Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 

Go Back   Keystone RV Forums > Keystone Tech Forums > Repairs & Maintenance
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 01-17-2019, 10:38 PM   #1
Jgraham14813
Member
 
Join Date: Jan 2019
Location: Wellsville
Posts: 67
Shore power not enough?

Ok you guys have helped me get power to the slide now just wondering why is shore power not enough to close my slide why do you also need a fully charged battery to close it I’m just confused on this as I know the shore power is supplying a constant 12+ volts to the slide motor or st least should be. Granted I have a 25 ft house cord attached to the 30 amp supply cord and on a 15 amp breaker but nothing else is on or running
Jgraham14813 is offline   Reply With Quote
Old 01-18-2019, 12:00 AM   #2
JRTJH
Site Team
 
JRTJH's Avatar
 
Join Date: Mar 2011
Location: Gaylord
Posts: 26,846
The 12 VDC shore power converter/charger is nothing more than a stepdown transformer and a bridge rectifier circuit. That device is simply not capable of maintaining the load required without "backup additional power" from the battery. That's why there's a "BIG RED/WHITE WARNING" on the wall next to the slide switch that says, "Do not operate this switch without a fully charged battery connected to the circuit"

Ignoring that warning is a great way to find out exactly how much a replacement converter/charger costs... It likely won't happen the first or even the second time, but every time you push that switch without a battery, you melt some of the insulation off the transformer windings, Once you've damaged enough of the windings, it stops working and the spiked output blows a transistor in the bridge circuit and your lights get dim (permanently) until you replace the converter charger....
__________________
John



2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
JRTJH is offline   Reply With Quote
Old 01-18-2019, 02:22 AM   #3
Jgraham14813
Member
 
Join Date: Jan 2019
Location: Wellsville
Posts: 67
I don’t have that warning on mine lol
Jgraham14813 is offline   Reply With Quote
Old 01-18-2019, 07:07 AM   #4
ChuckS
Senior Member
 
ChuckS's Avatar
 
Join Date: Mar 2014
Location: Mountain Home, Idaho
Posts: 2,977
Your converter will run everything in the rig that requires DC power with the exception of the slides/landing gear...

You need the reserve capacity in amperage from the battery to operate hyd pump motor for slides and LG.. or electric motors for slides/LG

Another example to illustrate need for good battery is.. your car is dead ...disconnect the cables from battery and connect to a 75 amp charger and try to start the engine..
.. engine won’t turn over and charger will hum loadly and hopefully tripmits breaker..

And on my 2014 Alpine there is NO warning anywhere regarding operation of slides or LG without having battery turned on... I’m guessing Keystone firgures dealership would explain this to buyer ....yea right....
__________________


2007 GMC Classic club cab 4x4 Duramax LBZ
2014 Alpine 3010 RE. 34 foot fifth wheel
ChuckS is offline   Reply With Quote
Old 01-18-2019, 07:11 AM   #5
chuckster57
Site Team
 
chuckster57's Avatar
 
Join Date: Jul 2014
Location: Modesto
Posts: 20,237
Decal/sticker seems to be hit/miss on pretty much every RV.
__________________

2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.

Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
chuckster57 is offline   Reply With Quote
Old 01-18-2019, 08:21 AM   #6
JRTJH
Site Team
 
JRTJH's Avatar
 
Join Date: Mar 2011
Location: Gaylord
Posts: 26,846
With a 2001 RV that was previously owned by someone else, who knows what might have happened with decals, or for that matter, switches, circuit breakers, fuses, wiring, etc.... Owners have some very different ideas on what stays, what looks bad and what needs to go. Some even question why there's a red/white EXIT decal over the only door leading outside... Hmmm

The owner's manuals from as far back as are published on the Keystone website have a warning about not operating the slides without a fully charged battery connected to the circuit. The manuals don't explain why, they just say, "Don't do it"...

