|
|
05-05-2017, 07:02 AM
|
#1
|
Senior Member
Join Date: Apr 2017
Location: Oswego
Posts: 604
|
Finished sewer hose mod
Thanks to the many postings on this type of mod. With the new "4 prong" sewer hose connection a sewer hose will no longer fit in the rear bumper. So I sought out advice on the forum and found some great plans. Special thanks goes out to Srvnt and 440justin for the pictures and parts list - they were a great help!
__________________
RV - 2017 Avalanche 320RS
TV - 2011 Chevy Silverado 3500HD LTZ CCLB Duramax SRW 4X4
|
|
|
05-05-2017, 07:14 AM
|
#2
|
Site Team | Emeritus
Join Date: Jan 2014
Location: Western PA
Posts: 2,732
|
Yeap, that's it , 8 foot container holds my 15' and 10' sewer hose. Savings for you is now you will not be repairing a rusted out bumper.
Looks Good
|
|
|
05-05-2017, 07:43 AM
|
#3
|
Senior Member
Join Date: Apr 2017
Location: Oswego
Posts: 604
|
Quote:
Originally Posted by PARAPTOR
Yeap, that's it , 8 foot container holds my 15' and 10' sewer hose. Savings for you is now you will not be repairing a rusted out bumper.
Looks Good
|
Did end up cutting off 16" of the 5"x5" X 8' Vinyl Blank Post so it would fit. Drilled 4 holes in the bottom for drainage.
__________________
RV - 2017 Avalanche 320RS
TV - 2011 Chevy Silverado 3500HD LTZ CCLB Duramax SRW 4X4
|
|
|
05-28-2017, 07:11 AM
|
#4
|
Junior Member
Join Date: May 2017
Location: Dayton
Posts: 2
|
Quote:
Originally Posted by NorskeBob
Thanks to the many postings on this type of mod. With the new "4 prong" sewer hose connection a sewer hose will no longer fit in the rear bumper. So I sought out advice on the forum and found some great plans. Special thanks goes out to Srvnt and 440justin for the pictures and parts list - they were a great help!
|
What a great idea! Thanks
|
|
|
05-28-2017, 02:13 PM
|
#5
|
Senior Member
Join Date: Mar 2013
Location: Silvis, IL
Posts: 262
|
Looks good 😁 !
Sent from my Nexus 7 using Tapatalk
__________________
2013 Passport Elite 23RB
2012 Ford F150 EcoBoost 4x4
|
|
|
10-23-2017, 01:31 PM
|
#6
|
Senior Member
Join Date: Sep 2011
Location: Northville NY in the Adirondacks
Posts: 2,128
|
I used some PVC gutter as a "drawer" inside the 5x5 PVC fence post material. It fits in the post like it was made for it. We cut up some scrap 3/4" thick PVC boards to use as ends and dividers and then fastened them into the gutter with some flat head stainless steel screws. The gray handles on the end are electrician's conduit clamps.
The end caps are standard PVC 5x5 fence post caps drilled through and held in place with a long aluminum nail cut to length and the end rounded off with a file.
__________________
'11 Cougar 326MKS loaded with mods
'12 Ford F250 SuperCab 6.7 PowerStroke Diesel
Amateur Radio: KD2IAT (146.520) GMRS: WQPG808 (462.675 TPL 141.3)
|
|
|
10-29-2017, 07:41 PM
|
#7
|
Junior Member
Join Date: May 2017
Location: Canton, Michigan
Posts: 14
|
My belly is sealed up how do you mount this thing?
|
|
|
10-30-2017, 12:44 AM
|
#8
|
Senior Member
Join Date: Feb 2016
Location: SE Michigan
Posts: 1,659
|
Quote:
Originally Posted by Sallen80
My belly is sealed up how do you mount this thing?
|
There are multiple ways to secure it to the frame below the coroplast. This is one way I did in order to clear LPG lines on the frame rail. Think angle iron and perforated metal strips.
__________________
2017 Keystone Bullet 308BHS in Saddle.
2017 RAM 2500 Laramie Mega Cab 4x4 Hemi 6.4L
2008 GMC Yukon XL Denali (SOLD)
Hensley SwiftArrow Control Hitch with 1000 lb Spring Bars
Me, DW, (3) little DS's, and 1 rambunctious Boston Terrier
|
|
|
10-30-2017, 02:11 AM
|
#9
|
Senior Member
Join Date: Aug 2017
Location: Lafayette
Posts: 1,068
|
Looks like a great setup. As for Sallen80s question, most RV frames still show the outer flange of the I-beam on each side so drilling a couple 5/16" holes into that flange to mount or hang something underneath won't hurt a thing.
__________________
2015 Ram,3500,Dually,B&W,4.10s,Aisin,Limited,Silver
2018 Raptor,428SP w/full body paint
2012 Harley, Ultra Limited
|
|
|
10-30-2017, 04:12 AM
|
#10
|
Junior Member
Join Date: May 2017
Location: Canton, Michigan
Posts: 14
|
Thank you both.
