The Border tape that Keystone uses has a very sticky backing. I would use heat to try to get it to loosen up. A hair dryer would work well. The border is fairly thick but will tear so keep heating ahead of the area you are pulling it off of. I have only ever put it on. I've never had to take it off but that's how I would do it. Goo Gone should clean up the adheasive.
__________________
2004 F350,CCLB SRW 6.0Powerstroke, 4.30 Gears, Curt 1,500 Lb. Hitch with sway control *2017 Fuzion Impact 312, Sailun S637 Tires 2011 Passport 2910 BH, 2006 Jayco 232, 2000 Dodge Ram 1500 5.9L, ReeseDualCam, Prodigy P3
|