Go Back   Keystone RV Forums > Keystone Tech Forums > Repairs & Maintenance
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 11-01-2018, 01:13 PM   #1
Wally Dad
Junior Member
 
Join Date: Sep 2017
Location: Jeffersonville
Posts: 3
SEA Tri Slide Shower Door Track Wheel

Hi all:

Our middle shower door lost a screw in one of the track wheels. I have the screw and can see where it goes, but I can't figure out how to access the track. It looks like it's a part of the header, so I can't just pop off the header to access the rails . Here's a few pictures. One shows the outside of the shower doors. The picture with the red circle shows where the screw is missing (the track wheel is on the other side in the track). The last shows the header at one end. Any suggestions on how I can screw the track wheel back on?
Attached Thumbnails
Click image for larger version

Name:	Shower door 2.jpg
Views:	27
Size:	116.8 KB
ID:	19147   Click image for larger version

Name:	Shower Door 3.jpg
Views:	28
Size:	181.1 KB
ID:	19148   Click image for larger version

Name:	Shower doors 1.jpg
Views:	28
Size:	57.3 KB
ID:	19149  
__________________

Wally Dad is offline   Reply With Quote
Old 11-01-2018, 01:22 PM   #2
chuckster57
Site Team
 
chuckster57's Avatar
 
Join Date: Jul 2014
Location: Modesto
Posts: 8,124
The shower doors are “hung” on the top rail. You have to lift out the top rail with the doors and then you slide them out the end.
__________________

__________________

2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.

Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
chuckster57 is online now   Reply With Quote
Old 11-01-2018, 01:45 PM   #3
Wally Dad
Junior Member
 
Join Date: Sep 2017
Location: Jeffersonville
Posts: 3
Quote:
Originally Posted by chuckster57 View Post
The shower doors are “hung” on the top rail. You have to lift out the top rail with the doors and then you slide them out the end.
Well, that figures. So I have to remove two screws, break the silcone seal (which really isn't needed at the header anyway) and remove the doors though one end of the header in order to fix this. Geesh!

Thanks for the quick response. This seems to be the way to do it.
Wally Dad is offline   Reply With Quote
Old 11-01-2018, 04:17 PM   #4
jsmith948
Senior Member
 
Join Date: Jan 2012
Location: Central San Joaguin Valley, CA
Posts: 1,892
Can you get the screw started then use an offset screw driver to tighten the screw?
__________________

Jack & Marty
2018 Laredo 298 SRL
2011 F-250 SB Crew Cab 4x4 6.7L
jsmith948 is online now   Reply With Quote
Old 11-01-2018, 05:19 PM   #5
Snoking
Senior Member
 
Snoking's Avatar
 
Join Date: Aug 2018
Location: Lake Stevens
Posts: 225
On our Bighorn 3575el I had this happen. I was able with a lot of patience I was able to get it back on with blue loctite on the treads without removing the header. Was not easy!!! Chris
__________________
2019 Laredo 225MK for travel. Bighorn 3575el summer home in Washington, Park Model with Arizona Room for winters.
Snoking is offline   Reply With Quote
Old 11-05-2018, 06:00 AM   #6
Fishsizzle
Senior Member
 
Fishsizzle's Avatar
 
Join Date: May 2018
Location: Oregon
Posts: 134
This was our “first” repair job in our new Alpine. Needed HW help to start the screws and set the whole mess back on. Replaced every screw and yes, with blue loctite
__________________

Fishsizzle is offline   Reply With Quote
Reply

Tags
rack, slide

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by the Keystone RV Company or any of its affiliates in any way. Keystone RV® is a registered trademark of the Keystone RV Company.


All times are GMT -8. The time now is 08:04 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.