Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 

Go Back   Keystone RV Forums > Keystone Fleet | Keystone RV Models > Toy Haulers
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 05-13-2013, 12:38 PM   #1
isosceles
Junior Member
 
Join Date: Mar 2013
Location: Canada
Posts: 9
Interior Cargo Door Opens While Travelling

Hi all;

No matter what I do, the door from the living space to the garage ALWAYS opens when I travel (even a short distance).

It takes a great deal of effort to close the door (as I know they want a good seal), but what good is a nice seal if the door opens right away and slams around when driving.

This is on a 2013 Fuzion 301, and I am wondering if anyone else has this issue, and if you have had it, what have you done to fix it............ I am loath to install ugly clasps to hold the door shut, but it may get to that point.

Let me know, and thanks.
isosceles is offline   Reply With Quote
Old 05-13-2013, 03:19 PM   #2
Dogman
Junior Member
 
Join Date: Mar 2013
Location: Suffolk Va.
Posts: 29
My 2013 Fuzion 301 does the same.Door is open when we stop and I know I shut it good.
__________________
2009 Ford F250 Super Duty FX4 6.4L twin turbo diesel, Chipped, K&N, Air Lift 5000 Airbags,WirelessAIR On-Board Air Compressor System, Hilwig Sway Bar.
2013 Fuzion FZ 301,
2005 Ranger 500, 2011 Ranger 800 XPES,
2006 Harley Ultra Classic
Dogman is offline   Reply With Quote
Old 05-13-2013, 05:56 PM   #3
mwhit
Member
 
Join Date: Feb 2013
Location: PA
Posts: 30
Same thing happens to my 2013 Fuzion 300.
The frame must flex enough to allow the latch too unlatch.
When that happens the seal pops the door open.
I have so far place a box outside the door to prevent it swinging wildly, but also need to come up with a good solution.

Happy Camping!!!! Mike
__________________
2011 F-250 Lariat Crewcab 6.2 gas
2013 Fuzion 300
mwhit is offline   Reply With Quote
Old 05-14-2013, 07:44 AM   #4
saltflatracer
Junior Member
 
saltflatracer's Avatar
 
Join Date: Sep 2011
Location: Oregon
Posts: 17
Wink

We have a 2012 Raptor and I found the same thing happened to me. I put a small eye hook in the outer edge of the inside door frame & then wrap a small bungee cord with hooks on each end around the door handle & into the hook. Haven't had a problem since!
__________________
2012 Keystone Raptor 4014LEV
2008 Chev 3500 Dually
saltflatracer is offline   Reply With Quote
Old 05-14-2013, 02:36 PM   #5
Vidorcom
Senior Member
 
Vidorcom's Avatar
 
Join Date: Mar 2012
Location: Costa Rica
Posts: 102
door

2012 keyston fuzion 300 that does the same. I put something in front of it to prevent from slamming the wall. It would be nice if it stayed closed like it was intended to.
__________________
2012 Keyston Fuzion FZ300
2008 Duramax Tow Vehicle
Vidorcom is offline   Reply With Quote
Old 05-14-2013, 02:39 PM   #6
Festus2
Site Team
 
Join Date: Mar 2009
Location: Fraser Valley BC Canada
Posts: 7,015
Would a sliding bolt work to hold the door shut? You can get them in various sizes and the bolt and backing are screwed into the door. Drill a shallow hole in the floor just deep enough for the bolt to drop into.
__________________
2008 Cougar 5th Wheel 27RKS
2005 2500 GMC Duramax
Festus2 is offline   Reply With Quote
Old 05-14-2013, 08:23 PM   #7
KenBob
Senior Member
 
Join Date: Mar 2011
Location: California
Posts: 235
This is what we used.
http://www.lowes.com/ProductDisplay?...llow&cId=PDIO1

Here is a link to a thread on this subject.

http://www.keystonerv.org/forums/sho...ight=door+bolt
KenBob is offline   Reply With Quote
Old 05-16-2013, 09:18 AM   #8
isosceles
Junior Member
 
Join Date: Mar 2013
Location: Canada
Posts: 9
Seal tightness

I believe a lot of the issue has to do with the gasket around the door. It is very hard to close the door (which is good as it makes a nice seal, and keeps out fumes whilst the ATVs are in there).

I am betting that with the door pushing that hard on the latch, any movement causes the latch to back out slightly, and the pressure keeps it in place. Eventually the door will pop open ones the latch creeps out enough.

From the looks of my door, I would need two of the gate clasps to keep it closed, as I am sure it would open in the above listed manner if there was just one the the bottom.

INFACT, I just thought of a solution / something to try......... if it is indeed the latch creep opening the door, and not extreme flex of the trailer. Replacing the standard latch with an actual dead bolt that cannot creep out would do the trick. Normal door latches can move in/out all the time, whereas a dead bolt is locked solid.

We never close that door while camping anyway, and it would be very easy to try. I will try it out and post my findings.

CheerS!
isosceles is offline   Reply With Quote
Old 05-16-2013, 12:32 PM   #9
abneynormal
Senior Member
 
abneynormal's Avatar
 
Join Date: May 2013
Location: alabama
Posts: 272
i fixed it

had the problem on my 3912. took a metal carbide cutter on a drill and ground the door plate hole where it had slop in the door. ie made the hole bigger. it hasn't popped open since.
abneynormal is offline   Reply With Quote
Old 05-16-2013, 06:44 PM   #10
40 Acres
Junior Member
 
Join Date: May 2013
Location: Pennsylvania
Posts: 14
Our 342 does the same trick and the in-laws 3750FL Montana always pops their bathroom door which is in a similar location, but without the airtight seal.

Deadbolt style knob sounds like a good fix, although we keep ours closed a lot, so access on each side is preferred.
__________________
Out back: 2013 Fuzion 342 Monster Pkg with patio
Out front: 2006 F-350 Lariat FX4 SRW, CC, LB, 6.0 with 18k Reese Signature Series
Inside: 2002 FXSTSI, 2009 XL1200C
40 Acres is offline   Reply With Quote
Old 05-20-2013, 06:33 PM   #11
abneynormal
Senior Member
 
abneynormal's Avatar
 
Join Date: May 2013
Location: alabama
Posts: 272
mine did

I used a carbide cutter on a cordless drill and enlarged the striker plate hole. the door has room to flex so it wont pop open. it has never came open since I made the hole bigger
abneynormal is offline   Reply With Quote
Old 05-22-2013, 01:38 PM   #12
Scott L
Junior Member
 
Join Date: Apr 2013
Location: Alamogordo, NM
Posts: 11
Keeping the door closed

I removed the striker plate and sloted the screw holes a 1/4 of an inch. The took a wood bur and removed a 3/8 in of the hole in the wood frame. Now the door latch full engages the door frame while keeping a good seal. Hope this helps!!!!
Scott L is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by the Keystone RV Company or any of its affiliates in any way. Keystone RV® is a registered trademark of the Keystone RV Company.


All times are GMT -8. The time now is 11:35 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.