Dometic furnace won’t ignite
So my furnace on my 2019 Alpine 3700FL will not ignite. It’s one of the Dometic 35K BTU doorless units. Anyways, when I set the temp high enough to turn on the propane furnace, the blower will activate for 30 seconds but the burner will not come on and then the whole unit shuts down. I was fiddling with it yesterday and I got the burner to come on after power cycling the furnace via the power switch in the body about 10 times. When the temp hit the set point and turned off, the burner did not come on the next time it dipped below the set point.
I do have the in command system as well and I have been reading about issues with that but I don’t believe that’s my issue since the internal temp in my trailer isn’t below 40°.
Any ideas on what could be the issue?
|