Go Back   Keystone RV Forums > Keystone Tech Forums > Tires, Tires, Tires!
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 11-29-2018, 01:17 PM   #21
JRTJH
Site Team
 
JRTJH's Avatar
 
Join Date: Mar 2011
Location: Gaylord
Posts: 13,428
Quote:
Originally Posted by jadatis View Post
Used the tirespecifications you gave and added 10% to the2020lbs topicstarter gave.
Then the 65psi tire would need 55psi , I calculated with the safer official European formula, ( I once got hold of, and went running with.
That they give 65 psi is general advice for trailers.
Most trailer tires are ST wich are calculated in maxload for 65mh. This gives no reserve anymore for things like unequall weight, pressure loss, etc.
Thats the reason for that standard advice of 65 psi for D-load. E- load would need 70 psi for the 2540lbs maxload of D-load.
But if you are shure of the 2020 lbs a tire as you weighed( and I added 10% to cover unequall weight R/L) , the E load would need 60 psi.

When I calculate advice for trailers, I add 10% and lower maxload, as if its a Q speedrated tire, wich is calculated in maxload for 99mh.
Then you have the highest pressure, with max reserve, with still acceptable comfort and gripp.
Comfort for a traveltrailer, is that your screws wont tremble loose from the woodconstruction.

Can do that for you, but need more information.
fi if you have ST and if weighing was fully loaded.
Number of tires and axles.
Let's use a little "Cajun logic" and relate it to tire pressure. I don't go to the bank and withdraw $200 and toss $20 in the trash can on the way out the door. I don't go to Burger King, order two Whoppers and toss one in the trash on the way to the table, I don't buy tires with a specific rating and try to find ways to not use them fully.... If the tire is rated at 2400 lbs at 65PSI and 2800 pounds at 80 PSI, why toss that extra protection (weight carrying capacity) in the trash before hitching up the trailer???? Now, if that extra pressure was going to cause damage to the trailer, yes, I'd consider that aspect, but so far, NOBODY has ever documented to me that there is trailer damage incurred when running LRE tires at 80 PSI on a trailer suspension that was delivered from the factory with LRD tires rated at 65 PSI...... YMMV
__________________

__________________
John



2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
JRTJH is offline   Reply With Quote
Old 11-29-2018, 09:38 PM   #22
Genek
Junior Member
 
Join Date: Nov 2018
Location: Herndon
Posts: 4
Quote:
Originally Posted by sourdough View Post
I went from the same tire you had to the same E rated tires. My trailer is 10k gvw and runs about 9200 or so. I run my trailer tires at 80 psi and completely disregard the "tongue/pin weight". That is an ideal number but when you are driving down the road hitting frost heaves, pot holes, dips, jumps....each of those tires isn't carrying the "ideal" load. In many, if not most, they are way overloaded in some of those scenarios. As far as rougher ride, I've never seen it. Since going to the E tires vs the D tires my trailer actually rides better and nothing moves inside any longer. JMO/YMMV
Over or under pressure for your weight will cause improper wear of the tire. Thats the real issue with pressure rather than ride. We all know what a blow out costs us in damage to the trailer.
__________________

Genek is offline   Reply With Quote
Old 11-29-2018, 09:44 PM   #23
sourdough
Senior Member
 
Join Date: Feb 2014
Location: W. Texas
Posts: 5,837
Quote:
Originally Posted by Genek View Post
Over or under pressure for your weight will cause improper wear of the tire. Thats the real issue with pressure rather than ride. We all know what a blow out costs us in damage to the trailer.
I agree. Ride is probably irrelevant in any conversation regarding trailer tires. As far as "improper wear", I've never owned a trailer tire that I didn't get rid of while it still looked brand new....never know...
__________________
Danny & Susan wife of 50 years
2014 Ram 2500 6.4 4x4 CC
2014 Cougar High Country 319RLS
sourdough is offline   Reply With Quote
Old 11-30-2018, 03:14 AM   #24
flybouy
Senior Member
 
Join Date: Oct 2011
Location: Joppa, MD
Posts: 1,345
Some experience related advice.

