Quote:
Originally Posted by chuckster57
The rod is threaded into the base on pretty much all the LP trays. Allows for one tray and the choice of rod length for different size cylinders. I would think you could use some thread locker to further slow somebody down.
|
Or a quick "tap" with a welding rod from most any welder. If you don't have one, a 12 volt battery and a set of jumper cables..... No, don't try that unless you know what you're doing. LOL and don't forget to remove BOTH propane tanks before you try anything, including drilling the hole in the cross bar.
Threaded Mode
