|
|
01-25-2019, 11:47 AM
|
#1
|
Junior Member
Join Date: Jun 2017
Location: Carson City
Posts: 28
|
bike hitch
need some ideas- we have a 2017 Keystone Hideout and am in need of ideas - we would like to add a bike hitch to the rear bumper and we found one at Camper World but from the picture and what our bumper looks like, we think it would be impossible to attach. the rear bumper is square 4"x4" BUT half is under the main frame of the unit with only about 2" available which would not allow the bike bracket to be attached. See attached photos. the photos got posted upside down - sorry
Any ideas on how to attach a bike hitch or if you know of any bike hitches that would fit. Any and all suggestions gratefully appreciated.
|
|
|
01-25-2019, 12:04 PM
|
#2
|
Senior Member
Join Date: Feb 2017
Location: Potsdam
Posts: 319
|
Search "RV Bumper Hitch Receiver" on Amazon. There are a number of different products similar to this: Swagman RV Approved Bumper Adapter https://www.amazon.com/dp/B00174ZHGU..._MI2sCbDVJK7TJ
You could use it with a receiver hitch bike rack.
They can be mounted "upside down" with the thin plate on top of the bumper, but be aware that does reduce your clearance on inclines.
And you also need to be aware that that much weight may cause your bumper mount to fail. Check with your dealer for specs or to see about having it reinforced.
__________________
2015 Bullet 220RBI
2019 Chevy Colorado extended cab V6 3.6 liter
|
|
|
01-25-2019, 01:23 PM
|
#3
|
Senior Member
Join Date: Feb 2014
Location: radium hot springs bc
Posts: 2,007
|
I believe Curt makes a hitch that bolts directly to your TT frame. This is what you want. Not hanging a bike rack on that flimsy sewer hose container.
__________________
2018 Ram 3500 6.4 Harvest Edition
2018 Cougar 27RESWE
|
|
|
01-25-2019, 01:29 PM
|
#4
|
Senior Member
Join Date: Feb 2017
Location: Potsdam
Posts: 319
|
Curt and Draw-Tite both make frame mounted hitch receivers. I agree, a much better option.
__________________
2015 Bullet 220RBI
2019 Chevy Colorado extended cab V6 3.6 liter
|
|
|
01-25-2019, 03:34 PM
|
#5
|
Senior Member
Join Date: Feb 2016
Location: SE Michigan
Posts: 1,659
|
As others have already alluded to, you don't NOT want to install a bumper mounted receiver on a trailer. It's NOT a matter of "if" it will fail, but "when" it will fail. The failure point is the thin sheet metal of the bumper.
More appropriate options are to fabricate and weld a hitch directly to the frame rails of your coach. Etrailer sell a few that are very universal to a trailer application. This is the one I had installed: https://www.etrailer.com/RV-and-Camp...35-946403.html
Your other option (if your hideout is a travel trailer) is an elevated bike rack that bolts on to the a-frame. I bought and installed this one last year. It performs better than a rear receiver hitch bike rack as there is more stability and less turbulence at the front near the tongue. My $$$ bikes thanked me!
__________________
2017 Keystone Bullet 308BHS in Saddle.
2017 RAM 2500 Laramie Mega Cab 4x4 Hemi 6.4L
2008 GMC Yukon XL Denali (SOLD)
Hensley SwiftArrow Control Hitch with 1000 lb Spring Bars
Me, DW, (3) little DS's, and 1 rambunctious Boston Terrier
|
|
|
01-25-2019, 04:15 PM
|
#6
|
Senior Member
Join Date: May 2016
Location: South Jordan, Utah
Posts: 2,228
|
Just wanted to reinforce what Busterbrown said. DO NOT use the camping world bolt on receiver. When loaded, it will tear your bumper away from the frame. Go to a welding shop and have them weld receiver hitch to your frame. That's the only safe way to use hitch mounted bike racks. Our son-in-law found out the hard way about using the bolt on.
Trailer bumpers are barely strong enough to hold the sewer hose let alone a couple of bikes bouncing back there on a cantilever.