Well now, is your head spinning from all the numbers ? The numbers may look like they came from Vegas odds makers but I'll make it easy as some others have done.
Get your E rated tires and have them mounted and balanced with new valve stems (bolt in metal stems are best). The installer should check the rims for max pressure of 80 psi but remind them to check it. Also research your specific rim for how it needs to be balanced, lug centric or hub centric. Search the forum and www on that for more info.
If you don't have av TPMS buy one. Again search it, lot's of info out there.

Now go enjoy your camping! This is just my advice from someone that's pulled boats, campers, utility trailer, and farm equipment (in my youth, long before I was old enough to get a drivers license) for 50 + years.
YMMV
__________________
2012 Laredo 303 TG
2010 F250 LT SCAB long bed 4X4 6.4 Turbo Deisel
flybouy is offline   Reply With Quote
Old 11-30-2018, 03:31 AM   #25
jadatis
Member
 
Join Date: May 2013
Location: Holland ( Europe)
Posts: 33
Topicstarter was worried about needed pressure, and I gave some calc to show, what is important for that, nothing more.
But in the end it could show that he( or she) yust needs the 80 psi to have maximum reserve.
Not for no reason ST tires have a high failure-rate.
And the E load tires are placed , because the D- load had to low safety-reserve.
jadatis is offline   Reply With Quote
Old 11-30-2018, 09:16 AM   #26
CWtheMan
Senior Member
 
CWtheMan's Avatar
 
Join Date: Feb 2010
Location: Taylors, SC
Posts: 1,239
Quote:
Originally Posted by jadatis View Post
Topicstarter was worried about needed pressure, and I gave some calc to show, what is important for that, nothing more.
But in the end it could show that he( or she) yust needs the 80 psi to have maximum reserve.
Not for no reason ST tires have a high failure-rate.
And the E load tires are placed , because the D- load had to low safety-reserve.
Here is one of the latest guides in print on the WWW that provides us with tire safety standards which also coincide with the governing bodies (DOT) regulations.

https://www.ustires.org/sites/defaul...TruckTires.pdf

The Recreational Vehicle Industry Association (RVIA) is a membership organization that often requires it participating members – about 98% of the RV trailer manufacturers – to go beyond the minimum safety requirements established by the governing body/industry standards.

Their newest requirement for members is to have them apply an available 10% in tire load capacity reserves above the trailer manufacturer’s certified GAWR values. That would mean that tires fitted to a 6000# GAWR axle would have to provide 3300# of load capacity with a set recommended cold tire inflation pressure.

Within that same RVIA document is a recommendation to no longer fit RV trailer wheels 14” or larger with bias ply tires.

Those are also factors you should try to work into your responses.
__________________
An Old Navy Aircraft Mechanic that writes about tires.
Our rig. NC mountain pull-off. US-19.
http://www.irv2.com/photopost/showfull.php?photo=35007
CWtheMan is offline   Reply With Quote
Old 11-30-2018, 10:03 AM   #27
ChuckS
Senior Member
 
ChuckS's Avatar
 
Join Date: Mar 2014
Location: Mountain Home, Idaho
Posts: 498
New standard probably explains why Keystone changed tire load range from E rated to G rated from 2014 to 2015.

Same specs from manufacturer on exact same model in one year. Same 7K axles... just increased tire size. It was a smart move on their part because E rated 10 ply tires on any size Keystone Alpine wont cut it.
__________________


2007 GMC Classic club cab 4x4 Duramax LBZ
2014 Alpine 3010 RE. 34 foot fifth wheel
ChuckS is offline   Reply With Quote
Old 12-06-2018, 07:50 AM   #28
Tireman9
Member
 
Join Date: Sep 2018
Location: Akron
Posts: 52
Quote:
Originally Posted by JRTJH View Post
Let's use a little "Cajun logic" and relate it to tire pressure. I don't go to the bank and withdraw $200 and toss $20 in the trash can on the way out the door. I don't go to Burger King, order two Whoppers and toss one in the trash on the way to the table, I don't buy tires with a specific rating and try to find ways to not use them fully.... If the tire is rated at 2400 lbs at 65PSI and 2800 pounds at 80 PSI, why toss that extra protection (weight carrying capacity) in the trash before hitching up the trailer???? Now, if that extra pressure was going to cause damage to the trailer, yes, I'd consider that aspect, but so far, NOBODY has ever documented to me that there is trailer damage incurred when running LRE tires at 80 PSI on a trailer suspension that was delivered from the factory with LRD tires rated at 65 PSI...... YMMV