Here's a few photos I picked up from the internet:
Attached Thumbnails
Click image for larger version

Name:	SLIDE WARNING LABEL A.jpg
Views:	217
Size:	116.5 KB
ID:	19947   Click image for larger version

Name:	SLIDE WARNING LABEL B.jpg
Views:	223
Size:	269.1 KB
ID:	19948   Click image for larger version

Name:	SLIDE WARNING LABEL C.jpg
Views:	174
Size:	49.9 KB
ID:	19949   Click image for larger version

Name:	SLIDE WARNING LABEL.jpg
Views:	172
Size:	147.5 KB
ID:	19950  
__________________
John



2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
JRTJH is offline   Reply With Quote
Old 01-18-2019, 09:25 AM   #7
Laredo Tugger
Senior Member
 
Join Date: Apr 2018
Location: South US
Posts: 712
Whenever I operate the slides or LG in a non powered mode, battery only I connect the trailer to the TV for extra battery power, so I thought.
Am I correct on this or does it not make a difference?
Thanks
RMc
Laredo Tugger is offline   Reply With Quote
Old 01-18-2019, 09:45 AM   #8
JRTJH
Site Team
 
JRTJH's Avatar
 
Join Date: Mar 2011
Location: Gaylord
Posts: 26,846
I don't think it makes a hill of beans difference whether the trailer is connected to the truck, shore power or is disconnected from both. The only "end result difference" is the battery charge level at the end of slide/LG operation. If connected to the tow vehicle (and it's running) you'll "pull a little amperage" from the TV's alternator via that 12/14 ga charge line. If you're connected to shore power, you'll pull "a little amperage" via the converter/charger. If you're disconnected, you won't pull those "few amps"... but as soon as you do plug into shore power or the tow vehicle, either of those systems will work to recharge the battery. So, an hour or so after opening the slide, whether the truck/shore power/solo battery is used, you'll be "about the same status.

About the only "consideration" I use is that if I'm going to be dry camping, I try to leave the tow vehicle connected during setup. That's only to delay the need to start the generator for a few hours longer than if the tow vehicle was not connected. Otherwise there's not much difference.
__________________
John



2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
JRTJH is offline   Reply With Quote
Old 01-18-2019, 09:47 AM   #9
hankpage
Site Team
 
hankpage's Avatar
 
Join Date: Jun 2009
Location: Venice
Posts: 5,346
Quote:
Originally Posted by Laredo Tugger View Post
Whenever I operate the slides or LG in a non powered mode, battery only I connect the trailer to the TV for extra battery power, so I thought.
Am I correct on this or does it not make a difference?
Thanks
RMc
If the TV is running , yes, it helps.
__________________
Hank & Lynn
2007 Cougar 290RKS, E-Z Flex, 16" XPS RIBs ( SOLD .. Gonna miss her ... looking for new 5r)
2004.5 Dodge 2500 QC, LB, 5.9HO, WestTach gauges, Ride-Rite
hankpage is offline   Reply With Quote
Old 01-18-2019, 11:28 AM   #10
sourdough
Site Team
 
Join Date: Feb 2014
Location: W. Texas
Posts: 17,601
Our '14 has the red/white tag right beside the slide rocker switches.
__________________
Danny and Susan, wife of 56 years
2019 Ram 3500 Laramie CC SWB SB 6.4 4x4 4.10
2020 Montana High Country 331RL
sourdough is offline   Reply With Quote
Old 01-18-2019, 07:40 PM   #11
Steveo57
Senior Member
 
Join Date: Dec 2017
Location: Lisbon
Posts: 551
I would say it depends. There might be slides that draw more than the converter can supply?

My slide motor is max rated at 30 amps and is fused with a 30 amp fuse. I haven't seen what it draws while in operation but I know its not going to be over 30 amps or it will blow the fuse.

The converter in my rig is rated for 55 amps so I don't see any reason why it wouldn't operate the slide without a battery. As long as I didn't have a bunch of the other DC loads on there should be more than enough capacity to operate the slide.

I would venture a guess that those stickers are just stuck on every unit because the boss said to. My sticker says "Battery hookup required for slide operation". So does that mean don't operate the slide without a battery or does it mean that the slide won't operate without a battery?

