I had very similar/the same problem on my Fuzion. I have 2 fresh tanks and the fill line not only sagged, but had a "T" in it to fill both tanks at once. Well, the straight part of the "T" went from the fill to the first tank with sensors, the second tank only got about 1/2" of water in it but the gauge said full. So I removed the "T", bought 2 matching factory fillers off ebay and now I fill each tank separate. It looks bone stock and I know they are full! My water pump line was kinked very hard and the water always spit and sputtered, so a new line solved that problem. But it has a "T" also to draw off both tanks at once, well the line to the front tank from the "T" was like 6" long and like 4' to the rear so needless to say it used the front tank first then just sucked air and would not pull from the second tank, so back under and made the lines equal length and finally my water system works as it should have from the factory!!!
__________________
2005 2500HD CCLB Duramax. LBZ mouthpiece, factory CAI mod, Diamond eye "quiet" downpipe back exhaust/ Reese elite under bed rail hitch
2008 Fuzion 362
2008 KFX 700
2007 Yamaha Wolverine(wife's)
2002 Suzuki LT-A50(daughter's)
1995 Yamaha G14 golf cart
|