
Rick and Sandy
2017 Toyota Platinum Tundra 4X4
2011 Bullet Premier 19FBPR
|
|
|
12-09-2018, 10:23 AM
|
#13
|
Site Team
Join Date: Mar 2011
Location: Gaylord
Posts: 26,981
|
Be cautious with using foam or an inner tube to "tuck" between the grill and the trailer rear wall. Both of those will rub the FILON and eventually (1 mile or 1000 miles, who knows how long it will take) wear the clear coat off the FILON and if you use an inner tube, it'll leave a black ring where the fiberglass "fibers" rub the black rubber. From my experience, you won't be able to clean the rubber out of the fiberglass substrate, so painting the rear wall is the only way to remove the black ring. YMMV
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|
|
|
12-09-2018, 10:41 AM
|
#14
|
Senior Member
Join Date: May 2017
Posts: 279
|
Agree buy another grill.we left ours home and found one at the good will priced at $5.99 and they knocked off 25% Have used it the last 3 nights works fine .Even though a little pricey.
|
|
|
12-09-2018, 12:34 PM
|
#15
|
Senior Member
Join Date: Aug 2012
Location: Brant Lake,NY
Posts: 321
|
First of all I would replace the pin on the hitch and replace it with hard bolt (5 lines on the Head) so there is no play then I would strap it to the RV frame. this is the voice of experience. I lost a load on I95 and this is what an old timer showed me never had the problem again.
__________________
Gary & Gail
Alfa Gold 3905SH
2016 F350 DWD 4X4 6.7,3.73 Rear
2012 Cougar 318SAB
2015 F350 SWD 4X4 3.55 Rear
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|