|
08-17-2018, 04:57 PM
|
#1
|
Junior Member
Join Date: Jul 2018
Location: Nixa
Posts: 11
|
Where is my antenna booster? (305RL)
We just got a 2018 Montana High Country 305RL. I can’t figure out how to get my antenna TV to work. I do the “auto scan” and it doesn’t find any channels...even in an urban setting. I called Camping World and they said to find a small button that is the antenna booster. I can’t find one anywhere. Does anyone have a 305RL that could help? I’d love to watch some TV and am frustrated that I can’t figure it out. Thanks!!
|
|
|
08-17-2018, 05:12 PM
|
#2
|
Senior Member
Join Date: Jul 2014
Location: Hemlock
Posts: 816
|
If you follow the coax cable from the tv back to the wall, there should be a button on the plastic plate it screws into.
__________________
R.J. and Ginger
2019 Ram 3500 6.7 HO, Aisin Trans 3:73
Reese Goosebox
2019 Sandpiper 379FLOK
|
|
|
08-17-2018, 05:34 PM
|
#3
|
Senior Member
Join Date: May 2011
Location: Virginia Beach
Posts: 175
|
Try the bedroom coax hookup where it goes in the outlet too. Sometimes the button for the booster is at the bedroom TV.
__________________
2019 Montana HC 331RL
2017 F250 Super Duty Crew Cab
|
|
|
08-17-2018, 05:35 PM
|
#4
|
Site Team
Join Date: Mar 2011
Location: Gaylord
Posts: 26,996
|
Typically it looks like this photo. It will be connected to one of the TV's by the coax cable. Which TV? That's a question I can't answer for your floorplan. Some are in the bedroom, some are in the main cabin, some are buried in a closet, hidden from view. Anyway, this is what it should look like.
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|
|
|
08-17-2018, 06:11 PM
|
#5
|
Junior Member
Join Date: Jul 2018
Location: Nixa
Posts: 11
|
Found it!
Thank you all so much. I found it behind the bedroom TV. I had been looking all around the living room TV.
One more TV question...I am now able to do the auto scan on the living room TV and watch shows perfectly. I went into the bedroom to set up my Furrion set there, I hit menu on the remote and I see the icons for Pucture, Sound, Time, Setup, Lock, and Channel. When I try to scroll over to Channel, it just jumps back to Pucture. I can’t find the auto scan on that TV. I also couldn’t find it in the Setup screen. Any suggestions?
|
|
|
08-17-2018, 06:22 PM
|
#6
|
Site Team
Join Date: Mar 2011
Location: Gaylord
Posts: 26,996
|
I can't help you with the Furrion TV setup menu. I've never had one, and from the feedback that I've seen, I wouldn't buy one. Have you contacted Furrion Customer Support? They have an online presence as well as a phone support system. Maybe they can help you "undo the mystery"....
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|
|
|
08-19-2018, 09:30 AM
|
#7
|
Member
Join Date: Aug 2014
Location: Sergeant Bluff IA
Posts: 71
|
my Apine has it n the bed room above the bedroom TV
|
|
|
08-19-2018, 10:05 AM
|
#8
|
Senior Member
Join Date: Mar 2014
Location: Mountain Home, Idaho
Posts: 3,013
|
Go to page 29 of this manual. You will need to select OTA or TV antenna or some verbiage such as that and do an auto scan.
Also if you hook up to park cable you will need to turn that tv antenna booster off, go back into menu on tv, select cable tv, and a new auto scan.
https://www.furrion.com/store/attach...c4e486ee0b62a0
__________________
2007 GMC Classic club cab 4x4 Duramax LBZ
2014 Alpine 3010 RE. 34 foot fifth wheel
|
|
|
08-19-2018, 10:16 AM
|
#9
|
Senior Member
Join Date: Oct 2017
Location: Brisbane Australia
Posts: 708
|
Quote:
Originally Posted by EDM
Thank you all so much. I found it behind the bedroom TV. I had been looking all around the living room TV.
One more TV question...I am now able to do the auto scan on the living room TV and watch shows perfectly. I went into the bedroom to set up my Furrion set there, I hit menu on the remote and I see the icons for Pucture, Sound, Time, Setup, Lock, and Channel. When I try to scroll over to Channel, it just jumps back to Pucture. I can’t find the auto scan on that TV. I also couldn’t find it in the Setup screen. Any suggestions?
|
Access to the channel scan is governed by the input source mode. If you have the TV on video or one of the HDMI inputs, the channel scan is not accessible.
ALSO
If the TV is set for "TV" for the source, also check that the type of source is set to "TV" and not "Cable" or your channel scan will come up blank. The reverse is also true if you're connected to "Cable" from the CG pedestal.
Aske me how I found THIS out...
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|