Going to tackle this next year
|
|
|
10-30-2017, 05:18 AM
|
#12
|
Senior Member
Join Date: Sep 2011
Location: Northville NY in the Adirondacks
Posts: 2,128
|
Quote:
Originally Posted by Sallen80
My belly is sealed up how do you mount this thing?
|
Mine is fastened to the 4x4 steel bumper with some straps and u-bolts. But I have the slide-out tray. I store 4x4 cribbing in the steel bumper and wanted to keep all this stuff in one place.
There are plenty of ways to fasten things like this to the trailer. As pointed out, the bottom of the steel frame rails is easily accessible for running in self tapping bolts or screws without disturbing the coroplast. You should be able to see the row of bolts holding up the coroplast and propane line on each side of the trailer. That defines the left and right main frame rails. Draw a line, drill a hole.
EVERYTHING needed to do this mod (and many others) is readily available at Home Depot, Lowes, etc.
__________________
'11 Cougar 326MKS loaded with mods
'12 Ford F250 SuperCab 6.7 PowerStroke Diesel
Amateur Radio: KD2IAT (146.520) GMRS: WQPG808 (462.675 TPL 141.3)
|
|
|
10-30-2017, 03:01 PM
|
#13
|
Senior Member
Join Date: Aug 2016
Location: Rincon
Posts: 192
|
Beam clamps with loctite and all-thread worked for me!
__________________
2017 Ram 3500 CC Cummins
2011 Keystone Laredo 266 RL
|
|
|
10-31-2017, 02:18 AM
|
#14
|
Senior Member
Join Date: Aug 2017
Location: Lafayette
Posts: 1,068
|
Quote:
Originally Posted by kksfish
Beam clamps with loctite and all-thread worked for me!
|
Seen another post showing beam clamps...personally I wouldn't use those on an RV because we used them in the construction industry and they can and will spread and become loose. Loctite will keep the bolt from backing out but it won't prevent the clamp from spreading. For something that doesn't move they'd be okay but not on something moving and possibly working back and forth. I still would recommend drilling holes and mounting the pipe that way.
__________________
2015 Ram,3500,Dually,B&W,4.10s,Aisin,Limited,Silver
2018 Raptor,428SP w/full body paint
2012 Harley, Ultra Limited
|
|
|
10-31-2017, 03:52 AM
|
#15
|
Senior Member
Join Date: Oct 2014
Location: Germantown, TN
Posts: 6,327
|
Along the same lines as Tinner, bear in mind that beam clamps have very coarse threads with a considerable amount of slack. Locktite is not going to work all that reliably in a vibrating moving vehicle.
__________________
Jim in Memphis, Wife of 51 years is Brenda
2019 F450 6.7 Powerstroke
2018 Mobile Suites 40RSSA
2021 40' Jayco Eagle
2001 Road king w/matching Harley sidecar
2021 Yamaha X2 Wolverine 1000
|
|
|
10-31-2017, 01:40 PM
|
#16
|
Senior Member
Join Date: Aug 2016
Location: Rincon
Posts: 192
|
I used the cast clamps not the aluminum ones! I have had good luck with these type clamps for many years in lots of applications including moving-vibrating equipment and in large piping systems......Just my own experience!
__________________
2017 Ram 3500 CC Cummins
2011 Keystone Laredo 266 RL
|
|
|
10-31-2017, 02:20 PM
|
#17
|
Senior Member
Join Date: Aug 2016
Location: Rincon
Posts: 192
|
These are the ones I like
__________________
2017 Ram 3500 CC Cummins
2011 Keystone Laredo 266 RL
|
|
|
01-05-2018, 03:24 PM
|
#18
|
Junior Member
Join Date: Jan 2018
Location: West Fork
Posts: 23
|
Is this in response to the stupid too short sewer hose storage that my 2018 came equipped with?
__________________
2018 Chevrolet High Country 3500 Duramax
2018 Keystone Alpine 3900RE Toy Hauler
|
|
|
04-09-2018, 09:22 AM
|
#19
|
Junior Member
Join Date: Apr 2018
Location: Springfield
Posts: 5
|
Quote:
Originally Posted by SteveC7010
I used some PVC gutter as a "drawer" inside the 5x5 PVC fence post material. It fits in the post like it was made for it. We cut up some scrap 3/4" thick PVC boards to use as ends and dividers and then fastened them into the gutter with some flat head stainless steel screws. The gray handles on the end are electrician's conduit clamps.
Attachment 14409
Attachment 14410
The end caps are standard PVC 5x5 fence post caps drilled through and held in place with a long aluminum nail cut to length and the end rounded off with a file.
|
I'm going to build the sewer hose carrier for our "new to us" Bullet Premier. However, I was already using the PVC gutter as a sewer support at campgrounds to prevent premature hose failure. I took an 8' section, cut it in half, and adjust it to length using small 1" C-clamps. I use leveling blocks to get proper slope to the sewer connection.
|
|
|
04-09-2018, 10:03 AM
|
#20
|
Senior Member
Join Date: Mar 2013
Location: Silvis, IL
Posts: 262
|
I have not had any issues with using beam clamps, in the 4 years and 15,000 miles ( for what that is worth). I do however check that it is still holding tight before every trip while doing my pre trip walk around of the truck and trailer before I leave the storage lot/campground.
__________________
2013 Passport Elite 23RB
2012 Ford F150 EcoBoost 4x4
|
|
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|