Generac 7500E 30A Connection to trailer?
I have a Generac 7500E home generator. I use it periodically when the electric goes out at my house. I use the 30A port to power a manual switch for circuits in my house. I also have a Champion 3100W that I use when boondocking.
For maintenance, I start each every month and let them run for about 30-40 minutes each after putting a load on them. For both, I would normally simply plug in a set of 1000w halogen lights for a while to each generator. However, lately I have just been plugging in my trailer to the Champion's 30A RV connection and turn on the AC to exercise the Champion.
My question is about the 30A connection on the Generac. It says it is 120v/240V at the 30A port. I am assuming that it will use whatever is needed between the 120/240. I know the trailer should never be on 240V. I do not see a switch of any type that allows me to move from 120 to 240 and back. I have the cable converter from the 30A NEMA L14-30R to the standard RV port. I just wanted to ensure that it would work with out any adjustment to the L14-30R port as far as voltage. Like I said, I assume that it will use 120V when using the dogbone connector.
Thanks
__________________
Bobby
2021 Nights Camped 55
2021 GD Reflection 150 260RD (Current)
2018 Keystone 24RKPR (Previous)
2016 Ram 2500 Tradesman CTD
|