Control panel light switches

[Love2rv]

I changed a light bulb above the sink, and as I was doing so the second light above the sink went out. Now all the lights that are controlled at the control panel don’t work.( flood, step, porch, sink, and 3 lights in the ceiling.
The fuses in the panel are all good.
Just wondering if there are more fuses somewhere else.

2014 cougar xlite

[wiredgeorge]

Originally Posted by Love2rv

I changed a light bulb above the sink, and as I was doing so the second light above the sink went out. Now all the lights that are controlled at the control panel don’t work.( flood, step, porch, sink, and 3 lights in the ceiling.
The fuses in the panel are all good.
Just wondering if there are more fuses somewhere else.

2014 cougar xlite

Sounds like 12V lights are out. How did you check the fuses? Visually or test with a multimeter?

[Love2rv]

Just visual

[chuckster57]

What # bulb did you use?

[Customer1]

Originally Posted by Love2rv

Just visual

That is not how to test fuses. Either replace with a known good fuse or test with a meter on the ohm setting.

[bobbecky]

You can test the fuses while they are installed using a voltmeter. With the negative probe grounded, use the positive probe to touch the contacts in each fuse. There are small holes in the top of the blade fuses that are on each side of where the fuse will burn apart. If a fuse is good, you will get power on both sides, and if bad, only one side will be hot because the fuse has burned apart. You can also use one of those DC testers that have one lead with an alligator clip and has a sharp probe at one end and a small bulb at the other.