__________________
2017 Cougar 279RKSWE
2007.5 Dodge Ram 2500 6.7 Cummins
Retirement Training Completed
I think the little voices in my head have started a chat group.
|
|
|
01-27-2019, 01:55 PM
|
#7
|
Junior Member
Join Date: Oct 2017
Location: Stewartville
Posts: 1
|
Bike hitch installed on 2017 Sprinter
I had searched a long time for a bike carrier for our travel trailer, and I also have read and seen the bad results of attaching a carrier to the bumper hitch. Ultimately, we decided to go with a Lippert Jack-It Two Bike A Frame mounted bike rack. We have put many miles on this unit with two bikes attached and it is as stable today as the day I installed it on the trailer. It does take a bit of doing to get the front bike mounted, so I usually stand on my pickup tailgate to place and remove that bike. We have a topper on our pickup, but this rack and bikes pose no problem with turning and all. It is comforting to be able to see the bikes, instead of wondering what might be happening if they were rear mounted on the trailer, in my opinion.
|
|
|
01-27-2019, 04:05 PM
|
#8
|
Senior Member
Join Date: Jun 2015
Location: LA
Posts: 467
|
I just went through this same ordeal. Decided on having a shop weld a reciever to the rear, connected to the frame. Got a yakima rack designed for the back of an rv.
https://www.yakima.com/roadtrip
|
|
|
01-27-2019, 10:08 PM
|
#9
|
Senior Member
Join Date: Feb 2016
Location: SE Michigan
Posts: 1,659
|
Quote:
Originally Posted by KSH
I just went through this same ordeal. Decided on having a shop weld a reciever to the rear, connected to the frame. Got a yakima rack designed for the back of an rv.
https://www.yakima.com/roadtrip
|
Smart decision. Less worry for you and every driver following behind you!
__________________
2017 Keystone Bullet 308BHS in Saddle.
2017 RAM 2500 Laramie Mega Cab 4x4 Hemi 6.4L
2008 GMC Yukon XL Denali (SOLD)
Hensley SwiftArrow Control Hitch with 1000 lb Spring Bars
Me, DW, (3) little DS's, and 1 rambunctious Boston Terrier
|
|
|
01-28-2019, 01:38 AM
|
#10
|
Member
Join Date: Oct 2018
Location: Willis
Posts: 42
|
Quote:
Originally Posted by Shane48
I had searched a long time for a bike carrier for our travel trailer, and I also have read and seen the bad results of attaching a carrier to the bumper hitch. Ultimately, we decided to go with a Lippert Jack-It Two Bike A Frame mounted bike rack. We have put many miles on this unit with two bikes attached and it is as stable today as the day I installed it on the trailer. It does take a bit of doing to get the front bike mounted, so I usually stand on my pickup tailgate to place and remove that bike. We have a topper on our pickup, but this rack and bikes pose no problem with turning and all. It is comforting to be able to see the bikes, instead of wondering what might be happening if they were rear mounted on the trailer, in my opinion.
|
We bought this one as well. It takes some effort to get the back bike on/off, but overall it is very solid and I am happy with the purchase.
__________________
2018 Keystone Hideout 177lhs (Ethel)
2015 F-150 V-8 (Fred)
|
|
|
01-28-2019, 06:04 AM
|
#11
|
Senior Member
Join Date: May 2018
Location: Markham, Ontario
Posts: 1,942
|
Quote:
Originally Posted by Shane48
I had searched a long time for a bike carrier for our travel trailer, and I also have read and seen the bad results of attaching a carrier to the bumper hitch. Ultimately, we decided to go with a Lippert Jack-It Two Bike A Frame mounted bike rack. We have put many miles on this unit with two bikes attached and it is as stable today as the day I installed it on the trailer. It does take a bit of doing to get the front bike mounted, so I usually stand on my pickup tailgate to place and remove that bike. We have a topper on our pickup, but this rack and bikes pose no problem with turning and all. It is comforting to be able to see the bikes, instead of wondering what might be happening if they were rear mounted on the trailer, in my opinion.
|
Thanks Shane, you made my mind up for me.
__________________
Dan & Serena
2019 GMC SIERRA 2500 HD SLE
2015 Cougar X-Lite 29 RET
|
|
|
01-28-2019, 05:28 PM
|
#12
|
Senior Member
Join Date: Jul 2016
Location: Western NY
Posts: 586
|
I worry about having the bikes on a hitch behind the TT. I can't see them.
My current method is to remove the front wheel and lay them in the bed of the truck. I have a tonneau cover and with the wheel on the handlebars are too tall.
I've looked at hitches that straddle the tanks. Don't look solid.
__________________
#####################
Rob
Bereft of TT and looking.