I'll have to do some experimentation this spring when I open it up and put the battery back in.
__________________
2018 Keystone Cougar 22RBS
2020 Ford F-350 XLT SC SRW 6.7l Powerstroke.
Steveo57 is offline   Reply With Quote
Old 01-18-2019, 08:19 PM   #12
sourdough
Site Team
 
Join Date: Feb 2014
Location: W. Texas
Posts: 17,601
Quote:
Originally Posted by Steveo57 View Post
I would say it depends. There might be slides that draw more than the converter can supply?

My slide motor is max rated at 30 amps and is fused with a 30 amp fuse. I haven't seen what it draws while in operation but I know its not going to be over 30 amps or it will blow the fuse.

The converter in my rig is rated for 55 amps so I don't see any reason why it wouldn't operate the slide without a battery. As long as I didn't have a bunch of the other DC loads on there should be more than enough capacity to operate the slide.

I would venture a guess that those stickers are just stuck on every unit because the boss said to. My sticker says "Battery hookup required for slide operation". So does that mean don't operate the slide without a battery or does it mean that the slide won't operate without a battery?

I'll have to do some experimentation this spring when I open it up and put the battery back in.

I think your question was answered in the previous posts. If you think the converter is more than able, despite the warnings from the stickers the manufacturer placed (because the boss said to) and warnings from others, maybe you should just leave the battery(s) out and operate the slides until "something" gives or you are satisfied, that would probably answer your question - the good thing is that converters are cheap....
__________________
Danny and Susan, wife of 56 years
2019 Ram 3500 Laramie CC SWB SB 6.4 4x4 4.10
2020 Montana High Country 331RL
sourdough is offline   Reply With Quote
Old 01-18-2019, 08:40 PM   #13
JRTJH
Site Team
 
JRTJH's Avatar
 
Join Date: Mar 2011
Location: Gaylord
Posts: 26,846
Quote:
Originally Posted by Steveo57 View Post
I would say it depends. There might be slides that draw more than the converter can supply?

My slide motor is max rated at 30 amps and is fused with a 30 amp fuse. I haven't seen what it draws while in operation but I know its not going to be over 30 amps or it will blow the fuse.

The converter in my rig is rated for 55 amps so I don't see any reason why it wouldn't operate the slide without a battery. As long as I didn't have a bunch of the other DC loads on there should be more than enough capacity to operate the slide.

I would venture a guess that those stickers are just stuck on every unit because the boss said to. My sticker says "Battery hookup required for slide operation". So does that mean don't operate the slide without a battery or does it mean that the slide won't operate without a battery?

I'll have to do some experimentation this spring when I open it up and put the battery back in.

You can certainly do whatever you wish with your equipment. But, to put the part you don't understand into an example you might find easier to believe.....

If you're around here, you know you can walk carefully across a lake with 2" of ice on it. If you try to "jump across that 2" of ice" you're going to get wet and cold.

Now, your 12 VDC converter can support the "slow gradual buildup" of demand to around 50 amps (if you have a 55 amp converter). But if you try to "jump on the ice" by slamming an immediate 30 amp load on the windings of the transformer and the transistors in the bridge circuit, it will not sustain that abuse (yes it's a demand greater than the design so it's abuse) for very long before it will "crap on you"....

The reason for having a battery connected to the circuit is to prevent the slide motor from "jumping on the thin ice".... However, experiment this spring and run your slide in and out 5 or 6 times without a battery, then reach behind the power center and see if you can hold your hand on the converter casing. My bet is you'll have blisters from the case being hotter than, well, just try it and you'll see.
__________________
John



2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
JRTJH is offline   Reply With Quote
Old 01-18-2019, 08:54 PM   #14
Steveo57
Senior Member
 
Join Date: Dec 2017
Location: Lisbon
Posts: 551
Quote:
Originally Posted by sourdough View Post
I think your question was answered in the previous posts. If you think the converter is more than able, despite the warnings from the stickers the manufacturer placed (because the boss said to) and warnings from others, maybe you should just leave the battery(s) out and operate the slides until "something" gives or you are satisfied, that would probably answer your question - the good thing is that converters are cheap....
The inrush current on these little motors will be high for a very short time but I would think the converter would handle it. And there's no doubt that the converter can handle the running amps. I just like to have an understanding of the reason for these types of warnings.

