Go Back   Keystone RV Forums > Keystone Fleet | Keystone RV Models > Lite Weight Trailers
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 12-20-2015, 06:25 PM   #1
RGene7001
Senior Member
 
Join Date: Jul 2013
Location: FL
Posts: 116
Wires going to the frame of my Passport

Good evening,
Today I adjusted my brakes due to continuing weak braking I've described in one of my prior posts. Next week we are going to the East coast of Florida so I will see if the problem is solved. While under the trailer I spotted 2 wires going to the frame. I suspect they are ground wires for 12 and 110 volt systems. My main concern, however, is that they are very close to the right rear wheel and are going to be invariably destroyed in the event of tire delamination. Would you leave them as is, or modification is necessary? Best way to do it.
Thank you.
Attached Thumbnails
Click image for larger version

Name:	2015-12-20 21.11.18.jpg
Views:	114
Size:	69.1 KB
ID:	9829   Click image for larger version

Name:	2015-12-20 21.10.08.jpg
Views:	105
Size:	68.4 KB
ID:	9830  
__________________

__________________


Gene.
_______________
'16 Passport 2670 BH
'11 Mercedes ML 350 gas, Reinforced OEM hitch receiver,1000 lb Eaz-Lift with custom welded head, 2 sway control bars, Prodigy P2 - ALL SETUP by Canam RV, Ontario, Canada
TST 507 trailer TPMS


'13 Passport 2650 BH- traded in
RGene7001 is offline   Reply With Quote
Old 12-20-2015, 08:28 PM   #2
chuckster57
Site Team
 
chuckster57's Avatar
 
Join Date: Jul 2014
Location: Modesto
Posts: 6,124
I would probably put a nice wire loom over them and go about your business.
Another option is to extend the wires and route them around the perimeter of the wheel well, that way they wouldn't be so much in the line of fire but again I would put them in a loom.
__________________

__________________

2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.

Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
chuckster57 is offline   Reply With Quote
Old 12-21-2015, 03:46 AM   #3
Pull Toy
Senior Member
 
Join Date: Mar 2015
Location: Southeastern Connectiut
Posts: 638
+ 1 for Chuckster57

At the risk of stating the obvious, make sure to unplug, and disconnect your battery, just in case these are live wires.
__________________

Pull Toy

Steve & Jan, Ava & Emma (Mini Schnauzers):
2016 F350 Lariat 4X4 Powerstroke CC/SB "PULLTOY V"
2013 Alpine 3535RE "MAGIC CARPET III"
Proud Navy Vet!
Pull Toy is offline   Reply With Quote
Old 12-26-2015, 07:04 AM   #4
Tbos
Senior Member
 
Tbos's Avatar
 
Join Date: Jul 2014
Location: MD
Posts: 2,769
Wires going to the frame of my Passport

I'd consider rerouting them as suggested. Keep a close watch on my tires, pressures, and speed then enjoy your rig.
__________________
Tom
2016 Passport 2810BH
2016 F350 CC DRW
Tbos is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Powered by vBadvanced CMPS v3.2.3

All times are GMT -8. The time now is 06:18 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This forum is owned and operated by Social Knowledge, LLC. It is not authorized or endorsed by the Keystone RV Company and is not affiliated with the Keystone RV Company or its related companies in any way. Keystone RV® is a registered trademark of the Keystone RV Company.