Go Back   Keystone RV Forums > Keystone Fleet | Keystone RV Models > Lite Weight Trailers
Click Here to Login


Thread Tools Display Modes
Old 10-09-2018, 03:26 PM   #21
Junior Member
Mrmiata's Avatar
Join Date: Aug 2018
Location: Kellyville
Posts: 7
Originally Posted by B-O-B'03 View Post
Measure ohms across the connections of the element it should be fairly low, if not it is most likely bad.

As part of my shutdown procedure, after a trip, I flip the breaker for the water heater off, since I have 30 amp service at the parking pad and would hate for someone to flip on the heater, with no water in the tank.

Sounds like a great idea to add to my to do list.. !

Mrmiata is offline   Reply With Quote
Old 10-10-2018, 07:40 AM   #22
Junior Member
Join Date: Sep 2018
Location: Tecumseh
Posts: 22

Well folks, I just spoke with the dealership and they just said not to bother poking around with my meter because I'm under bumper to bumper warranty. I'll be dropping it off Friday evening, and they estimate they'll get to it Tuesday or Wednesday at the latest, as they already have every possible replacement part for the Atwood water heater.

I should be picking up Wednesday next week to bring home and winterize.

The service manager did tell me that Dometic has changed suppliers for the water heater control boards recently due to quality issues, and they do have the newer version of the board in stock, which is what they suspect to be the issue.

I'll get back with an update when I pick it up next week. Thanks for all of the help and troubleshooting!

Bechard is offline   Reply With Quote
Old 10-18-2018, 02:20 PM   #23
Junior Member
Join Date: Sep 2018
Location: Tecumseh
Posts: 22
Update time folks!

It turns out that one of the AC wires wiggled out of it's crimp and was still contained inside the plastic connector on my water heater. Prior to bringing the trailer in under warranty I did take a good look, and did see a male/female connector for the AC side of the water heater. I didn't bother taking the meter to it, as I'm still under bumper to bumper warranty.

I should have taken a photo while I had the compartment open to open the hot water bypass last night, but I didn't think to do so. Repair was recrimping the wire on this quick disconnect, and it fired right up. The technician checked other similar crimps and didn't find any problems.

I'm so very happy we took the new trailer out within a few weeks of purchase for a maiden break in voyage. The dealership was quick in fixing the issue and showed me the repair.

I just finished winterizing last night, dot it looks like we should be all ready for our next trip in March! I did take some of the advice here and turned the water heater breaker off to prevent accidental dry tank running.

Thanks folks, you're all an amazing source of insight and help, especially for this green travel trailer camper!

Bechard is offline   Reply With Quote

bullet, heat, heater, water, water heater

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Powered by vBadvanced CMPS v3.2.3

This website is not affiliated with or endorsed by the Keystone RV Company or any of its affiliates in any way. Keystone RVģ is a registered trademark of the Keystone RV Company.

All times are GMT -8. The time now is 01:15 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.