|
04-11-2017, 07:12 AM
|
#1
|
Member
Join Date: Apr 2017
Location: Okmulgee
Posts: 51
|
Hardwire EMS Question
Hello, I did a search and came up dry on this topic that is specific to the 2017 Outback 293UBH so If I missed something, I apologize in advance.
Has anyone installed a hardwired EMS with remote in this unit? If so, did you install it next to the converter or other location? I would like to install nearest to the electrical inlet as possible but there is no access without cutting an access panel in the rear bedroom storage area. If my only other option is to remove the breaker panel and install there, I certainly will. It would be nice to know before I tear into it. The dealership PDI was worthless, they couldn't tell me where anything was. I knew more about the working of the trailer than he did. That's another story....
Any help here would be greatly appreciated, and if nobody has done this one, I will certainly document the entire process then post for others to reference.
Thanks in advance!
-CamperDave
|
|
|
04-11-2017, 07:16 AM
|
#2
|
Site Team | Emeritus
Join Date: Jan 2014
Location: Western PA
Posts: 2,732
|
Tons of information on EMS types as well as how members have installed them. Do a search on "EMS" or "Surge"
__________________
2013 RAPTOR 300MP w/Rear Patio Deck NO Folding Side Ladder
2013 Silverado 3500HD LTZ CC LB 4X4 DRW
Duramax 6.6L Turbo Diesel; Allison Trans
Reese 20K; Carlisle Radial Trail RH/HD; TPMS (12 Tires)
Veteran
PSU (GO LIONS)
|
|
|
04-11-2017, 07:37 AM
|
#3
|
Member
Join Date: Apr 2017
Location: Okmulgee
Posts: 51
|
Thanks PARAPTOR! Mostly what I have seen in all my searches have been easy access from a panel or door.
|
|
|
04-11-2017, 07:43 AM
|
#4
|
Gone Traveling
Join Date: May 2016
Location: Highland, IL
Posts: 512
|
I installed mine in a cubby just above the main breaker panel. There is no door to cover it up, however it is in a small cubby so it isn't too much of an eyesore. I had to cut two holes to run the wire to and from the EMS. I also installed the remote display on a nearby wall at eye level.
Sent from my iPhone using Tapatalk
|
|
|
04-11-2017, 08:01 AM
|
#5
|
Senior Member
Join Date: Feb 2015
Location: Texas
Posts: 1,090
|
I installed mine behind the converter/electrical panel.
I also added an extra AC outlet, with USB charging ports, while I was in there.
-Brian
__________________
2014 Bullet Premier 22RBPR - let the camping commence!
2013 F150 Platinum - 5.0 - 3.55 ELD + towing package
|
|
|
04-11-2017, 08:23 AM
|
#6
|
Member
Join Date: Apr 2017
Location: Okmulgee
Posts: 51
|
Outback 325BH - A cubby would be nice, however, my breaker panel is located directly under the oven.
Brian- My hot water tank is where your breaker panel is. Thanks for the pics! Yours is in a great location, anytime you have a chance to add an outlet is a plus, especially if it has USB charging ports.
|
|
|
04-11-2017, 08:36 AM
|
#7
|
Senior Member
Join Date: Feb 2015
Location: Texas
Posts: 1,090
|
Quote:
Originally Posted by CamperDave
Outback 325BH - A cubby would be nice, however, my breaker panel is located directly under the oven.
Brian- My hot water tank is where your breaker panel is. Thanks for the pics! Yours is in a great location, anytime you have a chance to add an outlet is a plus, especially if it has USB charging ports.
|
Could you not mount it behind the breaker panel, there should enough room, unless there is something else in the space?
-Brian
__________________
2014 Bullet Premier 22RBPR - let the camping commence!
2013 F150 Platinum - 5.0 - 3.55 ELD + towing package
|
|
|
04-11-2017, 08:38 AM
|
#8
|
Gone Traveling
Join Date: May 2016
Location: Highland, IL
Posts: 512
|
Quote:
Originally Posted by B-O-B'03
Could you not mount it behind the breaker panel, there should enough room, unless there is something else in the space?
-Brian
|
I wanted to put mine behind the breaker box, however my converter is located there.
Interesting how many different configurations these campers have.
Sent from my iPhone using Tapatalk
|
|
|
04-11-2017, 09:19 AM
|
#9
|
Member
Join Date: Aug 2014
Location: St. Louis, MO
Posts: 46
|
I did the same as B-O-B'03. Pulled out the breaker panel and installed it behind it. Was easier than I thought. I also did the same as B-O-B'03 and installed a new breaker and an additional plug exactly where he did. The only difference is, additionally, I also added a plug to the outside that wires directly to a second duplex outlet right next to the one wired off of the breaker panel. That way I have an additional 110v 15Amp circuit for a heater that doesn't use up my camper 30amp. Granted, when I use it I'm relying on the camp site's breaker.
|
|
|
04-11-2017, 09:47 AM
|
#10
|
Site Team
Join Date: Mar 2011
Location: Gaylord
Posts: 26,997
|
There is almost always enough room behind the breaker panel to install an EMS. That said, there are only 4 screws that hold the breaker panel in place, so it's a simple process to remove it to check. Be sure to unplug shore power before you start removing the panel. At most, it's a 10 minute job to get a #2 Roberts screwdriver, unplug shore power, pull the 4 screws and check it out.... With the information gained, moving to the next step (planning where to install the EMS) is much easier to do.
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|
|
|
04-11-2017, 10:55 AM
|
#11
|
Member
Join Date: Apr 2017
Location: Okmulgee
Posts: 51
|
Thanks guys! I tend to agree about installing behind the breaker panel. It appears to have plenty of room back there.
|
|
|
04-11-2017, 12:47 PM
|
#12
|
Senior Member
Join Date: Feb 2015
Location: Texas
Posts: 1,090
|
Quote:
Originally Posted by CamperDave
Thanks guys! I tend to agree about installing behind the breaker panel. It appears to have plenty of room back there.
|
For mine I was able to just cut the existing cord and connect it to either end of the EMS.
-Brian
__________________
2014 Bullet Premier 22RBPR - let the camping commence!
2013 F150 Platinum - 5.0 - 3.55 ELD + towing package
|
|
|
04-11-2017, 01:49 PM
|
#13
|
Senior Member
Join Date: Oct 2016
Location: "Murvil, TN
Posts: 2,212
|
I know, totally different trailer, ect., but I ended up putting mine in the baggage compartment right next to the transfer switch, since I was installing on the load side of the T.S.
__________________
2016 F350 King Ranch Crew Cab Dually Diesel 4x4
2018 Grand Design Momentum 394M
2023 Suzuki GSX-S1000GT+
Excessive payload capacity is a wonderful thing
"If it ain't Fast....It ain't Fun"
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|