It is right on the backside of the heater, usually accessible inside a cupboard or behind a removable panel.
To verify position, shut off the propane or 110vac so that the heater is completely off. Shut off your water pump or city water. Remove the drain plug. Water should begin to drain from the heater. Then turn on the water pump or city water briefly. If water shoots out the drain hole under pressure, that is the normal position. If the water just continues to drain without pressure, that is the bypass position.
__________________
'11 Cougar 326MKS loaded with mods
'12 Ford F250 SuperCab 6.7 PowerStroke Diesel
Amateur Radio: KD2IAT (146.520) GMRS: WQPG808 (462.675 TPL 141.3)
|