2020 Chevy Silverado 1500 LTZ Z71 6.2L
|
|
|
01-28-2019, 07:33 PM
|
#13
|
Senior Member
Join Date: Jun 2015
Location: LA
Posts: 467
|
Before i got the hitch i had a piece of wood, slightly raised with some quick releases spaced out. That way the bikes stood up, without the front wheel and didn't scratch anything. I got tired of pulling the wheels on and off. I just took the 2x4 out of the truck when i didn't need it. Worked well.
https://www.amazon.com/MBP-Alloy-Rel...ke+mount&psc=1
|
|
|
01-28-2019, 07:47 PM
|
#14
|
Site Team
Join Date: Mar 2011
Location: Gaylord
Posts: 26,997
|
One could mount two of those quick release fork clamps on a 2x4, remove the cushions from the trailer dinette, store the cushions on the bed, secure the 2x4 on the wooden bench of the dinette, place the bikes on the fork clamps and transport the bikes inside the trailer. It would be easy and much more secure than transporting them on the rear bumper.
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|
|
|
01-29-2019, 04:27 AM
|
#15
|
Senior Member
Join Date: Apr 2012
Location: Portland, OR
Posts: 4,224
|
Quote:
Originally Posted by Shane48
I had searched a long time for a bike carrier for our travel trailer, and I also have read and seen the bad results of attaching a carrier to the bumper hitch. Ultimately, we decided to go with a Lippert Jack-It Two Bike A Frame mounted bike rack. We have put many miles on this unit with two bikes attached and it is as stable today as the day I installed it on the trailer. It does take a bit of doing to get the front bike mounted, so I usually stand on my pickup tailgate to place and remove that bike. We have a topper on our pickup, but this rack and bikes pose no problem with turning and all. It is comforting to be able to see the bikes, instead of wondering what might be happening if they were rear mounted on the trailer, in my opinion.
|
Quote:
Originally Posted by Northofu1
Thanks Shane, you made my mind up for me.
|
This is great solution for bikes on a TT, we have a pin box bike rack on our 5er, much better for the bikes.
__________________
Russ & Paula and Belle the Beagle.
2016 Ram Laramie 3500 DRW 14,000# GVWR (New TV)
2005 Copper Canyon 293 FWSLS 32’ GVWR 12,360
Visit and enjoy Oregon State Parks
|
|
|
01-30-2019, 05:47 PM
|
#16
|
Junior Member
Join Date: Aug 2018
Location: linn, Texas
Posts: 16
|
330RL laredo bike rack bolted to main frame
|
|
|
01-31-2019, 09:26 AM
|
#17
|
Senior Member
Join Date: Jul 2011
Location: Lehigh Acres
Posts: 176
|
FYI if you mount anything to the rear bumper of your TT this will void your Keystone Warranty. So I would have a frame mounted rear hitch put on.
__________________
Rick and Sandy
2017 Toyota Platinum Tundra 4X4
2011 Bullet Premier 19FBPR
|
|
|
01-31-2019, 10:53 AM
|
#18
|
Senior Member
Join Date: Dec 2018
Location: Wood River,IL
Posts: 121
|
I used a bolt on receiver hitch mount for a bike carrier and used it only one time before I removed it. Bent the bumper so bad the waste hose wouldn’t slide thru anymore. Frame mount is the way to go.
__________________
2018 Bullet Premier 22RBPR
2019 F-150 XLT 5.0 Super Crew FX4
Wood River, IL
|
|
|
01-31-2019, 11:58 AM
|
#19
|
Member
Join Date: May 2013
Location: Helena, AL
Posts: 35
|
I had the same mounting problem on my Montana HC 5th wheel. I got this rack from etrailer.com, Swagman 4 Bike Carrier RV Mounted Bike Rack Item #S80600. You mount the mounting bolts from the bottom up, instead of the top down, underneath the trailer. I also bought bumper reinforcement brackets from SafetyStruts.com or www.mount-n-lock.com. They cradle the rear bumper on three sides to keep the bumper from rolling and breaking the welded mount or twisting, because each bracket is mounted to the trailer frame member with three nuts and bolts. They claim to support 400 lbs., so you can "Put more gear on your rear" to quote the MnL web site. Had them a year so far carrying a Schwinn Meridian 3-wheeler and no problems.
__________________
Jerry Rowell - N4QPC
Helena, Alabama
2004 Chevy 2500HD Crew Cab LS, 6.0L,
2014 Montana High Country 318RE with Ground Control Electric Auto Leveling System
|
|
|
01-31-2019, 06:43 PM
|
#20
|
Junior Member
Join Date: Jan 2018
Location: London
Posts: 4
|
We have a Hideout 175LHS. We mounted a different bike rack on the bumper and half way to our destination we had to stop and take the bikes and spare tire off as the bumper was almost torn off. When we got to our destination we were lucky and found a shop who repaired and reinforced the bumper. It held up on our return trip.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|