2013 fuzion 310

[Cnc_hemi]

I have a Fuzion310. It has 2 awnings and the rear awning arm is mounted right above the refrigerator vent. So when it rains with the awning in water pours down the arm and soaks the inside of the vent area and gets in to the inside of the coach. Has anyone had this problem with theirs and what did keystone do to fix it? Thanks

[tileman]

Yep had a flood in the vent area.

I removed the refrigerator and put a good coat of 100% epoxy on the wood to seal it up and along the sides of the cabinet like base to keep them from getting wet.

Its been over a year and all is still good.
I had made a little thing that took to water away from that area as it came down the awning arm.

But I have lost it and need to make a new one it just was a old plastic material that was wedge into the awning arm to keep the water out.

But take a look at the wood floor that the refrigerator sets on mine was wet and had to redo. I just did it myself cause the dealer is like 100 miles one way.

[Cnc_hemi]

Cool. I live close to my dealer and I have a couple other small issues that need to be taken care of under warranty. I will keep what you did in mind. If they don't fix it. Thanks