Go Back   Keystone RV Forums > Keystone Community Forums > Odds 'n Ends
Click Here to Login


Thread Tools Display Modes
Old 01-25-2019, 06:40 AM   #21
Join Date: Jul 2018
Location: Oak Grove
Posts: 41
Keith, it would be helpful for this, and future posts if you were to put your RV year, make and model in the signature line in your profile for us.
On my unit, the gas line pipe hangs on the frame, and was already plumbed for an external grille, so I just swapped the fitting and regulator on my Blackstone for a female quick-connect gas fitting.
When I got my unit (used, private party) my quick-connect valve had a slight leak, so I replaced it. They are readily available at the RV stores, and come in a kit with both the male and female end. It is a type that looks like a male air quick connect fitting, except it has a safety valve in the form of a lever, which locks the female end from the grille to it.
My unit uses conventional threaded 1/2" black gas pipe. If you have any gas appliances, just `T' into the line at the nearest point where you want your grille to attach. Be sure to check for leaks before using it, with soapy water.

Wingerdinger is offline   Reply With Quote
Old 01-25-2019, 08:21 AM   #22
travelin texans
Senior Member
travelin texans's Avatar
Join Date: Nov 2017
Location: Picacho Peak Rv Resort
Posts: 1,702
The simplest is to buy a "Y" for your propane bottle, if it's exposed, then have your local LP dealer make up a hose to whatever length you want. If the grill has a regulator this setup works great, if it doesn't you may need one on the hose. If you plumb into the line near another of the appliances you will need to remove the regulator from the grill if equipped.
My 5er had the bottle on the curbside, I used the Y & had a 25' hose made so I can place the grill anywhere I want, works great. Buying the parts at the LP dealer is usually cheaper than at at a rv dealer & you can get exactly what you want.

Danny & Linda
travelin texans is offline   Reply With Quote
Old 01-25-2019, 12:29 PM   #23
Senior Member
Join Date: Mar 2017
Location: Petersburg, KY
Posts: 236
I made a few by tapping the threaded end of a quick disconnect fitting to 5/16ths course thread and putting that in place of the regulator. worked like a charm!
Attached Thumbnails



2017 Fuzion 417
2018 Ram 3500 Longhorn
Racebug is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Powered by vBadvanced CMPS v3.2.3

This website is not affiliated with or endorsed by the Keystone RV Company or any of its affiliates in any way. Keystone RVģ is a registered trademark of the Keystone RV Company.

All times are GMT -8. The time now is 09:40 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.