Quote:
Originally Posted by MarkS
Chuck,
Just a suggestion. I made a mark on the landing gear at the full up position, so I know when it is about to be all the way up. I don't think it needs to be fully retracted anyway. Never blown a fuse. JM2c
|
This!! My mark is an inch from fully retracted. I used a permanent marker and drew a line where it can be seen from the landing gear switch.
__________________
2015 Ford F-350 XLT Ruby Red 6.7L Powerstroke, 4x4, Short Bed, Andersen Ultimate Hitch
Cougar High Country 299RKS, Mor/Ryde pin box, 200w solar
|