 |
07-07-2017, 02:29 PM
|
#1
|
|
Senior Member
Join Date: Apr 2015
Location: nm
Posts: 1,833
|
Manual crank for land gear
I have put near 25000 miles on my 2015 311 impact . I'm inspecting things and decided to try the crank for the landing gear before taking off to sturgis this month . The landing gear motor shaft is bigger then the crank pipe , the crank fit the smaller electric sizzors jack in the back fine. I put the crank in my vice and drilled it out to fit the landing gear shaft.
|
|
|
|
07-07-2017, 02:55 PM
|
#2
|
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,317
|
Does it still work on the rear jacks?
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
|
|
07-07-2017, 03:11 PM
|
#3
|
|
Senior Member
Join Date: Apr 2015
Location: nm
Posts: 1,833
|
Drilling out the crank has Not effected the sizzors jacks , I beleave I have the sizzors jack crank and don't know it the rig was suppose to come with two cranks.
__________________
2018 1 ton 4x4 c.c standard bed GMC Denali
Anderson ultimate hitch
2015 311 Impact Fusion toy hauler
2018 Milwaukee 8 FLRTU roadglide glide ultra
2018 800 Z force spot BUGGY. 
500 watts of solar enough power for boon docking.
|
|
|
|
|
07-07-2017, 03:22 PM
|
#4
|
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,317
|
As long as it works, I wouldn't worry too much.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
|
|
07-07-2017, 05:09 PM
|
#5
|
|
Senior Member
Join Date: Apr 2015
Location: nm
Posts: 1,833
|
It's working like it should . My point is being away from home and having the landing gear motor brake. No problem I have the handy crank sliding it in wtf it's to small . Well good thing that didn't happen to me.
__________________
2018 1 ton 4x4 c.c standard bed GMC Denali
Anderson ultimate hitch
2015 311 Impact Fusion toy hauler
2018 Milwaukee 8 FLRTU roadglide glide ultra
2018 800 Z force spot BUGGY.
500 watts of solar enough power for boon docking.
|
|
|
|
|
07-07-2017, 09:28 PM
|
#6
|
|
Senior Member
Join Date: Jul 2014
Location: Nevada
Posts: 2,695
|
Have you ever lubed the zerks on the gear legs? Easier on the motor.
__________________
 Desert185 🇺🇸 (Retired Chemtrail vendor)
-Ram 2500 QC, LB, 4x4, Cummins HO/exhaust brake, 6-speed stick.
-Andersen Ultimate 24K 5er Hitch.
-2014 Cougar 326SRX, Maxxis tires w/TPMS, wet bolts, two 6v batts.
-Four Wheel 8' Popup Camper.
|
|
|
|
|
07-08-2017, 02:42 AM
|
#7
|
|
Senior Member
Join Date: Apr 2015
Location: nm
Posts: 1,833
|
I'm saying iinspected the landing gear crank to be sure it's the right one for the motor . It takes very little effort to lower and raise the landing gear with the crank.
__________________
2018 1 ton 4x4 c.c standard bed GMC Denali
Anderson ultimate hitch
2015 311 Impact Fusion toy hauler
2018 Milwaukee 8 FLRTU roadglide glide ultra
2018 800 Z force spot BUGGY.
500 watts of solar enough power for boon docking.
|
|
|
|
|
07-08-2017, 07:31 AM
|
#8
|
|
Senior Member
Join Date: Jul 2014
Location: Nevada
Posts: 2,695
|
Quote:
Originally Posted by roadglide
I'm saying iinspected the landing gear crank to be sure it's the right one for the motor . It takes very little effort to lower and raise the landing gear with the crank.
|
I was thinking long term. The initial lube from the factory seemed minimal on my rig.
__________________
Desert185 🇺🇸 (Retired Chemtrail vendor)
-Ram 2500 QC, LB, 4x4, Cummins HO/exhaust brake, 6-speed stick.
-Andersen Ultimate 24K 5er Hitch.
-2014 Cougar 326SRX, Maxxis tires w/TPMS, wet bolts, two 6v batts.
-Four Wheel 8' Popup Camper.
|
|
|
|
|
07-15-2017, 06:51 PM
|
#9
|
|
Senior Member
Join Date: Apr 2015
Location: nm
Posts: 1,833
|
I don't think my 311 has zerts for the land gear.ill check it out thanks for the thought.
__________________
2018 1 ton 4x4 c.c standard bed GMC Denali
Anderson ultimate hitch
2015 311 Impact Fusion toy hauler
2018 Milwaukee 8 FLRTU roadglide glide ultra
2018 800 Z force spot BUGGY.
500 watts of solar enough power for boon docking.
|
|
|
|
|
07-16-2017, 03:51 PM
|
#10
|
|
Junior Member
Join Date: Aug 2013
Location: Rio Rancho
Posts: 25
|
Where are the grease fittings for the landing gear?
|
|
|
|
|
07-23-2017, 09:15 AM
|
#11
|
|
Senior Member
Join Date: Apr 2015
Location: nm
Posts: 1,833
|
There are two zerts I found them at the motor on the right side for my 311.
|
|
|
|
|
07-23-2017, 11:01 AM
|
#12
|
|
Senior Member
Join Date: Jul 2014
Location: Nevada
Posts: 2,695
|
I have two zerk fittings at the top of each gear leg.
__________________
Desert185 🇺🇸 (Retired Chemtrail vendor)
-Ram 2500 QC, LB, 4x4, Cummins HO/exhaust brake, 6-speed stick.
-Andersen Ultimate 24K 5er Hitch.
-2014 Cougar 326SRX, Maxxis tires w/TPMS, wet bolts, two 6v batts.
-Four Wheel 8' Popup Camper.
|
|
|
|
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
