|
02-13-2018, 06:56 AM
|
#1
|
Junior Member
Join Date: Feb 2018
Location: Texas
Posts: 3
|
First trailer and some basic questions
Hello-I purchased a 2004 keystone cougar 290efs to live in while building my house. I paid somebody to deliver it because I only have a half ton truck and have no way to move it. I don’t know anything about travel trailers and have some basic setup questions. Prob going to seem pretty dumb but I gotta learn somehow. So here it goes........
How do I level it? It slopes from back to front and slide out side to door side.
|
|
|
02-13-2018, 07:13 AM
|
#2
|
Junior Member
Join Date: Jan 2018
Location: stringer
Posts: 8
|
Quote:
Originally Posted by Whitney2004
Hello-I purchased a 2004 keystone cougar 290efs to live in while building my house. I paid somebody to deliver it because I only have a half ton truck and have no way to move it. I don’t know anything about travel trailers and have some basic setup questions. Prob going to seem pretty dumb but I gotta learn somehow. So here it goes........
How do I level it? It slopes from back to front and slide out side to door side.
|
Put u some boards under the wheels to raise the rv. On the door side add some more boards. Make sure to chock wheels and put down stabilzer jacks.
Sent from my SAMSUNG-SM-J727A using Tapatalk
|
|
|
02-13-2018, 07:18 AM
|
#3
|
Senior Member
Join Date: Feb 2014
Location: radium hot springs bc
Posts: 2,007
|
Congratulations on the new to you 5er.
The front to back can be leveled with the landing legs.
The side to side can be leveled with a hydraulic jack under the axle at the spring perches. Place appropriate size wood planks under the tires. Of course chock the tires.
__________________
2018 Ram 3500 6.4 Harvest Edition
2018 Cougar 27RESWE
|
|
|
02-13-2018, 07:23 AM
|
#4
|
Junior Member
Join Date: Feb 2018
Location: Texas
Posts: 3
|
Thanks for the replies. Can I operate the landing jacks while the trailer is unhooked from a truck?
|
|
|
02-13-2018, 08:02 AM
|
#5
|
Senior Member
Join Date: Aug 2017
Location: Dandridge TN
Posts: 260
|
You need to level side to side first then do front to back. If you can find a helpful person who has a 5er with a hitch in his truck ask for help otherwise you will have to jack up the door side to put boards under the wheels. Is the ground fairly stable where it is parked? Are you sure your rig does not already have leveling jacks on it? Read your manuals too to help understand the systems.
Yes the jacks operate on the trailers 12 volt battery. Are you able plug into power while you are building? You will have to have a means to keep the battery charged if not.
|
|
|
02-13-2018, 08:17 AM
|
#6
|
Junior Member
Join Date: Feb 2018
Location: Texas
Posts: 3
|
Quote:
Originally Posted by ken56
You need to level side to side first then do front to back. If you can find a helpful person who has a 5er with a hitch in his truck ask for help otherwise you will have to jack up the door side to put boards under the wheels. Is the ground fairly stable where it is parked? Are you sure your rig does not already have leveling jacks on it? Read your manuals too to help understand the systems.
Yes the jacks operate on the trailers 12 volt battery. Are you able plug into power while you are building? You will have to have a means to keep the battery charged if not.
|
Yes the ground is pretty stable. I’m not sure about if it has leveling jacks. I’m heading out there after work today and going to check. If so, are you saying I can use the leveling jacks on the door side to jack the trailer up high enough to put boards under the tires? Which would level it side to side.
And then mess with the landing jacks to get it level front to back?
I do have electricity out there.
|
|
|
02-13-2018, 08:42 AM
|
#7
|
Senior Member
Join Date: Mar 2013
Location: Sequim
Posts: 261
|
From the picture of your rig I’m sure you dont have leveling jacks,the jacks in the back are stablizer jacks not used to jack your rig up. The only one that lift the 5er is the front jacks. You need to level side to side first by putting blocks under tires that are on low side. Then use front jacks to level front to back.
You should find a friend who has a 5th wheel hitch to level you side to side so you can drive the wheels up on the blocks. If you use jacks to jack up be careful not to bend any of your axels
__________________
2016 Montana 3720RL
2015 Chevy Silverado 3500 HD Duromax :
previous
2012 Montana High Country 313RE
2012 Chevy Silverado 2500 HD Duromax
2010 Palimino Bronco
2005 Chevy Silverado CC 1500
|
|
|
02-13-2018, 10:07 PM
|
#8
|
Senior Member
Join Date: Feb 2010
Location: Taylors, SC
Posts: 3,031
|
Here's link to a generic 2005 Keystone owner's manual. I should come in handy if there wasn't one in the trailer. (They don't have one on their site for year 2004).
http://www.keystonerv.com/media/2150...ion_9-1-05.pdf
|
|
|
02-14-2018, 02:01 AM
|
#9
|
Senior Member
Join Date: Oct 2014
Location: Germantown, TN
Posts: 6,333
|
Whitney, welcome to the forum. You'll know all about this beast before your time is up and you move into the house! There is pretty much all the info you might need here, just do as you have and keep asking. What has been answered so far is on the money. When jacking on the axles, put the jack where the springs are attached to the axles, not on the axle itself. One wheel at a time with a board under each until it is level side to side. And as was mentioned, chocks are important.
__________________
Jim in Memphis, Wife of 51 years is Brenda
2019 F450 6.7 Powerstroke
2018 Mobile Suites 40RSSA
2021 40' Jayco Eagle
2001 Road king w/matching Harley sidecar
2021 Yamaha X2 Wolverine 1000
|
|
|
02-14-2018, 03:25 AM
|
#10
|
Site Team | Emeritus
Join Date: Dec 2015
Location: Kansas City
Posts: 3,878
|
Boards use something substantial. 2x10 or 2x12. At least a foot long. Be sure to chock the wheels, front and back, on the side you don't raise. Good luck.
Sent from my SM-N950U using Tapatalk
__________________
Chip Bruce, RPh
Kansas City, MO
2016 Impact 312
2017 Silverado 3500HD SRW
|
|
|
02-18-2018, 05:37 PM
|
#11
|
Senior Member
Join Date: Jan 2018
Location: Midlands of South Carolina
Posts: 277
|
Welcome from South Carolina.
__________________
Bill & Anne, Athena (cat), Jada (pup), and Cupcake (cat)
Retired Navy CPO, Vollie Firefighter and Industrial Maintenance Specialist
Wilson III: 2015 Ram Tradesman 2500 6.4l CC 4x4 SB
the gypsy, Belle III: 2018 Sprinter Limited 3531 FWDEN
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|