TV Mount

[MJM-NY]

I bought a new tv to mount in my 2012 Keystone Laredo, attached is a pic of the mount that can be turned 180 degrees. Any thoughts on what type of adapter i need to get to attach a new tv to this?

[flybouy]

No adapter needed. Mount the 4 screws in the back of the tv, most are 6 mm and slide it onto the keyhole mount.

[MJM-NY]

oh gotchya, those keyholes seem huge to safely hold the TV on. No screws came with the TV and the originals aren't on the current bracket from the trailer. I'll head to hardware store to pick up some TV screws! thanks!!

[wiredgeorge]

Can't recall what size screws are used; M6 (6mm sounds about right. There are four threaded holes on the back of your TV; they use threaded brass inserts. There are several offsets that are common and TV stands are made to accommodate those within the weight holding range for the TV stand. That is why in your picture, the uprights with the slots are held on by 2 screws. You can adjust for the different offsets. You will also want to use some large washers (fender washer type) between screw head and slotted bracket to avoid the possibility of the TV coming out of the brackets. For some reason, I am thinking 5mm but you can buy both M6 and M5 screws to hold the TV.

[itat]

My factory tv mount is a different shape but has the same keyholes for mounting the tv.



The tv is mounted using some plastic spacers with a moulded flange that goes behind the slots and secures the tv in the mount.



I’m going to be swapping out the fixed mount for a swing arm mount so we can turn the tv to a bit better viewing angle.

[MJM-NY]

great info, thank you all!! really appreciate all the help to a newbie!!