Lippert 3.0 Leveling System.... with a twist.

[JMaster]

Hey everyone! So today I ran into an issue that I had never seen before. I moved my Sprinter Fifthwheel to a new storage location that is level and very nice. However..... When going to auto level my rig I noticed that when the back jacks started their portion of the grounding they went down.... and kept going. Then the system shut off automatically and turned back on. I then had the dreaded jack error message. I then went through the procedure to clear that error and retried to auto level once again. This time the back jacks grounded and then during the front jack check, the nose dived a bit and the system once again shut off and gave me the jack error message. Has anyone else seen the system shut off like this??

I’m wondering if I should try to clear the error again and then do a zero calibration of the system and see if that fixes it?

Any thoughts would be appreciated. I use to be an RV tech actually but this one has me a bit stumped. Batteries are fully charged and I tried with and without shore power. I also checked all the connections at the 4 point panel and all were good.

Thanks!!!