|
06-17-2010, 07:42 AM
|
#1
|
Senior Member
Join Date: May 2010
Location: Newport News, Va
Posts: 302
|
Cougar Slide buttons
Question: On our new 318sab the control panel seems like it was setup wrong,
The buttons for the 3 slides don't match the location of the acutal slide....
The bedroom slide is correct but the 2 slides in the back are swapped so they don't correlate to the panel, Is this nit picky? It seems like they would match the location of the slide... Wonder if I can change this somehow...
Sorry if this doesn't make sense..
|
|
|
06-17-2010, 10:03 AM
|
#2
|
Site Team
Join Date: Mar 2009
Location: Fraser Valley BC Canada
Posts: 7,015
|
Not having a wiring diagram of the control panel, I am wondering if you could remove the panel and switch the wires so that the two rocker switches correspond to the correct slides. If you are close to your dealer, take it back and get them to correct this goof. Another solution might be to switch the labels but they may get ruined in the process OR make a new set of labels and stick them over the correct switch. No, I dont think you are being nit-picky, but merely expecting what would seem to be a very reasonable assumption ----- that it has been wired and labelled correctly by the manufacturer.
__________________
2008 Cougar 5th Wheel 27RKS
2005 2500 GMC Duramax
|
|
|
06-17-2010, 12:14 PM
|
#3
|
Senior Member
Join Date: May 2010
Location: Newport News, Va
Posts: 302
|
No dealer is 4 hours away, Even the salesman was having issues remembering which switch controls which slide....
I was thinking of opening the panel and just switching the two switches....
|
|
|
06-17-2010, 12:57 PM
|
#4
|
Site Team
Join Date: Jun 2009
Location: Venice
Posts: 5,346
|
Quote:
Originally Posted by kenn209
Question: Is this nit picky?
|
No it is not! If the switches are side by side I would change them to the way you want them. I did this with my lighting panel (Four switches) so the switches match the location of the lights. "Nit picky" maybe, but they are MY lights. Just be sure to disconnect the battery while moving the switches and hope the wires are long enough. (All this assumes the switches are right next to each other)
Happy camping, Hank
__________________
Hank & Lynn
2007 Cougar 290RKS, E-Z Flex, 16" XPS RIBs ( SOLD .. Gonna miss her ... looking for new 5r)
2004.5 Dodge 2500 QC, LB, 5.9HO, WestTach gauges, Ride-Rite
|
|
|
06-17-2010, 01:04 PM
|
#5
|
Senior Member
Join Date: May 2010
Location: Newport News, Va
Posts: 302
|
Yeah, The main reason is the slide on the passenger side is very close to my house when the camper is parked, So if I extend the wrong slide or my son or wife, could do some damage to the slide.... Will look into labeling or movig the switches.
|
|
|
06-17-2010, 01:39 PM
|
#6
|
Senior Member
Join Date: May 2010
Location: Plymouth,Ia
Posts: 109
|
My Cougar was the same. Just remove the panel and change the wires on the switch's(they plug in). I thought it was a oversight, but must be the way they are all wired from the factory.
__________________
2010 2500HD LTZ Duramax
2010 Cougar 327RES
|
|
|
08-09-2010, 03:12 PM
|
#7
|
Member
Join Date: Jul 2010
Location: Indiana
Posts: 91
|
Switches
I have a 327 also and the switchs had no label except to say it was a switch for the slide, so I just got a label maker and marked them myself, when i get time Ill take the panel off and swap the wires around. Anybody else find that all the books that come with your unit are so vague its like they don't want you to know anything and go to a dealer pay good money for something simple we can do in the driveway.
|
|
|
08-10-2010, 01:31 PM
|
#8
|
Member
Join Date: Jul 2010
Location: Berea, Ky
Posts: 35
|
My gray and black water tanks were labeled backwards. We couldnt figure out why the shower backed up when the gray water valve was open. My daughter actually discovered the problem. Going to get a label maker and label the correctly and also label my slide switches.
__________________
2011 Copper Canyon 324 FWBHS 5'er
2008 Silverado 2500 Crew Cab 4X4
|
|
|
08-10-2010, 01:42 PM
|
#9
|
Senior Member
Join Date: Mar 2010
Posts: 452
|
Quote:
Originally Posted by ptodd47
My gray and black water tanks were labeled backwards. We couldnt figure out why the shower backed up when the gray water valve was open. My daughter actually discovered the problem. Going to get a label maker and label the correctly and also label my slide switches.
|
I can see the Friday afternoon work crew at Keystone laughing their butts off when they mislabeled the valves, I'm betting they got a good laugh out of that. What they don't realize is that the jokes on them, eventually NO ONE will buy an American product because of their stupidity....and remember no one at Keystone even checked their work.
Ron W.
|
|
|
08-10-2010, 02:46 PM
|
#10
|
Member
Join Date: Jul 2010
Location: Berea, Ky
Posts: 35
|
Yes quality control should have caught that one for sure. No big deal for us but just puzzeling why they did that.
__________________
2011 Copper Canyon 324 FWBHS 5'er
2008 Silverado 2500 Crew Cab 4X4
|
|
|
08-10-2010, 05:56 PM
|
#11
|
Senior Member
Join Date: Jul 2009
Posts: 145
|
For reasons that are not yet clear me the rocker switch for our electric awning was not in the panel right next to the door ( where one could see the awning actually move) but was over by the bathroom. While it was painful to re-pull the wires...all those nasty staples sticking down into the attic I did move the switch to the same panel that houses the light and slide switches. The panel is very flex-able and you can move the switches around to suit your needs. I have a label maker that I use to mark the switches with what they are actually doing.
__________________
2010 Cougar 24RKS
2012 Dodge RAM 2500
6.7 Turbo
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|