Quote:
Originally Posted by mel07green
Yes, Dave, I do have a question. How do you get to the blind. Or rather, do you need to move that hard window surround?
|
If you get down low and look up into the inside of that hard window surround, you should see some brackets and screw heads. Just remove the screws and the whole surround comes off.
To put it back on, line up the holes in the surround with the holes in the brackets and put the screws back in.
If there is cloth material between the brackets and the surround box, use an indelible marker to mark the screw holes as you pull each screw. Don't move the surround until you've marked all the holes.
__________________
'11 Cougar 326MKS loaded with mods
'12 Ford F250 SuperCab 6.7 PowerStroke Diesel
Amateur Radio: KD2IAT (146.520)
GMRS: WQPG808 (462.675 TPL 141.3)