Quote:
Originally Posted by Tim-Rhonda
Once we get it I'll need to look at the lines upfront to do that mod. I don't see us ever using that W/D prep. Sounds like you probably just added cut off valves? I'll need to look into that.
|
I was going to add cutoff valves but after I got in behind the bulkhead I decided to just cut the tee out of both lines and hard splice the lines back together using sharkbite coupling and clamps.. If anyone ever wants the washer connections it will be a simple matter to reconnect the lines with a tee.
Most difficult part was getting the bulkhead down and out of the way, well that and spending a 1/2 hour with a shop-vac getting all the sawdust out from behind the bulkhead.. I then removed all the floor registers and cleaned all the sawdust and insulation from the vents while I had the shop-vac there.
Next thing will be changing out the one-way valve on the water heater and installing a 3 valve bypass so the cold water don't backup to the showerhead every time you pause the water.
Only other thing that comes to mind is a water hammer for the toilet, it do thump a bit.
We love the 333MKS and I'm sure you will too..