Sorry, but you may have missed the point of adding a margin to the MINIMUM inflation. Maybe think this way. Assume your bank balance was tied to the DOW 500 with minuteby minute changes in value. If the value at 9AM was $1,123 and you knew you would be charged a $50 "Fee" if the balance dropped below $1,000 would you withdraw $123?


Your loading changes as you go around a corner. The Interply Shear (cause of belt separations) can go up by 20% or greater when you turn a sharp corner and your morning tire pressure will change by 2% for each change of 10F. With o psi margin that means that every day you would have to adjust the pressure based on that days temperature. Not fun so why not include a "cushion" of +10 % so you would only have to add air if the temperature dropped 50F.


Understand?
__________________
Retired Tire Design Engineer (40 years) On FMCA Tech Advisory Committee. Write a blog on RV Tire Safety. Read THIS post on Why Tires Fail.
Tireman9 is offline   Reply With Quote
Old 12-06-2018, 08:03 AM   #29
ctbruce
Site Team
 
ctbruce's Avatar
 
Join Date: Dec 2015
Location: Kansas City
Posts: 3,045
Quote:
Originally Posted by Tireman9 View Post
Sorry, but you may have missed the point of adding a margin to the MINIMUM inflation. Maybe think this way. Assume your bank balance was tied to the DOW 500 with minuteby minute changes in value. If the value at 9AM was $1,123 and you knew you would be charged a $50 "Fee" if the balance dropped below $1,000 would you withdraw $123?


Your loading changes as you go around a corner. The Interply Shear (cause of belt separations) can go up by 20% or greater when you turn a sharp corner and your morning tire pressure will change by 2% for each change of 10F. With o psi margin that means that every day you would have to adjust the pressure based on that days temperature. Not fun so why not include a "cushion" of +10 % so you would only have to add air if the temperature dropped 50F.


Understand?
I read John's post as saying fill them up to cold max to gain all of the reserve capacity available to you based on the tires. It makes NO SENSE to buy tires with extra capacity and then run them at less air pressure and not use the reserve.

I believe you're both saying the same things.....at least this time!
__________________

Chip Bruce, RPh
Kansas City, MO
2016 Impact 312
2017 Silverado 3500HD SRW
ctbruce is offline   Reply With Quote
Old 12-06-2018, 10:51 AM   #30
JRTJH
Site Team
 
JRTJH's Avatar
 
Join Date: Mar 2011
Location: Gaylord
Posts: 13,428
Quote:
Originally Posted by Tireman9 View Post
Sorry, but you may have missed the point of adding a margin to the MINIMUM inflation. Maybe think this way. Assume your bank balance was tied to the DOW 500 with minuteby minute changes in value. If the value at 9AM was $1,123 and you knew you would be charged a $50 "Fee" if the balance dropped below $1,000 would you withdraw $123?


Your loading changes as you go around a corner. The Interply Shear (cause of belt separations) can go up by 20% or greater when you turn a sharp corner and your morning tire pressure will change by 2% for each change of 10F. With o psi margin that means that every day you would have to adjust the pressure based on that days temperature. Not fun so why not include a "cushion" of +10 % so you would only have to add air if the temperature dropped 50F.


Understand?
Why not just run the tires at the maximum recommended pressure and gain the full advantage of their weight carrying capacity? Of course, that would be the simple solution, without all the "caluclations and percentages" and would completely ignore the DOW 500.....

Maybe, just maybe, if you had some boudin for lunch, you'd understand "Cajun logic" but it appears you haven't yet indulged in such a feast..... Almost "sinful" Pauvre Bte
__________________

__________________
John



2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
JRTJH is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by the Keystone RV Company or any of its affiliates in any way. Keystone RV is a registered trademark of the Keystone RV Company.


All times are GMT -8. The time now is 08:40 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.