For you members that have these PUCK glass lenses lights, is there an easy to get these glass covers off so the bulbs can be changed. I have taken some off but never the same way: some I have been able to turn and get a finger or two between the glass and the ceiling and pull down, some almost had to hang from the ceiling before they came loose, and then the most recent would not turn nor could I get my fingers under the glass.
The only way I got it off was to get wood shims between the glass and ceiling and tap gently and eventually pry them loose.
Knowing that I eventually want to change all bulbs to LED I will have to face this problem about fifteen more times. There has to be another way
__________________
2013 RAPTOR 300MP w/Rear Patio Deck NO Folding Side Ladder
2013 Silverado 3500HD LTZ CC LB 4X4 DRW
Duramax 6.6L Turbo Diesel; Allison Trans
Reese 20K; Carlisle Radial Trail RH/HD; TPMS (12 Tires)
Veteran
PSU (GO LIONS)