I know back in my Navy days we had a big DC motor for emergency propulsion on my submarine and to get it going we would slowly rotate a manual handwheel which cut out starting resistors as the motor came up to speed. We had a really big battery to operate it!
__________________
2018 Keystone Cougar 22RBS
2020 Ford F-350 XLT SC SRW 6.7l Powerstroke.
Steveo57 is offline   Reply With Quote
Old 01-24-2019, 08:59 AM   #15
Local150
Senior Member
 
Join Date: Aug 2018
Location: prophetstown
Posts: 318
If I am dry camping I run the slide before I unhook power from tv,,,in shore power camping I don't move slide until shore power is connected. It helps leaving tv hooked up
Local150 is offline   Reply With Quote
Old 01-24-2019, 09:21 AM   #16
cmg1
Junior Member
 
Join Date: Dec 2013
Location: Poway, CA
Posts: 6
If the risk is that big why isn't there a breaker or a fuse on the circuit going through the transformer?
__________________
______________________________
2014 Bullet Premier 22RBPR
2005 Toyota 4Runner 4WD V8
cmg1 is offline   Reply With Quote
Old 01-24-2019, 10:12 AM   #17
dpankowski
Junior Member
 
Join Date: Feb 2017
Location: Tooele
Posts: 21
I keep my 5th wheel in storage for the winter. I remove the batteries and keep them on a battery tender all winter in the garage.

My question is can I connect the TV and keep it running and operate the slides without reinstalling the battery?

This is the first winter i've had to put the trailer in storage, usually i keep the batteries installed and leave the unit plugged into a/c servie.
thanks
__________________
2017 Keystone Cougar 336 BHS

2011 Ford F-350 6.7SD Crew cab 8' box factory 5th Wheel hitch package
dpankowski is offline   Reply With Quote
Old 01-24-2019, 10:23 AM   #18
Local150
Senior Member
 
Join Date: Aug 2018
Location: prophetstown
Posts: 318
Quote:
Originally Posted by dpankowski View Post
I keep my 5th wheel in storage for the winter. I remove the batteries and keep them on a battery tender all winter in the garage.

My question is can I connect the TV and keep it running and operate the slides without reinstalling the battery?

This is the first winter i've had to put the trailer in storage, usually i keep the batteries installed and leave the unit plugged into a/c servie.
thanks
Personally I think it would work, but I wouldn't do it,, on my rv I will avoid having a possibility of having to replace the converter, as it's a,,,,,,,,,, to get to
Local150 is offline   Reply With Quote
Old 01-24-2019, 10:51 AM   #19
dpankowski
Junior Member
 
Join Date: Feb 2017
Location: Tooele
Posts: 21
Quote:
Originally Posted by Local150 View Post
Personally I think it would work, but I wouldn't do it,, on my rv I will avoid having a possibility of having to replace the converter, as it's a,,,,,,,,,, to get to
Thanks, but I think you misunderstood my question. I don't have any a/c in the storage area and want to use the TV to operate the slides without batteries installed.
__________________
2017 Keystone Cougar 336 BHS

2011 Ford F-350 6.7SD Crew cab 8' box factory 5th Wheel hitch package
dpankowski is offline   Reply With Quote
Old 01-24-2019, 11:06 AM   #20
Local150
Senior Member
 
Join Date: Aug 2018
Location: prophetstown
Posts: 318
Quote:
Originally Posted by dpankowski View Post
Thanks, but I think you misunderstood my question. I don't have any a/c in the storage area and want to use the TV to operate the slides without batteries installed.
You are right,, I did misunderstand you,, sorry,, I would think that would be ok,
Local150 is offline   Reply With Quote
Reply

Tags
power

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by the Keystone RV Company or any of its affiliates in any way. Keystone RV® is a registered trademark of the Keystone RV Company.


All times are GMT -8. The time now is 09:55 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.