Anderson Kantleak Valves

[Pete C]

Hello from San Diego, CA. Looking for some advice on converting my 4 position anderson valve to a three position anderson valve. I hooked it up but the system won't pressurize. Also the sanitize position are on opposite side on the new valve.

Thanks for any help

[ChuckS]

Looked at your profile and see you have an Alpine.. the 4 way to 3 way all brass valve upgrade is a simple install

I would double check your install on the hoses

https://docs.wixstatic.com/ugd/99f63...b0fe50e2de.pdf

Image of old 4 way versus new 3 way..

And YES. The sanitize position on the new valve is different from old 4 way valve

[Pete C]

Thanks ChuckS,
I was able to go on the ABCO web site and find the correct plumbing of the hose valve. Sure enough I had a few hose crossed up. I don't know why they don't send instructions with the new valve but everything is working great now. I was getting water tricking into my fresh water tank and coming out the overflow vent which was the main issue for the repair.

Thanks for responding, Pete C

[ChuckS]

You will like that 3 way valve much better than the old 4 way style. Nice thing is you leave it in same position for city water or if using water pump..

[Pete C]

Definitely a huge upgrade with the new valve not having to switch back and forth