Go Back   Keystone RV Forums > Keystone Fleet | Keystone RV Models > Fifth Wheels
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 10-26-2014, 10:50 AM   #1
C88cox
Junior Member
 
Join Date: Oct 2014
Location: Heavener, OK
Posts: 3
Copper Canyon 269 RLS Deadbolt

Ok got a Copper Canyon and the deadbolt is stuck in the locked position. The key won't go all the way in either, I've soaked the deadbolt in wd-40, tried pushing on the door, everything I can think of. There is no other access point to the inside besides breaking out a window and that's not a option. Thought about pulling it to the dealership but I have a t.v. set up in the bedroom. I have a buddy coming over with a locksmith set to try and pick it open, my question is if he can't get it open could I drill out the deadbolt and open it that way? I would rather replace a $30 lock then a $100 window or several $100 t.v.
__________________

C88cox is offline   Reply With Quote
Old 10-26-2014, 01:33 PM   #2
C88cox
Junior Member
 
Join Date: Oct 2014
Location: Heavener, OK
Posts: 3
Well you can drill out the deadbolt and get all the tumblers out then use a flathead screw driver and open the deadbolt.
__________________

C88cox is offline   Reply With Quote
Old 10-26-2014, 01:37 PM   #3
chuckster57
Site Team
 
chuckster57's Avatar
 
Join Date: Jul 2014
Location: Modesto
Posts: 7,890
I saw your first post, but it was a while after you posted it. So I was waiting to see the outcome. I figured you would have to drill out the tumbler. Did you by chance insert the key, set the deadbolt and pull the key out in the horizontal position rather than turning back to vertical?

FIC has a recall on a series of locks that will do what your lock did I believe, just search for "lock recall". You may be eligible for new lock at no cost.
__________________

2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.

Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
chuckster57 is offline   Reply With Quote
Old 10-26-2014, 04:17 PM   #4
Ken / Claudia
Senior Member
 
Join Date: Nov 2012
Location: Gladstone,Ore
Posts: 2,186
When mine quit turning I had jammed the key in and broke off the end. Since I have 2 doors I used the other door to get into the trailer and unscrewed the whole lock work. I used a drill to drill out the cylinder and key. It was not difficult. If the lock is drilled while the door is on the trailer, do not put much weight into the drill, you will bent the door or break it. Let the drill bit do the work, not your arm. My door had a recalled lock. Phoning them did not work. They have a special web site request for recalled locks that worked for me in about 1 week. I phoned them and 5 months passed without keys. New locks took about 1 minute to install.
__________________
2013 24RKSWE (27ft TT) Cougar 1/2 ton series
2002 Ford F350 4x4 CC 7.3 with aftermarket auto transmisson.
18ft 200hp jet boat.
Yellow Lab "Dacoda"
Retired Oregon State Police
Now a small town traffic cop
Ken / Claudia is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by the Keystone RV Company or any of its affiliates in any way. Keystone RVģ is a registered trademark of the Keystone RV Company.


All times are GMT -8. The time now is 01:39 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.